© baloncici dreamstime.com Electronics Production | November 28, 2012
University of Pennsylvania claim flexible electronics breakthrough
Researchers from the University of Pennsylvania have shown that nanocrystals, of the semiconductor cadmium selenide can be "printed" on flexible plastics.
Electronic circuits are typically integrated in rigid silicon wafers, but flexibility opens up a wide range of applications. In a world where electronics are becoming more pervasive, flexibility is a highly desirable trait, but finding materials with the right mix of performance and manufacturing cost remains a challenge. Now a team of researchers from the University of Pennsylvania has shown that nanoscale particles, or nanocrystals, of the semiconductor cadmium selenide can be "printed" or "coated" on flexible plastics to form high-performance electronics. The research was led by David Kim, a doctoral student in the Department of Materials Science and Engineering in Penn’s School of Engineering and Applied Science; Yuming Lai, a doctoral student in the Engineering School’s Department of Electrical and Systems Engineering; and professor Cherie Kagan, who has appointments in both departments as well as in the School of Arts and Sciences’ Department of Chemistry. Benjamin Diroll, a doctoral student in chemistry, and Penn Integrates Knowledge Professor Christopher Murray of Materials Science and of Chemistry also collaborated on the research. Their work was published in the journal Nature Communications. “We have a performance benchmark in amorphous silicon, which is the material that runs the display in your laptop, among other devices,” Kagan said. “Here, we show that these cadmium selenide nanocrystal devices can move electrons 22 times faster than in amorphous silicon." Besides speed, another advantage cadmium selenide nanocrystals have over amorphous silicon is the temperature at which they are deposited. Whereas amorphous silicon uses a process that operates at several hundred degrees, cadmium selenide nanocrystals can be deposited at room temperature and annealed at mild temperatures, opening up the possibility of using more flexible plastic foundations. Another innovation that allowed the researchers to use flexible plastic was their choice of ligands, the chemical chains that extend from the nanocrystals’ surfaces and helps facilitate conductivity as they are packed together into a film. “There have been a lot of electron transport studies on cadmium selenide, but until recently we haven’t been able to get good performance out of them,” Kim said. “The new aspect of our research was that we used ligands that we can translate very easily onto the flexible plastic; other ligands are so caustic that the plastic actually melts.” Because the nanocrystals are dispersed in an ink-like liquid, multiple types of deposition techniques can be used to make circuits. In their study, the researchers used spincoating, where centrifugal force pulls a thin layer of the solution over a surface, but the nanocrystals could be applied through dipping, spraying or ink-jet printing as well. On a flexible plastic sheet a bottom layer of electrodes was patterned using a shadow mask — essentially a stencil — to mark off one level of the circuit. The researchers then used the stencil to define small regions of conducting gold to make the electrical connections to upper levels that would form the circuit. An insulating aluminum oxide layer was introduced and a 30-nanometer layer of nanocrystals was coated from solution. Finally, electrodes on the top level were deposited through shadow masks to ultimately form the circuits. “The more complex circuits are like buildings with multiple floors,” Kagan said. “The gold acts like staircases that the electrons can use to travel between those floors.” Using this process, the researchers built three kinds of circuits to test the nanocrystals performance for circuit applications: an inverter, an amplifier and a ring oscillator. “An inverter is the fundamental building block for more complex circuits,” Lai said. “We can also show amplifiers, which amplify the signal amplitude in analog circuits, and ring oscillators, where ‘on’ and ‘off’ signals are properly propagating over multiple stages in digital circuits.” “And all of these circuits operate with a couple of volts,” Kagan said. “If you want electronics for portable devices that are going to work with batteries, they have to operate at low voltage or they won’t be useful.” With the combination of flexibility, relatively simple fabrication processes and low power requirements, these cadmium selenide nanocrystal circuits could pave the way for new kinds of devices and pervasive sensors, which could have biomedical or security applications. “This research also opens up the possibility of using other kinds of nanocrystals, as we’ve shown the materials aspect is not a limitation any more,” Kim said. To read the article on University of Pennsylvania's site click here
Schmid relocates its main Chinese production plant The groups main Chinese factory will move out of the free trade zone in Zhuhai to newly built factory in Zhongshan, some 40 kilometer away from the old location.
The sale of Scanfil’s Hangzhou unit is completed On 29 June 2020, Scanfil announced that it would sell the entire share capital of its subsidiary Scanfil (Hangzhou) Co., Ltd. located in Hangzhou, China.
Kitron reports record performance during the pandemic EMS provider Kitron reports strong growth and record profit for the second quarter driven by Defense/Aerospace, Medical devices and Industry sectors.
Presto Engineering expands with facility move The provider solutions provider is moving to a new facility in Caen, France, which will enhance the company’s engineering and production capabilities.
Sponsored content by ASMASM Impact – Release Summer 2020: SMT technology leader presents new products in compact livestream ASM’s new releases for this summer are innovative, smart, and deliver great gains in productivity. ASM will present these new solutions, the premiere of the ASM Works software suite and many more innovations around the integrated smart factory in a compact livestream with expert chats and spin-off sessions.
Meyer Burger to set up solar production in Germany’s solar valley Meyer Burger wants to establish its own production of solar cells and solar modules in Saxony-Anhalt and Saxony.
Jaroslav Neuhauser new General Manager for Saki Europe Saki Corporation, a specialist in the field of automated optical and X-ray inspection equipment, announces the promotion of Jaroslav Neuhauser to General Manager of Saki Europe GmbH (Saki EU).
Polytronics will acquire TCLAD, the thermal management business of Henkel Polytronics Technology Corporation plans to, through its subsidiary, acquire the entire assets and business of Insulated Metal Substrates panels and circuits of Henkel's TCLAD division (including the plant and facilities of approximately 100,000 square feet located in Prescott Wisconsin the employment contracts of around 273 employees), but excluding debts.
AT&S starts partnership with design company IMST GmbH With the aim of jointly developing high-frequency technology solutions, AT&S has concluded a strategic cooperation agreement with IMST GmbH in Kamp-Lintfort, Germany.
Sponsored content by Pegasus Components GmbHThe open market for electronic components as an opportunity in the current crisis. The past few months have also led to bottlenecks in the market for electronic components. The open market offers an attractive solution. Independent distributors like Pegasus Components react quickly and flexibly. Through procurement and stock items they offer a reliable as well sustainable alternative.
Heidenhain opens new expanded Western US HQ This includes the expansion of its executive, sales and technical support offices, as well as demo facilities in San Jose, California.
Delphi Technologies awarded new power electronics business Delphi Technologies is making new strides by securing new power electronics business wins in the second quarter of 2020 with three Chinese OEMs. The new business is scheduled to launch in the 2021-23 timeframe.
Mycronic combines US operations in new facility near Boston Mycronic US says that all of its operations have been integrated into a new 102,000 square-foot facility in Tewksbury, near Boston, Massachusetts.
Lynn Electronics acquires West Coast cable assembly company Pennsylvania-based Lynn Electronics, a manufacturer of fibre optic and copper cable assemblies, has completed its acquisition of Coast 2 Coast, LLC (C2C), an Anaheim, California cable assembly manufacturer.
Sponsored content by Nordson ASYMTEKConformal Coating Results — When You Need Better Than Just "Good Enough" Conformal coating contributes to product quality and reliability, but it is typically viewed as a process that tolerates sufficient results, or "good enough." That view is changing as more advanced and diverse electronic products enter the consumer marketplace, from the Internet of Things to self-driving vehicles.
Fictiv and Jabil team up for agile 3D printing collaboration The collaboration aims to accelerate and de-risks product development in the move from prototyping and low volume production to large scale global fulfilment.
TT expands with new industrial electronics manufacturing facility The UK-based electronics manufacturing specialist is expanding the footprint of its Global Manufacturing Solutions division by opening operations in Kuantan, Malaysia.
GE Appliances invests $62 million at its Louisville facility The manufacturer is gearing up to build high-end refrigerators and expand capacity at its manufacturing facility in Louisville, Kentucky., creating 260 new jobs.
Eaton buys new facility – merges busway operations from multiple sites Power management company Eaton has purchased a new facility in Hodges, South Carolina, establishing a new home for Eaton’s busway product line currently spanning three facilities across Greenwood County.
AIM adds new facility in Brazil AIM Solder has opened a new wholly-owned facility in Manaus, Brazil. This new stocking facility, which represents the only legitimate source of AIM products in Brazil, enables the company to support a growing Brazilian market.
PFOA now in REACh and POP regulation On 4 July, PFOA - perfluorooctanoic acid, its salts and precursor compounds - was included in the POP (Persistent Organic Pollutants) Regulation (EU) 2019/1021 and at the same time also came into force in the REACh Regulation (Annex XVII, entry 68).
Manz AG receives further Battery order Manz AG is expanding its successful partnership with an international battery manufacturers in the Energy Storage segment with a further major order in the mid double-digit million euro range.
Advantech and Interlatin to set up JV in Mexico Industrial IoT specialist, Advantech, says it is establishing a joint venture subsidiary in Mexico with its channel partner Interlatin.
Mercedes-Benz takes equity stake in Farasis Mercedes-Benz is taking another important step on its journey towards CO₂--neutral mobility. The Stuttgart-based car manufacturer has launched a strategic partnership with Chinese battery cell manufacturer Farasis Energy (Ganzhou) Co., Ltd., including taking an equity stake.
A new EMS provider sees the light of day EMS providers DataED and Bestronics merge to launch a new player – Emerald EMS.
Tektronix joins the fight agains COVID-19 Tektronix has shifted its focus from supporting vehicle manufacturing to assisting with ventilator production.
ABB completes divestment of Power Grids to Hitachi ABB has reached a significant milestone in the company’s transformation towards a decentralized global technology company, with the completion of the divestment of 80.1% of its Power Grids business to Hitachi.Load more news
- U.S.: Cancellation of Preferential Treatment for Hong Kong to impact chip industry
- Arm to strengthen focus on core semiconductor IP business growth
- ALLOS Semiconductors has sold its high power electronics and RF business
- Delphi Technologies awarded new power electronics business
- Fictiv and Jabil team up for agile 3D printing collaboration