Ad
Ad
Ad
Ad
Electronics Production | March 27, 2006

No risk for joint degradation<br>when mixing SAC, SN100C

According to an article at Circuitsassembly.com there is no risk of joint degradation when mixing SAC and SN100C in soldering processes.
Based on results from this testing, no degradation of the solder joint was found due to mixing SN100C with SAC alloy. Therefore, a two-alloy system may be successfully used for mixed technology boards without compromising reliability.

Click here to read more about this at Circuitsassembly.com

Comments

Please note the following: Critical comments are allowed and even encouraged. Discussions are welcome. Verbal abuse, insults and racist / homophobic remarks are not. Such comments will be removed.
Further details can be found here.
Ad
Ad
Load more news
July 18 2018 5:55 pm V10.0.0-1