Evertiq - First In Electronics News & Expo

Ad

Ad

Ad

Ad

Ad

Sponsored content by Würth Elektronik eisos

Thermal_700x300px

Effective thermal management is essential to ensure the reliability and longevity of electronic systems. Würth Elektronik provides advanced thermal interface materials - gap fillers and heat spreaders - that enhance heat transfer and support stable system performance.

Ewelina-Bednarz_Column-1

December 17, 2025
During this year’s Evertiq Expo in Kraków, the topic of defense electronics filled the conference room to capacity. The top list of defense companies I presented turned out to be only a starting point for conversations that continued long after the session had ended. Behind each of these manufacturers stand dozens of electronics suppliers: semiconductor producers, PCB and RF module manufacturers, and specialized EMS companies. So I asked myself a simple question: which defense technologies drove electronics demand most strongly in 2025? Let’s look at them from the industry’s point of view rather than from a catalogue of weapon systems.

Ad

Staubli-Robotics-controller

September 19, 2025
EMS provider Scanfil has entered into a strategic partnership with Stäubli. Leveraging its manufacturing expertise, Scanfil will produce controllers designed for Stäubli’s 4-axis robots at its Suzhou factory.

Mades

August 04, 2025
MADES employs around 100 people and generated sales of approximately EUR 29 million in the 2024 financial year. The company focuses on electronics solutions for the A&D market, which accounts for the majority of its revenue.

solar

April 07, 2025
The round was led by Japan-based venture firm UTEC with participation from British International Investment, SE Ventures, and Riverwalk Holdings. Aerem’s existing investors Blume Ventures and Avaana Capital also participated.

electric-car_4

March 28, 2025
Ecofy plans to finance over 1 million electric vehicles and more than 1.5 GW of rooftop solar in India within the next 6-7 years.

Dayton-HQ

January 29, 2025
Libra Industries has expanded its machining capabilities at its corporate headquarters in Dayton, Ohio, with new equipment aimed at increasing precision and efficiency.

laser-system

December 11, 2024
Industrial laser systems developer Laser Photonics Corporation, and its recently acquired subsidiary Control Micro Systems (CMS), are expanding their PCB Marking technology development program targeting the semiconductor and electronics market.

Mycronic-MYPro-series-A40DX

October 24, 2024
Z-AXIS, a provider of electronic design and manufacturing services, says it's the first company on the US East Coast to install Mycronic MYPro series A40DX pick-and-place machines.

headquarters

May 22, 2024
When technology undergoes rapid advancements, managing a consistent and long-term supply chain can be a challenge. to address this issue, NXP has partnered with Rochester Electronics for continued customer support on active and obsolete devices.

boundry-switzerland

April 04, 2024
EMS provider, the Cicor Group has completed the acquisition of TT Electronics IoT Solutions Ltd. with three production sites in the UK and China.

Radeberg-production-site

March 05, 2024
Cicor has signed an agreement to acquire TT Electronics IoT Solutions Ltd, with three production sites in the UK and China, from TT Electronics for GBP 20.8 million.

PCB-factory-Vilnius-render

November 13, 2023
Adeon Technologies, a Dutch distributor of equipment for the European PCB industry, has received multiple purchase orders from Teltonika to supply the company with numerous types of equipment for their new PCB manufacturing plant in Vilnius, Lithuania.

Sponsored content by Seica

PROD_2023

Accelerating innovation has always been a touchstone of Seica’s approach to providing solutions to the electronics industry, so visitors to Seica’s booth at Productronica 2023 will see full alignment with this year’s theme in the latest, leading-edge, completely automated test solutions on display in Booth A1-445 as well as the fully automated selective soldering and optical inspection solutions on show at the Seica Automation Booth A3-335.

Groundbreaking-Opera-Lund

September 26, 2023
Swedish manufacturer of network cameras, access control, and network audio devices, Axis, has officially broke ground on Opera, the new seven-story Axis office and logistics building in Lund, Sweden.

invests-Schmoll-drilling-milling-machine

April 25, 2023
German PCB manufacturer Ilfa has upgraded its machine park, adding new drilling and milling technology to its manufacturing operation.

grand-opening-mexico-2023

March 27, 2023
The company's new 500,000-square-foot facility in Arteaga, Mexico, will produce Phillips Industries and Phillips Connect products for its North American customers.

MV-3XL-OMNI

February 06, 2023
Incap Electronics UK Ltd. has purchased a Mirtec MV-3XL OMNI with increased maximum PCB load size, angled cameras and Z-axis via Bentec Ltd.

fold-4

January 16, 2023
Annual global shipments of foldable smartphones are projected to climb from around 12.8 million units for 2022 to around 18.5 million units for 2023, says TrendForce in its latest report on the market for OLED displays.

December 02, 2022
ST has introduced LSM6DSV16X, the flagship 6-axis inertial measurement unit (IMU) embedding ST’s Sensor Fusion Low Power (SFLP) technology, Artificial Intelligence (AI), and adaptive-self-configuration (ASC) for superior power optimization.

Sponsored content by Cicor Management AG

ENG

Cicor site Bedford (Axis Electronics Ltd.) pursuit to achieve perfection for its customers

bedford-site

August 10, 2022
Swiss EMS provider Cicor Group has been awarded with a major multi-year follow-up business for a total value of around CHF 30 million (EUR 30.8 million) by an unnamed European manufacturer of specialised aircraft solutions.

June 22, 2022
Southwest Systems Technology, Inc., announces that it now represents VJ Electronix, Inc. X-ray inspection systems in the states of Texas, Oklahoma, Arkansas and Louisiana.

boundry-switzerland

June 16, 2022
EMS provider Cicor Group says that it expects a sales growth of around 30% in the first half of 2022 compared to the same period in 2021 as a result of acquisitions made and the successful management of challenges in the current difficult business environment.

Sponsored content by Rehm Thermal Systems GmbH

Advertorial_Startbild_738_x300_EN

Cost pressures are also constantly growing in medical technology. As a result, small batch series in particular, which, in the past, were often still produced manually, are now also produced by a fully automated process. This has a whole host of advantages: These include the reduced cycle time, increased process reliability thanks to eliminating manual intervention and assured traceability of all process-relevant parameters. Rehm Thermal Systems produces high-end soldering systems for electronics manufacturing, and also very flexible dispensing systems which can be individually adapted to customer requirements.

boundry-switzerland

December 01, 2021
Cicor Group announces today that the acquisition of all shares of the UK-based Axis Electronics has been successfully closed.

November 17, 2021
Saki Corporation, an innovator in the field of automated optical and X-ray inspection equipment, will be exhibiting at productronica 2021 in Munich, Germany.

boundry-switzerland

November 11, 2021
Swiss EMS provider, Cicor Group, announces that it has acquired 100% of the shares of the UK-based Axis Electronics. With this first acquisition within the group's recently announced growth strategy, Cicor strengthens its position in strategically targeted markets and expands its European footprint with a site in the UK.

raq-issue-183-top-image

October 22, 2021
Question: What is a four-quadrant power supply?

Sponsored content by Würth Elektronik eiSos

de_MEMS-Sensor_739x300_1_we_eiSos_Native_ADWeb

With its integrated temperature sensor, the WSEN-ITDS directly outputs calibrated and temperature-compensated data. The tiny 3-axis acceleration sensor can easily be deployed in a wide range of applications.

Sponsored content by SAKI

SAKI_AXI_Productronica_banner12_Evertiq_739x300

Discover how for even the most demanding high-end manufacturing requirements you can achieve the most effective, safe and reliable automated in-line 3D X-ray inspection that delivers clear and detailed images, ensures fast response time and lowers the cost of human intervention and maintenance.

factory-2021

August 06, 2021
Following a period, very much affected by the pandemic, with large fluctuations in demand, Danish Mekoprint is experiencing strong growth across industries and product areas. To ensure capacity and increased competitiveness, the Mekoprint division Mechanics alone, is investing more than 7 MEUR in a building expansion and additional machine capabilities and capacity.

Load more news

© 2026 Evertiq AB

Ad