© gingergirl dreamstime.com Electronics Production | November 07, 2012
Orbotech with increase net loss in 3Q
Revenues for the third quarter of 2012 (ended September 30, 2012.) totaled $98.9 million, compared to $101.3 million in the second quarter of 2012 and $144.4 million recorded in the third quarter of 2011.
GAAP net loss for the third quarter of 2012 was $45.7 million, or $1.05 per share, compared to GAAP net loss of $0.8 million, or $0.02 per share in the second quarter of 2012 and GAAP net income of $14.7 million, or $0.34 per share (diluted), in the third quarter of 2011. Revenues for the first nine months of 2012 totaled $300.4 million, compared to $432.0 million recorded in the first nine months of 2011. GAAP net loss for the first nine months of 2012 was $44.8 million, or $1.03 per share, compared to GAAP net income of $44.8 million, or $1.13 per share (diluted), in the first nine months of 2011. As previously announced, the Company is adopting certain measures designed to realign its infrastructure with current revenue levels and business conditions. These include a reduction in the Company’s worldwide workforce in the fourth quarter of 2012, consolidation of certain Company facilities and other cost-cutting measures. As previously reported, the Company’s Korean subsidiary and six local employees have been indicted in Korea, and the investigation into the actions of employees of the Company and its subsidiaries outside Korea is ongoing. On October 26, 2012, the Korean court released on bail the three Korean employees who had previously been arrested. These legal proceedings are ongoing and the Company’s Korean subsidiary continues to co-operate with the Korean authorities in this matter. Commenting on the quarter, Rani Cohen, President and Chief Executive Officer, said: "The lower than expected revenue levels recorded for the third, and anticipated for the fourth, quarters of 2012 reflect the challenging business environment and associated high degree of uncertainty currently prevailing in our industries and throughout the global economy." "These factors have impacted commercial and consumer spending, causing a number of PCB manufacturers to defer capital expenditure decisions. At the same time, while FPD manufacturers are beginning to experience higher utilization rates, which we believe will in the future translate into new orders for the Company, they remain very cautious at this time about placing new orders." "We expect this overall business environment to continue through the first half of 2013, and are therefore taking action to realign our worldwide organization and workforce, while still investing in key product development capabilities. This will enhance our ability to maintain - and even improve - our leadership position within the industries that we serve and will allow us to capitalize on opportunities arising once business conditions begin to improve."
Mycronic combines US operations in new facility near Boston Mycronic US says that all of its operations have been integrated into a new 102,000 square-foot facility in Tewksbury, near Boston, Massachusetts.
Lynn Electronics acquires West Coast cable assembly company Pennsylvania-based Lynn Electronics, a manufacturer of fibre optic and copper cable assemblies, has completed its acquisition of Coast 2 Coast, LLC (C2C), an Anaheim, California cable assembly manufacturer.
Fictiv and Jabil team up for agile 3D printing collaboration The collaboration aims to accelerate and de-risks product development in the move from prototyping and low volume production to large scale global fulfilment.
TT expands with new industrial electronics manufacturing facility The UK-based electronics manufacturing specialist is expanding the footprint of its Global Manufacturing Solutions division by opening operations in Kuantan, Malaysia.
GE Appliances invests $62 million at its Louisville facility The manufacturer is gearing up to build high-end refrigerators and expand capacity at its manufacturing facility in Louisville, Kentucky., creating 260 new jobs.
Eaton buys new facility – merges busway operations from multiple sites Power management company Eaton has purchased a new facility in Hodges, South Carolina, establishing a new home for Eaton’s busway product line currently spanning three facilities across Greenwood County.
AIM adds new facility in Brazil AIM Solder has opened a new wholly-owned facility in Manaus, Brazil. This new stocking facility, which represents the only legitimate source of AIM products in Brazil, enables the company to support a growing Brazilian market.
PFOA now in REACh and POP regulation On 4 July, PFOA - perfluorooctanoic acid, its salts and precursor compounds - was included in the POP (Persistent Organic Pollutants) Regulation (EU) 2019/1021 and at the same time also came into force in the REACh Regulation (Annex XVII, entry 68).
Manz AG receives further Battery order Manz AG is expanding its successful partnership with an international battery manufacturers in the Energy Storage segment with a further major order in the mid double-digit million euro range.
Advantech and Interlatin to set up JV in Mexico Industrial IoT specialist, Advantech, says it is establishing a joint venture subsidiary in Mexico with its channel partner Interlatin.
Mercedes-Benz takes equity stake in Farasis Mercedes-Benz is taking another important step on its journey towards CO₂--neutral mobility. The Stuttgart-based car manufacturer has launched a strategic partnership with Chinese battery cell manufacturer Farasis Energy (Ganzhou) Co., Ltd., including taking an equity stake.
A new EMS provider sees the light of day EMS providers DataED and Bestronics merge to launch a new player – Emerald EMS.
Tektronix joins the fight agains COVID-19 Tektronix has shifted its focus from supporting vehicle manufacturing to assisting with ventilator production.
ABB completes divestment of Power Grids to Hitachi ABB has reached a significant milestone in the company’s transformation towards a decentralized global technology company, with the completion of the divestment of 80.1% of its Power Grids business to Hitachi.
Germany amps up domestic battery production with massive state subsidies The German government is investing more than EUR 1.5 billion in battery cell research and production.
Internal promotions and executive retirements at Kimball EMS provider, Kimball Electronics, has made two new internal promotions aimed at contributing to the company accelerating its strategic growth plans.
Kyocera & TMDU team up for research on vitals measurement headset Kyocera Corporation and Tokyo Medical and Dental University (TMDU) have teamed up on a joint research project to develop a wireless headset that can remotely monitor high accuracy patient biometrics, such as blood oxygen saturation (SpO2).
German battery manufacturer receives funding for cell production facility VARTA AG receives public funding of EUR 300 million for battery cell production facility.
Scanfil to streamline its factory network The EMS provider is planning to combine the production of its Hamburg factory with its other factories in Germany and Poland
Kitron awarded new order within measurement technology Kitron has been awarded new business for measurement technology. The award covers a period of five years, and the expected annual value is between EUR 3.5-5 million.
NORBIT ASA awarded aquaculture contract Norwegian technology manufacturer, NORBIT, has been awarded a new contract from an existing customer within the aquaculture market.
Saki strengthens its Asian operations The AOI specialist is expanding its global sales organisation with new Asia sales department, and appointing Katsuhiro Eddie Ichiyama as Senior General Manager for the Asian region
Scanfil to sell its plant in Hangzhou, China The board of directors of the Finnish EMS prover has decided to sell the entire share capital of its subsidiary located in Hangzhou, China, for a total of EUR 18.4 million to Hangzhou Cabinet Technology Co., Ltd.
Staying put during the COVID-19 pandemic TPCA (Taiwan Printed Circuit Association) announced the production and sales data for Q1 2020; the output value of Taiwan cross-strait PCB industry totalled NT$136.9 billion (approx. US$4.541 billion) in Q1/2020.Load more news