© Rehm Electronics Production | April 09, 2019
Rehm hands over 5000th reflow soldering system
In mid-March, Rehm Thermal Systems handed over their 5000th reflow soldering system, the receiver of the convection soldering system VisionXP+ was Endress+Hauser Flowtec AG in Reinach, Switzerland.
Endress+Hauser Flowtec AG is a supplier of flow measurement technology used in all areas of industrial process engineering. Rehm Thermal Systems and Endress+Hauser have enjoyed a successful partnership reaching back over more than 20 years. A partnership which has seen numerous joint projects. Endress+Hauser Flowtec AG has been developing and manufacturing industrial flowmeters for liquids, gases and steam for over 40 years. For many years now, these flowmeters have been produced using systems, supplied among others, by Rehm. Rehm Thermal Systems has already supplied the Swiss company with four ProtectoXP coating systems, two RDS 3000 drying systems, as well as four VisionXP+ convection soldering systems. A fifth VisionXP+ has now been added. And the constant line expansion at Endress+Hauser Flowtec indicates a course of continual growth. As with all systems in the VisionX series, this VisionXP+ is equipped with two tried and tested residue management systems: pyrolysis in the preheating zone, as well as cold condensation and filtering in the cooling tract. This ensures that all residue, whether in gas, liquid, crystalline or particulate form, is removed from the process gas in an energy saving and efficient way. The VisionXP+ systems from Rehm Thermal Systems in use at Endress+Hauser are also equipped with an extended 1.5 metre cooling tract (Power Cooling Unit), which allows for gentle and controlled cooling of the highly complex components.
Co-operation negotiations completed at Etteplan Etteplan initiated co-operation negotiations on March 18th 2020 due to temporary changes in customer demand caused by the COVID-19 pandemic. Now, the negotiations have come to a complete.
Indian electronics company support the fight against COVID-19 Indian engineering and technology solutions company, Cyient, says it’s received clearance for its Mysore facility to run its MedTech manufacturing lines to support the production of medical equipment critical in the fight against COVID-19
Tesvolt kickstarts production at new German factory Semi-automated production began today in Europe’s first gigafactory for commercial battery storage systems, located in Wittenberg, Germany.
Global semiconductor materials market revenues slip 1.1% in 2019 Global semiconductor materials market revenues edged down 1.1% in 2019, SEMI reported in its Materials Market Data Subscription (MMDS).
Cirexx Int’l posts COVID-19 update Santa Clara, California-headquartered Cirexx International has released a statement penned by President and CEO Philipp Menges concerning status of operations during the coronavirus pandemic.
Abbott gets OK for fast, portable COVID-19 test Abbott has been granted emergency use authorization (EUA) from the U.S. Food and Drug Administration (FDA) for a rapid molecular point-of-care test for the detection of novel coronavirus (COVID-19).
COVID-19 limits viability for AT&S Considering current events and the effects that the global pandemic is having on logistics and production chains worldwide, AT&S is preparing itself for a decline in demand in some of its customer segments.
Neways provides update on COVID-19 impact The EMS provider says it has taken various measures to limit the risks to the health of its employees, as well as its clients and suppliers. In addition, the company has taken measures to safeguard business continuity.
Samsung Display plans to stop all LCD production in 2020 The South Korean company has reached the decision to end all of its production of LCD panels in its home country and in China by the end of 2020.
Orbit One updates machine park with new selective soldering machine Swedish EMS provider, Orbit One, has invested in a new ERSA selective soldering machine for the production unit in Ronneby, Sweden.
ZOLL pivots to focus on volume for ventilator production Massachusetts-based ZOLL Medical Corporation has shot capacity up to 10,000 ventilators per month in response to the COVID-19 pandemic, representing a nearly 25-fold increase from normal volume production.
Computrol ramps output for ventilator production As the coronavirus pandemic continues its spread through the U.S., Idaho-based Computrol is joining a growing list of electronics manufacturers who are adjusting operations to support companies producing critical healthcare products.
ABB adding jobs, new distribution center in Arizona ABB has announced the creation of a new distribution center in Phoenix, in a move that will bring the company closer to Western U.S. distributors, contractors, industrial customers, and retailers.
8% growth in 2019 drives tenth consecutive year of EDA growth The Electronic System Design (ESD) Alliance Market Statistics Service (MSS) says that the Electronic Design Automation (EDA) industry revenue increased 2.2% for Q4 2019 to USD 2626.3 million, compared to USD 2570.1 million in Q4 2018.
Polestar 2 production begins in Luqiao, China Production of Polestar 2 has officially begun in Luqiao, China. The new electric performance fastback is the first electric vehicle to be produced by the facility.
Kimball Electronics updates on the impact of COVID-19 COVID-19 has disrupted the company’s global operations since its initial outbreak. While Kimball Electronics' facilities in China were initially adversely impacted, they have now resumed normal operations.
First Solar says that it's still operational First Solar says that its manufacturing operations will continue at each of the company’s Wood County, Ohio, Kulim, Malaysia and Ho Chi Minh City, Vietnam facilities at this time
100 IC wafer fabs closed or repurposed since 2009 The hardest hit are ≤200mm wafer fabs, 70% of the closures are found in Japan and North America.
Westermo signs contract with North American rail company Beijer Electronics Group has through its business entity Westermo signed a contract with a large North American rail company with an estimated value during the contract period of SEK 80 million (EUR 7.24 million).
Royal Flex Circuits boosts effort to support healthcare Santa Fe Springs, California-based Royal Flex Circuits is ramping up capacity at its year-old manufacturing facility to be produce more of the printed circuits needed in the production of ventilators used specifically in the treatment of Coronavirus.
Lam Research reacts to COVID-19 situation Fremont, California-based Lam Research Corporation has issued a business update for its quarter ending March 31, 2020.
Panasonic,Tesla scaling down production in Nevada In response to Panasonic’s announcement this week of a temporary, full suspension of production of its operations at Tesla’s Gigafactory in Nevada, Tesla also issued a statement that it would significantly decrease production at the site.
NOTE temporarily suspends production at Windsor plant Swedish EMS provider NOTE has, in line with the UK authorities' decision to limit all non-essential travel and work, temporarily halted its production at its manufacturing facility in Windsor.
Texas Instruments adjusting operations in Texas Texas Instruments is following a Dallas County shelter-in-place order and reducing operations at the company’s Dallas-area plants.Load more news