© mirusiek dreamstime.com Analysis | May 21, 2013
How Intel can enable a successful USD 200 PC
Can PC makers produce ultrathin, touch-screen PCs that are appealing to consumers—and that are priced at just $200?
The astounding answer seems yes—if microprocessor Intel Corp. is willing to cut the price of its semiconductor components to PC makers, according to IHS. Speaking at the IHS/SID 2013 Business Conference, held May 20 in Vancouver, Canada, Zane Ball, Intel vice president and general manager, Global Ecosystem Development, is presenting his company’s plan to empower the PC industry to produce low-cost notebooks incorporating touch technology. Craig Stice, senior principal analyst for compute platforms at IHS, believes Intel has a shot at success. “A price point that low seems far-fetched considering the mobile PC prices of today, with Ultrabooks and other ultrathins going as high as $1,000 or more,” Stice said. “However, the small laptops known as netbooks saw their prices reach down into the $200 range at the height of their popularity a few years ago, and a cost analysis of netbooks shows how such a low level of pricing can be used to support a no-frills type of ultrathin PC.” The cost estimate for a standard netbook, based on the IHS Compute Systems Cost Analyzer that calculates the major components of a netbook on a third-quarter 2013 timeline, comes out to $207.82. “Hitting this kind of price point is not impossible for the PC industry, already a cutthroat market accustomed to razor-thin margins,” Stice said. “Such a possibility was stated by outgoing Intel CEO Paul Otellini, who during Intel’s first-quarter earnings call in April made the bold prediction that touch-enabled, ultrathin Intel-based notebooks using non-core processors could be available by the end of this year.” Intel holds the cards The key factor that could make this happen is Intel, which can control up to 33 percent of the total bill-of-materials cost for the PC through the central processing unit (CPU) and motherboard. If Intel decides to provide a price break for just these components, PC original equipment manufacturers could see their margins improve, allowing them to drive down prices for the retail market. With PC competition so fierce, it takes only one PC manufacturer to find a price point that sells—and others are bound to follow suit shortly afterward. Intel could also be instrumental in introducing an even more powerful ultrathin-type mobile PC than netbooks, which have now been overtaken by media tablets and are on their way out of the market altogether. Intel’s next-generation Atom processor, called Bay Trail, has the potential to deliver a performance boost that will clearly separate the traditional netbooks of old from the new generation of mobile and ultrathin PCs. Avoiding netbooks’ fate While netbooks had limited computing power and were regarded more as devices for content consumption, the new and much more economical ultathins, in contrast, would possess considerably more power and be categorized as content-creation devices. Such a perceptible enhancement could increase their chances of survival in the marketplace, unlike the short-lived netbooks. Much depends on Bay Trail, which Intel says will move from two processing cores to four to provide beefed-up performance. Along with Bay Trail, Intel’s own high-definition embedded graphics and an extended battery life for improved power will yield a processor bearing similar performance to the chipmaker’s renowned family of Core processors. All these traits could be part of the new, less expensive ultrathin being projected. What PC manufacturers also must do What these developments portend for the PC industry is significant. If the PC industry is able to get down to the $200 price point, and Intel’s Bay Trail processor delivers what it claims to do, then the PC market will have its much-needed shot in the arm. Such a turn of events could then spark the mobile PC market, which has been losing steam to flashier rivals like smartphones and tablets. Besides Intel’s willingness to cut its own price point to make chips available at a lower cost to customers, a second important factor involves the PC makers themselves. For their part, PC manufacturers also need to find a way of getting to the magic price point of $200—and possibly sacrifice even more margin in exchange for the greater amount of volume that they seek. All told, the scenario above—merely hypothetical at this point—is not entirely out of reach. A strong second half is already being forecast for PCs this year: add in the potential for lower-priced next-generation ultrathin systems, and the PC industry may finally have a valid competitor to lower-priced media tablets.
Celestica to manufacture ventilators for the Canadian market EMS provider Celestica has won a program to build 7,500 ventilators for StarFish Medical Inc., a Canadian medical device company, at Celestica’s operation in Newmarket, Ontario.
Ouman Estonia starts an expansion project Despite the current uncertain economical environment, Ouman says it believes in a brighter future and that the company is proud of the performance in its factories.
Reshaping production post COVID-19 As manufacturers re-open after COVID-19 related lockdowns, economic and supply chain disruptions may be felt beyond 2020. How companies shift in the short-term and plan for the long-term will be factors in defining “new normal” for the component industry.
Swedish EG Electronics acquires WEAB EG Electronics AB, a KAMIC Group company, has acquired all the shares in WEAB, Wermlands Elektronik AB.
ZF completes its acquisition of WABCO ZF Friedrichshafen AG has successfully completed the acquisition of commercial vehicle technology supplier WABCO, having gained approval from all required regulatory authorities.
Romanian EMS provider expands as it relocates Romanian EMS-Electra has successfully finalised the process of relocating to a new building, in the industrial area of Iasi, Romania.
Circuit Check partners with major healthcare company to build ventilators In early March, when a long-standing customer to the company, a major healthcare company approached Circuit Check to partner together to build over a dozen tests systems to assist in the COVID-19 efforts, Circuit Check responded quickly to the challenge.
TI maintains firm grip as world's top analog IC supplier TI's 2019 analog marketshare grew to 19% and ST climbed to fourth place as the top-10 suppliers collectively accounted for 62% of total analog sales.
Big Ass Fans adds third Hentec/RPS machine Complementing the purchase of two Hentec Industries/RPS Automation Vector 300 selective soldering machines in 2018, Big Ass Fans (BAF), a high-volume, low- speed (HVLS) airflow manufacturer, has just added a third machine to its factory in Newman Lake, Washington.
CE3 Electronics Inc. taps MIRTEC for 3D AOI technology Canada-based CE3 Electronics has purchased a MIRTEC MV-6 OMNI 3D AOI machine.
Gémosz is still looking to grow – but the pandemic brought new perspectives Winston Churchill famously said, “Never let a good crisis go to waste”. While this was said in a vastly different context than the current crisis of the COVID-19 pandemic, there is still truth to the fact that a crisis not only allows for change – but sometimes forces it.
North American PCB industry sales up 4.3% in April The IPC says that total North American PCB shipments in April 2020 were up 4.3% compared to the same month last year. Compared to the preceding month, April shipments fell 18.2%.
Volkswagen intensifies e-mobility activities in China Volkswagen has initiated the next chapter for its business in China. The automotive giant plans to increase its share in JAC Volkswagen, its joint venture for e-mobility.
GPV Selects Aegis as global smart factory partner Driven originally by accelerating customer expectations for traceability, GPV has selected Aegis’ FactoryLogix Smart digital manufacturing solution, targeting multiple values and benefits.
REDCOM EMS expands certification for medical device manufacturing New York-based REDCOM EMS has secured ISO 13485:2016 certification, complementing the company’s existing ISO 9001:2015 and AS9100D certifications.
Ozark Integrated Circuits nabs U.S. Air Force grant Arkansas-based Ozark Integrated Circuits Inc., located in the Arkansas Research and Technology Park at the University of Arkansas, has received a USD 750,000 award from the U.S. Air Force.
Norwegian EMS adds employees to Polish unit The last couple of months Norautron has welcomed three new colleagues at its office in Sdunska Wola, Poland.
Daimler’s battery production in Kamenz gradually increases production Local battery production is described as an important success factor for Mercedes-Benz AG’s electric offensive and a key element to flexibly and efficiently meet the global demand for electrified vehicles.
Tepcomp invests in new additional production line Finnish EMS provider, Tepcomp Group, has made a significant investment at its production plant in Turku. The new surface mount technology production line will significantly improve the productivity and energy efficiency of the plant.
Valoe is on schedule with both production and expected deliveries Valoe says it will start manufacturing IBC test modules in Juva, Finland in June and cell deliveries from Lithuania to customers is scheduled to start according to plan.
AMTE Power and Britishvolt sign MoU for GigaFactory AMTE Power and Britishvolt plans to investigate collaborating to build the UK’s first full cycle battery cell GigaPlant, servicing the automotive and energy storage markets.
ALLPCB’s new SMT factory has launched production On May 10 2020, ALLPCB’s new – self-operated – SMT factory in Guangde, Anhui Province, China was officially put into production.
Schweizer starts production at its new location in China Following a construction period of one and a half years, production has now started at the company’s new high-tech printed circuit board plant in Jiangsu, China.
Jenoptik supplies generators to a US customer Through its Vincorion investment, Jenoptik received a long-term order for generators that an unnamed US customer is integrating into military vehicles.Load more news
- China falls far short of its "Made-in-China 2025" goal
- Raspberry Pi audio HAT board with MERUS class D multilevel amplifier
- ASML ships first-generation multibeam inspection system ‘eScan1000’
- Romanian EMS provider expands as it relocates
- Gémosz is still looking to grow – but the pandemic brought new perspectives