© nomadsoul1 dreamstime.com Electronics Production | October 31, 2012
PV module prices continue to slide
Overcapacity, a decline in pricing as well as slowing growth in key worldwide markets will serve to keep the global photovoltaic (PV) market for solar modules depressed for the rest of the year, with recovery not expected until well in the second half of 2013, according to IHS.
Global revenue for the solar module industry comprising both crystalline and thin-film modules fell for the first time this year during the third quarter to $6.63 billion, down 7 percent from $7.14 billion in the second quarter. Prior to the decline, revenue had been up 2 percent in the second quarter from $7.03 billion in the first quarter. The market is projected to retreat further for a second time this year during the fourth quarter to $6.62 billion, with revenue continuing to trend down throughout the first half of 2013, as shown in the figure below. The industry will return to growth only by the second quarter next year, finally regaining lost ground by the fourth quarter when revenue springs back to an estimated $7.06 billion—just slightly more than when the market started in the first quarter this year. 2012—Markets grow in Q4, but prices won’t stabilize The decline in global solar module revenue could have been much worse, were it not for an installation surge inGermanythat drove the overall PV market in the second quarter. As a result, global installations at that time reached 8.2 gigawatts (GW), up 68 percent from 4.9GW the same period a year ago. The spike in demand helped temporarily slow down PV cell and module price declines. Nonetheless, as demand from Europe and the Asian markets—above all inChina—cooled during the third quarter, prices came under strong pressure again, particularly in August. In the process, the entire photovoltaic module value chain suffered in the third quarter: wafer prices dipped 11 percent; module prices fell 14 percent; and both cell and polysilicon prices plunged 17 percent. “After flattening in the third quarter, global installations are forecast to grow slightly in the fourth quarter to 8.7GW, bringing the annual total to more than 31GW, up 11 percent from 28GW in 2011. Even so, IHS does not consider the uptick in demand to be strong enough to prevent further price drops toward the end of the year,” commented Stefan de Haan, Principal Analyst at IHS. In addition to persistent overcapacity present in the industry since early 2011, two major trends will drive global prices further down. “First, demand in the fourth quarter will be fueled by installations inChina. But while many delayed solar projects in the country will be implemented during the remainder of the year and help improve global installation figures, China is a low-priced market. As a result, even a strong fourth quarter in China won’t induce a recovery in prices,” added de Haan. “Second, Chinese manufacturers are already reducing module shipments to Europe, in response to a European Commission investigation on anti-dumping charges of crystalline modules, cells and wafers originating from China. In exchange for the voluntary reduction of shipments fromChina, European wholesalers will aim to reduce their dependency on Chinese suppliers in the coming months and balance their portfolio,” concluded de Haan. And although IHS does not expect any duties to be implemented in Europe—unlike theU.S.case where similar charges againstChinahave been leveled—uncertainty is expected to arise in the market until final findings are published in December 2013. These developments are likely to increase pricing pressure on Chinese suppliers inEurope. Given the above two trends, average market pricing for crystalline modules is expected to decline by another 9 percent in the fourth quarter, falling to $0.64 per watt at the end of 2012, down from $0.70 at the end of September. b]2013—Suppliers’ situation will finally ease[/b] Relief for the PV module market will finally be in sight by 2013, IHS believes. True, the industry will have to go through another two tough quarters at the beginning of next year, but the overcapacity situation will ease in the second half, and the players that remain should return to profitability. Overall, global installation markets will pick up again after the first six months of 2013 and then continue to improve over the course of the year. Installations are expected to grow 10 percent on an annual basis, with Asian markets—particularlyChinaand Japan—compensating for declining demand fromEurope. With capacity expansion finally coming to an end, operational module manufacturing capacity is forecast to reach 51.9GW in 2013. Meanwhile, overcapacity that had built up because of massive investments in 2010 and 2011 will have less dramatic repercussions in 2013 than during this year, even if the issues will continue to be of concern. All told, the decline in PV module prices afflicting the market will slow down in 2013 and then eventually stop by the second half of the year. By the fourth quarter of 2013, average crystalline module prices are forecast to reach $0.55 per watt, down 14 percent from the same time in 2012, compared to a bigger contraction of 32 percent between the fourth quarter of 2011 to 2012. Revenues of the module industry that dropped throughout 2012 are predicted to bottom out in the first quarter of next year. From then on a recovery is expected. In Q4 2013 global module revenues are forecast to again surpass the mark of $7 billion. This is still significantly less than in the boom year 2010, when quarterly module revenues exceeded $10 billion in Q3 and Q4. It nevertheless marks the reversal of a trend that will help the most competitive suppliers to noticeably increase their profitability in the second half of 2013.
Intel to reclaim No.1 semiconductor supplier ranking in 2019 IC Insights says that only three among the top-15 semiconductor suppliers are forecasted to show growth this year.
Veoneer joins Autonomous Vehicle Computing Consortium Veoneer has joined the Autonomous Vehicle Computing Consortium (AVCC) to speed autonomous driving vehicle development.
Ongoing trade issues have opened up Chinese market for Viscom According to Carsten Salewski, Chinas move towards more independence has resulted in more customers from the region; especially within the automotive sector.
Don't forget about human inclusion in industry 4.0 Michael Ford from Aegis Software is reminding the industry in the midst of connectivity that our most powerful asset is still the human employee.
Sponsored content by SourcengineComponent Aggregators vs E-Commerce Marketplaces What is the difference between electronic component aggregators and a marketplace?
67% of a buyer’s journey is now done digitally. Learn how marketplaces emerged as full-cycle procurement platforms and challenged the traditional component aggregators.
East West Manufacturing acquires Adcotron EMS East West Manufacturing has acquired Adcotron EMS, a provider of specialized electronics manufacturing services, including advanced printed circuit board assemblies, box-build assemblies, testing, and new product introduction services.
Benchmark's Thailand facility earns MedAccred PCBA accreditation The EMS provider announces that its facility in Ayutthaya, Thailand has earned the MedAccred Printed Circuit Board Assembly accreditation.
HZO unveils larger HQ in North Carolina HZO, known for protective nano coatings designed to help electronics withstand corrosive liquid environments, held an open house at its new headquarters in Raleigh, North Carolina this week.
Luminator Technology relocates some production to Texas Luminator Technology Group has relocated production of its Apollo Video Technology RoadRunner mobile video security solutions to Luminator’s headquarters in Plano, Texas.
Sponsored content by EsemdaContract manufacturer Esemda opens new facility in Vilnius and expands EMS The new facility has been built with reserved space for future expansions. As Esemda constantly grows, it is of great importance to be able to rapidly increase production capacity in large volumes.
Kurtz Ersa invests heavily in development to stay on top With more than 30 percent of its employees involved in research and development, the company is making sure that it is able to respond to its customers needs at all times.
BMW's new battery cell centre to handle everything from material to prototyping The BMW Group is looking fortify its position in the world of electric mobility and has pooled its many years of experience with battery cells and extensive knowledge in the field in a new Competence Centre.
Cicor selected as production partner for drug delivery system Cicor announces that it has won a major new customer in the medical technology sector, one of the company's strategic target markets.
Keysight, FormFactor and CompoundTek to collaborate Keysight, FormFactor and CompoundTek, have formed a joint plan to provide an advanced photonics on-wafer testing solution to include automated alignment, simultaneous optical-optical and optical-electrical device tests.
Sponsored content by Z ElektronikaZ Elektronika opens new factory in Pécs To keep up with rapid growth of the company, on the 13th September Z Elektronika celebrated the grand opening of its new electronic design and manufacturing facility close to the highway in Pécs, Hungary, which adds new features and production site to its nearby location.
Wireless Telecom buys Holzworth Instrumentation Wireless Telecom Group Inc. has signed a definitive agreement to acquire Holzworth Instrumentation Inc., a Boulder, Colorado-based provider of specialty phase noise analyzers and signal generators.
NCAB Group acquires Altus-PCB in USA Altus-PCB is a full-service supplier of PCBs based in New Jersey, USA, that has a business model similar to NCAB’s. The US company has a high level of technical expertise and sells mainly to original equipment manufacturers (OEMs).
Mycronic's Thomas Stetter looks back at a successful year As the company is moving more and more towards becoming a full solutions provider, business is taking off and the numbers show very much confirms that the Mycronic's strategy is working.
IBL Löttechnik reviews 2019 IBL Löttechnik GmbH is staying on top of the market thanks to continues R&D investments.
Second install for EFI at Mid America Display Silicon Valley’s EFI will install a second EFI Nozomi C18000 single-pass inkjet, direct-to-board printer later this month to Mid America Display.
Ron Jakeman of Electrolube looks back at a successful 2019 Electrolube has been growing, both in terms of its footprint and financially, for a number of years not; Ron Jakeman details the company's progress.
Etteplan and Scanfil to start strategic cooperation in joint customer projects Engineering company Etteplan and contract manufacturer Scanfil have today agreed to enter a strategic partnership in Finland.
The lovechild of ACE Production and InterSelect Carlos Bouras of Nordson Select gave us the rundown of the result of the integration and combination of ACE Production and InterSelect GmbH - the new Integra.
American Battery Metals, U.S. lawmakers convene American Battery Metals Corporation has completed a series of meetings with lawmakers and personnel in the Department of Energy and Department of the Interior in Washington, D.C., to discuss issues critical to the domestic battery production and storage industry.
Cogiscan, Critical Mfg. form strategic partnership Quebec, Canada-based Cogiscan and Critical Manufacturing, headquartered in Portugal, have forged a strategic partnership to deliver smart factory solutions for electronics manufacturers.
Collins Aerospace expanding in North Africa Collins Aerospace Systems, a unit of United Technologies Corp., has taken the first step toward the expansion of its existing site in Casablanca, Morocco.
The advantage of Vantage - Garrett Wong tells the tale Nordson Asymtek's Garrett Wong gives us a rundown of the business year and also details the Vantage AdvantageLoad more news