Strong earthquake hits northeastern Japan
A powerful magnitude 7.3 earthquake occurred off the coast of Fukushima, Japan on the evening of March 16. Most of northeastern Japan is a production center for global upstream semiconductor raw materials.
According to TrendForce investigations, in the main quake zone, only Kioxia’s K1 Fab (located in Kitakami) will face the possibility of a further downgrade to 1Q22 production. Some of the remaining memory or semiconductor companies in the region are conducting machine inspections but the overall impact has been muted.
In terms of memory, the intensity of the earthquake at Kioxia’s K1 Fab reached magnitude 5. When the earthquake occurred, wafer input was partially damaged. At present, K1 Fab has been shut down for inspection. The 1Q22 production capacity of the K1 Fab had been downgraded following the recent contamination incident and accounts for approximately 8% of Kioxia's 2022 production capacity. Operating under a cloud of possible aftershocks, Kioxia's capacity utilization rate may be slow to recover in the next week, causing further downward revision of K1 Fab’s 1Q22 production. The remaining Kioxia factories are unaffected, as is Micron's Hiroshima plant.
Looking at the market spot price, pricing has moved up since February due to the contamination of Kioxia’s raw materials. The Russian-Ukrainian war did not trigger significant upward or downward movements in spot price. After last night’s Fukushima earthquake, pricing remains stable. TrendForce asserts, overall spot demand remains weak and prices are not prone to drastic changes.
In terms of raw wafers, SUMCO's Yonezawa Plant in Yamagata and Shin-Etsu's Shirakawa Plant in Fukushima are both within the affected area, experiencing an earthquake intensity of magnitude 5. Due to the extremely high stability required in the crystal growth process, the industry has not yet announced the impact of the quake. TrendForce specifies, in addition to shutdown inspections, damage to machines and silicon wafer input is inevitable. However, in addition to redistributing production plans, buildings were reinforced after the 2011 Tohoku earthquake and tsunami in Japan, so overall damage may be minor.
In terms of foundries, there are two 12-inch wafer fabs and two 8-inch wafer fabs in Japan, including UMC Fab12M (12-inch), Tower Uozu (12-inch), Tonami (8-inch), Arai (8 inches), located in Mie, Toyama, and Niigata prefectures, respectively, and separately experiencing quake magnitudes from 1 to 3. At present, these fabs are operating normally and any impact of the quake on the plants are largely insignificant. However, IDM manufacturer Renesas’ Naka plant is within the magnitude 5 zone and they have also shut down and reduced production to confirm the impact of the quake.
For more information visit TrendForce.
