Electronics Production | December 20, 2007
STMicro and TJ FAW Xiali<br>Automobile in cooperation
STMicroelectronics and TIANJIN FAW Xiali Automobile, a China-based automotive manufacturer, has inaugurated the Joint Automotive Application Laboratory in Tianjin, China.
Both parties will cooperate in a joint effort to research and develop advanced automotive application solutions for TJ FAW and its vendors in the areas of power train, electric module, development Calibration, power-train control by new energy sources and in-vehicle infotainment. As China’s first application laboratory sponsored jointly by a major car manufacturer and a semiconductor supplier, the TJ FAW-ST Automotive Application Lab will focus on Engine Simulation and Engine Management System (EMS) design in EMS systems, Transmission Control Unit (TCU) system simulation, TCU design in the power train, power-train control by new energy sources and in-vehicle infotainment. The first proven application solution is scheduled to be completed in two to three years, which will enable TJ FAW to integrate the solution into their future car models, offering reduced costs and a higher ratio of localized modules for manufacturers, thereby driving the development of sustainable innovation in local low- to mid-range car markets.
New electric vehicle battery cell facility in Lordstown Construction has started with ground prep activities for the future site of the Ultium battery cell manufacturing facility in Lordstown.
Morrow Batteries to build the first giga battery cell factory in Norway Morrow Batteries says it will build battery cell production in Norway in order to meet increasing market demand and lead the drive for more sustainable batteries.
Groupe PSA and Punch Powertrain team up on electrification Groupe PSA and Punch Powertrain have signed an agreement to establish a second Joint Venture and expand their strategic partnership in the field of electrification, to contribute to fight against climate change.
Aspocomp starts phase two of its plant investment in Oulu Finnish PCB manufacturer company Aspocomp, has been granted a total of EUR 1.35 million in development support by the ELY Center for the implementation of the second phase of its Oulu plant investment.
Global semiconductor sales down 1.2 percent in April 2020 Global semiconductor sales in April 2020 were USD 34.434 billion, up 6.1% versus the same month in 2019, says the European Semiconductor Industry Association (ESIA).
Cobham RAD sold to Radiation Test Solutions Cobham Advanced Electronic Solutions says that it has sold its Cobham RAD radiation testing business in Colorado Springs, to Radiation Test Solutions, Inc. (RTS).
Construction starts at Kyungshin new factory in Serbia The South Korean automotive company has initiated the construction of its new facility in the municipality of Smederevska Palanka in Serbia – once completed 700 new jobs will be created.
Manz is expanding within its contract manufacturing segment The German engineering company says it is registering lively interest in contract manufacturing from a wide range of industries. Manz is thus further expanding its business in the contract manufacturing segment at its locations in Slovakia and China.
Celestica to manufacture ventilators for the Canadian market EMS provider Celestica has won a program to build 7,500 ventilators for StarFish Medical Inc., a Canadian medical device company, at Celestica’s operation in Newmarket, Ontario.
Ouman Estonia starts an expansion project Despite the current uncertain economical environment, Ouman says it believes in a brighter future and that the company is proud of the performance in its factories.
Reshaping production post COVID-19 As manufacturers re-open after COVID-19 related lockdowns, economic and supply chain disruptions may be felt beyond 2020. How companies shift in the short-term and plan for the long-term will be factors in defining “new normal” for the component industry.
Swedish EG Electronics acquires WEAB EG Electronics AB, a KAMIC Group company, has acquired all the shares in WEAB, Wermlands Elektronik AB.
ZF completes its acquisition of WABCO ZF Friedrichshafen AG has successfully completed the acquisition of commercial vehicle technology supplier WABCO, having gained approval from all required regulatory authorities.
Romanian EMS provider expands as it relocates Romanian EMS-Electra has successfully finalised the process of relocating to a new building, in the industrial area of Iasi, Romania.
Circuit Check partners with major healthcare company to build ventilators In early March, when a long-standing customer to the company, a major healthcare company approached Circuit Check to partner together to build over a dozen tests systems to assist in the COVID-19 efforts, Circuit Check responded quickly to the challenge.
TI maintains firm grip as world's top analog IC supplier TI's 2019 analog marketshare grew to 19% and ST climbed to fourth place as the top-10 suppliers collectively accounted for 62% of total analog sales.
Big Ass Fans adds third Hentec/RPS machine Complementing the purchase of two Hentec Industries/RPS Automation Vector 300 selective soldering machines in 2018, Big Ass Fans (BAF), a high-volume, low- speed (HVLS) airflow manufacturer, has just added a third machine to its factory in Newman Lake, Washington.
CE3 Electronics Inc. taps MIRTEC for 3D AOI technology Canada-based CE3 Electronics has purchased a MIRTEC MV-6 OMNI 3D AOI machine.
Gémosz is still looking to grow – but the pandemic brought new perspectives Winston Churchill famously said, “Never let a good crisis go to waste”. While this was said in a vastly different context than the current crisis of the COVID-19 pandemic, there is still truth to the fact that a crisis not only allows for change – but sometimes forces it.
North American PCB industry sales up 4.3% in April The IPC says that total North American PCB shipments in April 2020 were up 4.3% compared to the same month last year. Compared to the preceding month, April shipments fell 18.2%.
Volkswagen intensifies e-mobility activities in China Volkswagen has initiated the next chapter for its business in China. The automotive giant plans to increase its share in JAC Volkswagen, its joint venture for e-mobility.
GPV Selects Aegis as global smart factory partner Driven originally by accelerating customer expectations for traceability, GPV has selected Aegis’ FactoryLogix Smart digital manufacturing solution, targeting multiple values and benefits.
REDCOM EMS expands certification for medical device manufacturing New York-based REDCOM EMS has secured ISO 13485:2016 certification, complementing the company’s existing ISO 9001:2015 and AS9100D certifications.Load more news