Electronics Production | July 20, 2012
Annual gold, silver 'deposits' in high-tech goods worth $21bn+
New PCs, cell phones, tablets, other e-products now use 320 tons of gold, 7,500 tons of silver per year, and rising “Urban mining” deposits are 40 to 50 times richer than mined ore, experts tell 1st GeSI and StEP e-Waste Academy in Africa
A staggering 320 tons of gold and more than 7,500 tons of silver are now used annually to make PCs, cell phones, tablet computers and other new electronic and electrical products worldwide, adding more than $21 billion in value each year to the rich fortunes in metals eventually available through “urban mining” of e-waste, experts say. Manufacturing these high-tech products requires more than $16 billion in gold and $5 billion in silver: a total of $21 billion -- equal to the GDP of El Salvador -- locked away annually in e-products. Most of those valuable metals will be squandered, however; just 15% or less is recovered from e-waste today in developed and developing countries alike. Electronic waste now contains precious metal “deposits” 40 to 50 times richer than ores mined from the ground, experts told participants from 12 countries at last week’s first-ever GeSI and StEP e-Waste Academy for policymakers and small businesses, co-organized in Accra, Ghana by the United Nations University and the Global e-Sustainability Initiative (GeSI). Quantities of gold, silver and other precious metals available for recovery are rising in tandem with the fast-growing sales of electronic and electrical goods, including the new category of tablet computers (with 100 million in estimated unit sales this year, a figure expected to almost double in 2014). With respect to gold alone, electronic and electrical products consumed 5.3% (197 tons) of the world’s supply in 2001 and 7.7% last year (320 tons -- equal to 2.5% of the US gold reserves in the vaults of both Fort Knox, Kentucky, and the Federal Reserve Bank of New York). In that same decade, even as the world’s annual gold supply rose 15% -- from about 3,900 tons in 2001 to 4,500 tons in 2011 -- the price per ounce leapt from under $300 to more than $1,500. Thanks to the volume and value of precious metals e-waste contains, developing countries with an active informal recycling sector collect as much as 80-90% of their locally-generated e-waste. However, some 50% of the gold in e-waste is lost in crude dismantling processes in developing countries (compared with 25% in developed countries); just 25% of what remains is recovered using backyard recycling processes (compared with 95% at a modern high-tech recycling facility). The bottom line in rich and poor countries alike: just 10-15% of the gold in e-waste is recovered; at least 85% is lost. “Efforts such as the GeSI and StEP e-Waste Academy help create networks among policymakers and other relevant stakeholders for sharing information, ideas and best practices to foster real e-waste solutions and enable the transition to a closed loop and green economy,” said Luis Neves, Chairman of GeSI. “More sustainable consumption patterns and material recycling are essential if consumers continue to enjoy high-tech devices that support everything from modern communications to smart transport, intelligent buildings and more.” “Rather than looking at e-waste as a burden, we need to see it as an opportunity,” Alexis Vandendaelen of Belgium-based Umicore Precious Metals Refining told the participants. He recommended replacing notions of “waste management” with “resource management,” to enlarge their focus from mass and volume of used materials to include the quality of certain waste fractions, and to use solutions appropriate to local circumstances combined with internationally available strengths to pursue efficient, environmentally-sound recycling. A “best of two worlds” approach is needed for domestically-generated e-waste in developing countries: efficient local pre-processing followed by maximum recovery of materials and proper treatment of residual waste in countries with the best technologies for the job, with proceeds shared fairly and equitably. Chris Slijkhuis of MBA Polymers, a global firm specialised in recycling plastics, noted that a ton of plastic created through recycling requires one tenth as much water and energy as new plastic, and produces one to three fewer tons of carbon dioxide (CO2), the greenhouse gas largely blamed for climate change. Recycling just half the plastics in e-waste from the European Union alone would save 5 million kilowatt hours of energy, over 3 million barrels of oil in feedstock and nearly 2 million tons of CO2 emissions. “One day -- likely sooner than later -- people will look back on such costly inefficiencies and wonder how we could be so short sighted and wasteful of natural resources,” said Ruediger Kuehr, Executive Secretary of the Solving the E-Waste Problem (StEP) Initiative. “We need to recover rare elements to continue manufacturing IT products, batteries for electric cars, solar panels, flat-screen televisions and other increasingly popular products,” said Dr. Kuehr who is also head of the responsible Operating Unit of United Nations University, based in Bonn, Germany. Beyond the lost opportunity to recover valuable resources -- which also include copper, tin, cobalt, and palladium -- discarded consumer electronics that end up in landfills or are exported to developing countries create potential health and environmental hazards, he added. Said André Habets, head of research and development at the NVMP Association in the Netherlands, a sponsor of the academy: “We commit a lot of effort to trying to ensure that the e-waste generated in our country remains here and is recycled here, and we advocate tough measures against the illegal export of e-waste. Each of the parties involved needs to take its responsibility to solve the e-waste problem. If an actor doesn’t do this voluntarily, the relevant responsibility needs to be established by law.”
Cobham RAD sold to Radiation Test Solutions Cobham Advanced Electronic Solutions says that it has sold its Cobham RAD radiation testing business in Colorado Springs, to Radiation Test Solutions, Inc. (RTS).
Construction starts at Kyungshin new factory in Serbia The South Korean automotive company has initiated the construction of its new facility in the municipality of Smederevska Palanka in Serbia – once completed 700 new jobs will be created.
Manz: Erfolgreicher Produktionsstart bei Displayproduzent in China The Reutlingen-based engineering company Manz AG is further expanding its business in the contract manufacturing segment at its locations in Slovakia and China.
Celestica to manufacture ventilators for the Canadian market EMS provider Celestica has won a program to build 7,500 ventilators for StarFish Medical Inc., a Canadian medical device company, at Celestica’s operation in Newmarket, Ontario.
Ouman Estonia starts an expansion project Despite the current uncertain economical environment, Ouman says it believes in a brighter future and that the company is proud of the performance in its factories.
Reshaping production post COVID-19 As manufacturers re-open after COVID-19 related lockdowns, economic and supply chain disruptions may be felt beyond 2020. How companies shift in the short-term and plan for the long-term will be factors in defining “new normal” for the component industry.
Swedish EG Electronics acquires WEAB EG Electronics AB, a KAMIC Group company, has acquired all the shares in WEAB, Wermlands Elektronik AB.
ZF completes its acquisition of WABCO ZF Friedrichshafen AG has successfully completed the acquisition of commercial vehicle technology supplier WABCO, having gained approval from all required regulatory authorities.
Romanian EMS provider expands as it relocates Romanian EMS-Electra has successfully finalised the process of relocating to a new building, in the industrial area of Iasi, Romania.
Circuit Check partners with major healthcare company to build ventilators In early March, when a long-standing customer to the company, a major healthcare company approached Circuit Check to partner together to build over a dozen tests systems to assist in the COVID-19 efforts, Circuit Check responded quickly to the challenge.
TI maintains firm grip as world's top analog IC supplier TI's 2019 analog marketshare grew to 19% and ST climbed to fourth place as the top-10 suppliers collectively accounted for 62% of total analog sales.
Big Ass Fans adds third Hentec/RPS machine Complementing the purchase of two Hentec Industries/RPS Automation Vector 300 selective soldering machines in 2018, Big Ass Fans (BAF), a high-volume, low- speed (HVLS) airflow manufacturer, has just added a third machine to its factory in Newman Lake, Washington.
CE3 Electronics Inc. taps MIRTEC for 3D AOI technology Canada-based CE3 Electronics has purchased a MIRTEC MV-6 OMNI 3D AOI machine.
Gémosz is still looking to grow – but the pandemic brought new perspectives Winston Churchill famously said, “Never let a good crisis go to waste”. While this was said in a vastly different context than the current crisis of the COVID-19 pandemic, there is still truth to the fact that a crisis not only allows for change – but sometimes forces it.
North American PCB industry sales up 4.3% in April The IPC says that total North American PCB shipments in April 2020 were up 4.3% compared to the same month last year. Compared to the preceding month, April shipments fell 18.2%.
Volkswagen intensifies e-mobility activities in China Volkswagen has initiated the next chapter for its business in China. The automotive giant plans to increase its share in JAC Volkswagen, its joint venture for e-mobility.
GPV Selects Aegis as global smart factory partner Driven originally by accelerating customer expectations for traceability, GPV has selected Aegis’ FactoryLogix Smart digital manufacturing solution, targeting multiple values and benefits.
REDCOM EMS expands certification for medical device manufacturing New York-based REDCOM EMS has secured ISO 13485:2016 certification, complementing the company’s existing ISO 9001:2015 and AS9100D certifications.
Ozark Integrated Circuits nabs U.S. Air Force grant Arkansas-based Ozark Integrated Circuits Inc., located in the Arkansas Research and Technology Park at the University of Arkansas, has received a USD 750,000 award from the U.S. Air Force.
Norwegian EMS adds employees to Polish unit The last couple of months Norautron has welcomed three new colleagues at its office in Sdunska Wola, Poland.
Daimler’s battery production in Kamenz gradually increases production Local battery production is described as an important success factor for Mercedes-Benz AG’s electric offensive and a key element to flexibly and efficiently meet the global demand for electrified vehicles.
Tepcomp invests in new additional production line Finnish EMS provider, Tepcomp Group, has made a significant investment at its production plant in Turku. The new surface mount technology production line will significantly improve the productivity and energy efficiency of the plant.
Valoe is on schedule with both production and expected deliveries Valoe says it will start manufacturing IBC test modules in Juva, Finland in June and cell deliveries from Lithuania to customers is scheduled to start according to plan.
AMTE Power and Britishvolt sign MoU for GigaFactory AMTE Power and Britishvolt plans to investigate collaborating to build the UK’s first full cycle battery cell GigaPlant, servicing the automotive and energy storage markets.Load more news
- Raspberry Pi audio HAT board with MERUS class D multilevel amplifier
- Romanian EMS provider expands as it relocates
- ASML ships first-generation multibeam inspection system ‘eScan1000’
- Gémosz is still looking to grow – but the pandemic brought new perspectives
- North American PCB industry sales up 4.3% in April