Evertiq - First In Electronics News & Expo

Ad

Ad

Ad

Ad

Ad

Oulu-Factory-Finland

August 05, 2025
Finnish PCB manufacturer Aspocomp reported strong growth in both revenue and its order book for the first half of the year, turning to profit in the process.

Top-30

June 05, 2025
Evertiq has previously reported on the long-term decline of the European PCB industry. Back in the 1990s, the EU accounted for around 20–30% of global production. Today, that figure stands at just 2%. But who are the champions still holding strong in the storm?

Ad

Factory-Manu-Skytta-ceo-2024

April 30, 2025
Finnish PCB manufacturer Aspocomp reported a significant turnaround in its financial performance for the first quarter of 2025, coming close to achieving an all-time net sales record.

Factory-Manu-Skytta-ceo-2024

March 04, 2025
Finnish PCB manufacturer Aspocomp has reported significant improvements in its fourth-quarter performance, marking a strong conclusion to an otherwise challenging year in 2024.

Factory-Manu-Skytta-ceo-2024

October 23, 2024
Finnish PCB manufacturer Aspocomp says that the recovery in demand for its products began during the third quarter of 2024 – however, this was not yet reflected in the company's net sales.

Oulu-Factory-Finland

August 29, 2024
Finnish PCB manufacturer Aspocomp is lowering its financial guidance for the year 2024. The company now estimates that its net sales for 2024 will be below the 2023 level, and its operating result for 2024 will be clearly below the 2023 level.

Factory-Manu-Skytta-ceo-2024

May 22, 2024
Manu Skyttä, was appointed as the new President and CEO of Aspocomp Group ealier in February, has officially started in his new role.

Oulu-Factory-Finland

April 18, 2024
Aspocomp’s first-quarter net sales amounted to EUR 6.2 million, down 30% from EUR 8.9 million during the same quarter last year.

March 19, 2024
Manu Skyttä, PCB manufacturer Aspocomp's new President and CEO of Aspocomp, will assume his duties on May 20, 2024

PCBs-ceo-mikko-montonen

February 15, 2024
The Board of Directors of the Finnish PCB manufacturer has appointed Manu Skyttä as President and CEO, succeeding Mikko Montonen, who has agreed to step down from his role as President and CEO of the Aspocomp.

Oulu-Factory-Finland

January 11, 2024
Aspocomp is lowering its net sales and operating result forecast for 2023 due to low net sales, weakened product mix and significantly higher material costs.

January 09, 2024
Finnish PCB manufacturer Aspocomp is starting 2024 with some changes to the composition of its Management Team.

Oulu-Factory-Finland

January 04, 2024
Finnish PCB manufacturer Aspocomp has started 2024 by launching change negotiations on possible temporary layoffs and redundancies in Finland.

Drilling-Machine-Schmoll

November 01, 2023
The Finnish PCB manufacturer has invested in a new drilling machine for its factory.

Oulu-Factory-Finland

October 31, 2023
Finnish PCB manufacturer Aspocomp lowers its financial guidance for the year 2023. The company now estimates that its net sales for 2023 will be clearly below the 2022 level.

Oulu-Factory-Finland

August 30, 2023
FInnish PCB manufacturer Aspocomp’s change negotiations at its Oulu plant have ended. The goal of the negotiations was to prepare for a partial adjustment of production to correspond to temporarily low delivery volumes.

Oulu-Factory-Finland

August 15, 2023
PCB manufacturer Aspocomp has started change negotiations regarding possible temporary layoffs at its Oulu plant in Finland.

PCBs-ceo-mikko-montonen

March 20, 2023
While the company recorded a YoY decrease in net sales during the final quarter of the year, 2022 in total proved to be the best financial year in the history of Aspocomp in its current form.

PCBs-ceo-mikko-montonen

November 11, 2022
The Finnish PCB manufacturer says that its net sales continued to increase during the third quarter of 2022, its operating result improved further and the order book also remained strong.

factory-tour

April 26, 2022
The Finnish PCB manufacturer says that the first quarter is typically the most challenging of the year – however the company is off to a great start and is reporting both sales growth and a strong order book.

PCBs-ceo-mikko-montonen

March 10, 2022
The Finnish PCB manufacturer ended the fiscal year of 2021 on a strong note. The company is showing improved results across the board for the final quarter of the year, which also led to a 29% increase in net sales for the full year.

2020-production-woman-pcb

November 04, 2021
The Finnish PCB manufacturer experienced a record high demand during its third quarter 2021. Net sales increased 54% and the operating result improved greatly.

2020-production-woman-pcb

August 16, 2021
In addition to the PCB manufacturer's existing ISO9001, ISO14001 and IATF16949 certifications Aspocomp has now been accredited with AS9100 certificate.

PCBs-ceo-mikko-montonen

August 12, 2021
The continued recovery in the general market situation had a positive effect on Aspocomp's demand in the second quarter. Demand has started to grow, and the company’s order book level has risen significantly.

Oulu-Factory-Finland

April 28, 2021
The Finnish PCB manufacturer is reporting of a quarter where the pandemic was still making its mark on the company's business.

2020-production-woman-pcb

April 27, 2021
The Finnish PCB manufacturer says it has signed two significant project agreements for the supply of printed circuit boards to a customer within the automotive industry.

PCBs-ceo-mikko-montonen

March 19, 2021
The pandemic, and the restrictions that followed, are having a broad impact on the supply chains of the electronics industry – and also on customer orders, says the PCB manufacturer.

factory-tour

January 18, 2021
The Finnish PCB manufacturer has issued a profit warning saying the company’s operating result for 2020 will be slightly unprofitable.

factory-tour

January 11, 2021
The Finnish PCB manufacturer says it has appointed Mr. Antti Ojala – Vice President, Business Development and Deputy CEO – to its new Chief Operating Officer as of January 7, 2021.

2020-production-woman-pcb

November 06, 2020
The Finnish PCB manufacturer says that demand varied greatly between different customer segments. However, the semiconductor industry segment shined a light and became the largest segment during the quarter.

Atotech-line

October 16, 2020
In PCB design guidelines chip makers recommend using VLP (very low profile) and HVLP (hyper very low profile) copper to mitigate insertion loss caused by the skin effect – But do you know what happens to the copper surface roughness during PCB fabrication?

Atotech-line

October 14, 2020
The Finnish PCB manufacturer says that the investment is part of its strategy to better serve customers in high speed, high frequency environments. 5G, cloud computing, autonomous driving and other advanced applications are requiring increasingly higher frequencies and the copper surface roughness has a great impact on signal losses.

Load more news

© 2025 Evertiq AB September 15 2025 8:06 am V24.4.11-2

Ad