The electronics market in Europe – what needs to happen?
March 20, 2025
The EU Chips Act was introduced in several phases to the wider public from 2021 onwards and, following approval by the European Parliament and the Council, the regulation came into force on 21 September 2023.
Ad
Eurocircuits adds new direct imager to Hungarian site
August 20, 2024
There are now five direct imagers across Eurocircuits' multiple production sites following the installation of a new Ledia 6 Hyper direct imager at the company’s production site in Hungary.
Eurocircuits' Hungarian assembly unit gets new home
January 04, 2023
Eurocircuits has moved into numerous new buildings in Eger, Hungary, in recent years. In 2016, the company built a new building for assembly, and in 2021 a completely new company building was put into operation. In 2022, it was time once again to build a new building for the company's expanding assembly operations – three times bigger than the previous building from 2016.
RS teams up with Eurocircuits in new partnership
February 16, 2022
RS Components, a trading brand of Electrocomponents, says that it has expanded its Design and Manufacturing Solutions offering by partnering with specialist manufacturer and assembler of prototype and small series, Eurocircuits.
Eurocircuits looks back at a year of growth – despite the challenges
January 31, 2022
European PCB and EMS provider Eurocircuits looks back at 2021 and summarizes the year with a short but simple sentence; “You grow with the challenges”.
Eurocircuits: “we escaped a major disaster”
November 08, 2021
On October 27, a fire struck Eurocircuits operations in Hungary. The company says that the fire hit the pan of the Hot Air Level (HAL) machine in one of the buildings at the factory. The flames grew and spread quickly and soon the entire HAL department stood in flames.
Continued investments at Eurocircuits operations
May 11, 2021
Every year the company invests in its operations, something that has been seen as a key element to its success. And for 2021, the company will invest EUR 7 million in its two factories in Hungary and Germany.
Eurocircuits weathers the pandemic
January 27, 2021
Despite a challenging year, Eurocircuits can look back at a year of growth. The company is reporting turnover growth stemming from both its PCB manufacturing- and PCBA operations.
The dangers of Chinese dependancy for the European electronics industry
February 25, 2020
During the last 30 years, the European electronics industry has allowed itself to become heavily dependent upon the Chinese supply chain; and now we see the effects of that dependancy.
Eurocircuits biggest investment to date
December 02, 2019
One thing has always been clear for PCB manufacturer Eurocircuits – continues investments have been the key for the company’s success, and investments have been made.
Mycronic receives two different full-line solutions orders
August 20, 2019
Swedish high-tech company, Mycronic, says it is receiving high interest from customers for the new MYPro Line, its complete SMT assembly solution designed for smart factory connectivity, comprising of jet printing, 3D SPI, pick-and-place, 3D AOI and intelligent storage solutions.
Sponsored content by Eurocircuits
Linköpings University Formula Student
As one of their main sponsors, Eurocircuits receives an update from the Linkoping Formula Student
Sponsored content by Eurocircuits
University of Patras Racing Team
As one of their main sponsors, Eurocircuits receives an update from the university of Patras Racing Team.
Sponsored content by Eurocircuits
Looking Back at 2016
Eurocircuits has shown a consistent growth in customers and orders over the last 2 decades. 2016 has been another successful year with a consolidated turnover including PCB services, eC-equipment and consumables exceeding 21,6 million Euro. This growth allows us to continue to develop new products and services for our customers. We will continue to invest in new equipment and new processes to keep you at the cutting edge of PCB technology, and to provide more of the tools that will help you deliver your products to market on time and on budget.
Sponsored content by Eurocircuits
Eurocircuits PCB's In The Most Efficient Urban Concept Hydrogen Car
Green Team Twente is the multidisciplinary student team, sponsored by Eurocircuits, that builds a hyper-efficient hydrogen car. Since 2012, the year Green Team Twente was born, we have been building fuel-efficient hydrogen cars at the University of Twente in Enschede, the Netherlands. Our goal is to drive as efficient as possible and to show the world that driving on hydrogen is already a great alternative to driving on fossil fuels, next to battery electric vehicles. We do this by building cars that look similar to city cars, allowing people to see themselves driving in them in the near future.
Eurocircuits invests in direct imaging for its Aachen facility
October 03, 2016
Eurocircuits regularly invests in its production facilities. Last year the company’s Hungarian production got a new a Ledia direct imager. This year though – its time for the German facility.
Eurocircuits Hungary – from start to finish
September 02, 2016
PCB manufacturer Eurocircuits recently completed the construction of its second manufacturing facility in Hungary – the company have now published a time lapse movie that follows the full construction.
Eurocircuits: 25 years in and still growing
June 09, 2016
While celebrating their 25th anniversary, Eurocircuits officially opened their new building in Hungary.
Eurocircuits completes second building in Hungary
May 03, 2016
Back in 2014 the company planned to expand and extend the housing for its Eurocircuits kft facility in Eger. Following preparations in 2015, construction started in July 2015.
Nifty solution to solve parcel delivery problems
May 21, 2015
Not being able to stay at home to receive and sign off on your delivery, instead having to go to a pick up spot several miles away – I know, it's a real pain. Sure it might be one of those first world problems, but its still a problem.
Eurocircuits installs Ledia V5 DI
February 25, 2015
Eurocircuits is running UCAMCO's Ledia V5 direct imaging system at it's Hungarian plant in Eger.
Eurocircuits purchases Ledia 5S direct imager
December 08, 2014
Eurocircuits, a European PCB prototype manufacturer has purchased a Ledia 5S direct imager from Ucamco for its manufacturing facility in Eger (Hungary).
Eurocircuits adds support engineer for Spain and Portugal
December 03, 2014
Eurocircuits has appointed Claudio Cardoso Guardao as Customer Support Engineer for Spain and Portugal.
Eurocircuits appoints new UK Sales Manager
February 03, 2014
Following the retirement of Patrick Martin, Eurocircuits NV, has appointed Steve Jones as the new UK and Ireland Sales Manager, effective from 1 February 2014.
Dirk Stans hints about the future
November 15, 2013
Dirk Stans from Eurocircuits came by the booth during productronica and told us a couple of interesting bits about new developments at Eurocircuits.
Eurocircuits' 2013 is looking to be a good year
October 10, 2013
“In the first nine months of this year we grew against the first nine months of last year: 16% in customers, 10% in PCB orders and 2% in PCB sales,” said Dirk Stans, co-founder and co-owner of Eurocircuits.
TV: Evertiq with EuroCircuits
May 29, 2013
EuroCircuits came by the evertiq booth to talk about the business within the Benelux region.
Farnell partner up with Eurocircuits
May 13, 2013
Farnell, a part of Premier Farnell, announces a collaboration with Eurocircuits to provide quick-turn bare board PCB prototyping services for its customers in Europe.
Eurocircuits opens PCB plant in India
March 18, 2013
The new production facility in Gandhinagar, Gujarat, India, will service the Asian-Pacific market.
TV: Eurocircuits talks Europe
November 14, 2012
Dirk Stans from Eurocircuits relates his views on the European PCB industry, straight from the electronica-floor.
Eurocircuits teams with Elsyca
January 10, 2012
Eurocircuits has teamed up with Elsyca, a Belgian research company specialising in advanced electrochemical modelling, to implement a plating solution using Elsyca’s Intellitool.
Load more news