Evertiq - First In Electronics News & Expo

Ad

Ad

Ad

Ad

Ad

motherboard-Germany

June 12, 2026
From AI-driven production planning and advanced PCB manufacturing to supply chain resilience and Europe's industrial competitiveness, Evertiq Expo Berlin 2026 will bring together experts from across the electronics industry to discuss some of the sector's most pressing challenges. Ahead of the event on 18 June, we take a closer look at this year's conference programme.

Malaysia_facility

June 12, 2026
The Penang facility spans 60,000 square feet and houses 12 production lines, providing a monthly production capacity of upto 300,000 units. It operates as an OEM manufacturing base for industrial electronics, environmental control and electronics power modules.

Ad

lab

June 10, 2026
Swedish PCB supplier NCAB has published a stark supply chain outlook in May 2026, describing a market under simultaneous pressure from AI demand, geopolitical disruption and raw material shortages. The company's conclusion is direct: what the industry is experiencing now is not a temporary disruption — it is a structural reset.

DGQA_MOU

June 10, 2026
The proposed agreement aims at the timely supply of electronic fuzes as per stipulated specifications and quality standards to undertake proof firing and evaluation or trials of weapons and ammunition being procured by the Indian Army.

PCB-USA_1

June 09, 2026
San Francisco-based deep tech startup Itera’s patented technology uses a novel architecture of glass and liquid metal, allowing circuit rewiring in less than a minute.

Samsung_chip_design

June 09, 2026
Through close engineering alignment, Siemens continues to qualify and deploy its electronic design automation (EDA) software — including design, verification, simulation and silicon manufacturing enablement — with Samsung Foundry’s latest process technologies.

Samueli_semiconductor_hub

June 08, 2026
The mission of the semiconductor hub is to foster sustained collaboration between leading faculty and industry partners Broadcom, Applied Materials, GlobalFoundries, Meta and Synopsys to drive advances in connectivity, computing and intelligent systems.

DRAM5-products

June 08, 2026
The DRAM industry posted revenue of USD 97 billion in the first quarter of 2026, up 81% quarter-on-quarter, driven by a rapid surge in contract prices for conventional DRAM. Contract prices rose approximately 93 to 98 percent compared to the previous quarter, according to TrendForce.

Building-boundry-Switzerland

June 04, 2026
Swiss EMS provider Cicor Group has been selected by a leading European aerospace & defence (A&D) prime to supply electronic assemblies for a major defence program.

Tessalia

June 04, 2026
Foxconn, Radiall and Thales laid the foundation stone of their future JV. Tessalia is expected to have 800 employees at full production. Production is expected to start at the end of 2029 and to reach more than 50 million SiP components per year by 2033.

AutoComp_Jahwa_Electronics

June 04, 2026
The partnership brings together Jahwa Electronics’ Korean engineering expertise and Tata AutoComp’s manufacturing ecosystem in India. The companies will manufacture low and high voltage PTC heaters critical for thermal management in electric and hybrid vehicles.

Sponsored content by Shanghai Yongming Electronic Co.,Ltd

MissingImage

YMIN VHT/VHU/VHR solid-liquid hybrid capacitors for automotive electronic water pumps solve cold-start noise and high-vibration challenges. They enable pin-to-pin replacement of Japanese brands with equivalent performance and stable supply.

Zirconn-2026

May 28, 2026
Zirconn is expanding its manufacturing capabilities in China. The company has launched a new SMT assembly division aimed at increasing its capacity to deliver advanced electronic projects for customers in Europe and international markets.

2Raymond-Goh

May 27, 2026
The global raw material supply continues to pressure the electronic industry and not least the PCB manufacturing sector. What initially affected a narrow range of high-frequency materials has now evolved into a broader scope, impacting both advanced laminates and standard FR-4 materials.

Expo-ber25-9

May 26, 2026
The German electronics industry is entering a period defined less by stability and more by adaptation. For years, the sector benefited from a model built on industrial strength, global supply chains and close ties between manufacturing and export-driven growth. Today, many of those assumptions are being re-evaluated.

May 26, 2026
US memory manufacturer Micron has begun 1-alpha DRAM manufacturing at its Manassas, Virginia facility — the most advanced memory technology ever produced in the United States, according to the company. The more than USD 2 billion investment will quadruple Micron's DDR4 wafer supply at the site.

May 25, 2026
Currently, China’s most advanced proven chipmaking capability is believed to be around 7nm, and experts say 1.4nm is likely the global limit for advanced chipmaking around the end of the decade. So the Chinese tech giant’s claims could represent a breakthrough.

Expo-Zurch-2026-Nikolaos-Florous-memphis-electronic-interview

May 25, 2026
Following his presentation at Evertiq Expo Zürich, Memphis Electronics' Nikolaos Florous had a conversation with Evertiq to go deeper on the market outlook. The short version: conditions will stay difficult, and procurement teams that haven't adapted yet are running out of time.

CCL

May 20, 2026
The South Korean company’s new subsidiary and Copper Clad Laminate (CCL) production plant will be located at Araya Industrial Park in Bang Bo, Samut Prakan, Thailand. Approximately USD 120 million is being invested in the project.

India-facility-2025

May 12, 2026
EMS provider Incap has completed a EUR 1.53 million investment in its Indian manufacturing operations, installing a new flying probe test system and upgrading the SMT line at its Tumkur factory near Bangalore.

Zurich-2026-Nick-presentation

May 08, 2026
Nikolaos Florous of Memphis Electronic delivered a data-heavy, at times bluntly honest overview of the global memory market at Evertiq Expo Zürich – and his central message was uncomfortable: the rules have changed, and most of the industry is still playing by the old ones.

Expo-KRK2026-04

May 08, 2026
Evertiq Expo Kraków 2026 brought the electronics industry back to Kraków on May 7. The industrial atmosphere of CFK13, with its distinctive 1930s character, set the stage for discussions about where the Polish and European electronics industries are heading next.

Metamind_Kristellar_MoU

May 06, 2026
Metamind is an Indian technology firm specialising in AI-driven data analytics and digital transformation solutions for sectors like aerospace, defense, healthcare, IT and ITES. Kristellar is a defence technology startup.

Sponsored content by Elemaster Group

imgcv

In complex electronic systems, accredited EMC testing is not only a compliance step. It is a structured engineering tool that improves reliability, supports design decisions and helps transform validation into a concrete driver of product robustness.

Lukasz-Ozimek

May 05, 2026
Just a year ago, during the panel “Cybersecurity in the era of integrated electronic systems” at Evertiq Expo Kraków, uncertainty dominated the discussion. Companies knew new regulations were coming, but lacked clarity – both in terms of scope and implementation. Today, that situation is beginning to shift. Regulations are coming into force, and with them, pressure is mounting – particularly in the industrial and electronics sectors – to treat cybersecurity as an operational concern, not merely a formal requirement.

Transmission_building

May 05, 2026
The acquisition aligns with Dhoot’s strategy to capitalize on accelerating trends towards increasing electrification, premiumization and electronic content in vehicles, supported by rising EV adoption.

Ewelina-Bednarz-3_KRK-2025

May 04, 2026
What happens at the design stage is increasingly resolved later – in production and on the market. Decisions related to system architecture, material selection or operating parameters often return in the form of integration challenges, manufacturing constraints or supply chain risks. In electronics for demanding applications, these dependencies are particularly visible. Design, system performance and market conditions form a connected system in which changes in one area affect the others.

Rheinmetall

May 04, 2026
Boeing’s MQ-28 Ghost Bat, a proven autonomous collaborative combat aircraft (CCA), has completed more than 150 flights and has been designed, developed and manufactured in Australia for the Royal Australian Air Force and other allied nations.

Toubro_logo

May 01, 2026
The new business vertical, L&T Electronic Products & Systems (LTEPS), will be headquartered in Bengaluru, while the manufacturing operations will be based in Coimbatore. To begin with, two manufacturing lines have been commissioned.

zrh2027-003

April 29, 2026
Evertiq Expo made its debut in Zürich on April 23, bringing together the Swiss electronics industry for a day of networking, insights, and focused discussions.

Zurich-2026-Group-2

April 27, 2026
Evertiq Expo made its debut in Zurich on April 23, introducing its table-top format to the Swiss electronics industry.

Sponsored content by Shanghai Yongming Electronic Co.,Ltd

mainimageforcom

YMIN's SLR hybrid supercapacitors enable reliable energy storage at -40°C, with stable capacitance, low ESR, and long service life. Ideal for IoT, smart meters, and outdoor use in extreme climates.

Load more news

© 2026 Evertiq AB

Ad