Electronics Production |
HP TouchPad carries USD 318 BOM
The 32GB version of Hewlett-Packard's new TouchPad media tablet carries a bill of materials (BOM) of USD 318, according to IHS.
When the USD 10.00 manufacturing cost is added in, the total cost to produce the high-end version of the TouchPad increases to USD 328. The compares to a retail price of USD 599. The low-end 16GB version of the TouchPad carries a BOM of USD 296, for a total of USD 306 when the manufacturing cost is factored in. The retail price for this model is USD 499.00.
The table presents the preliminary estimate of the TouchPad BOMs and manufacturing costs from the IHS iSuppli Teardown Analysis Service. Please note that the assessment accounts only for hardware costs and does not take into consideration other expenses such as software, licensing, royalties and other expenditures. / © IHS iSuppli
While the TouchPad media tablet invites comparisons with the genre-defining iPad from Apple Inc., the similarities only go so far when assessing the two products’ relative features and design.
“The TouchPad in some ways does closely resemble the original iPad, with its use of the same LG display Apple used in the first-generation iPad, and by initially offering a product that only employs Wi-Fi as its exclusive wireless connection,” said Andrew Rassweiler, senior director, teardown services, for IHS.
“However, there are major differences between the two platforms. For example, unlike the iPad, the TouchPad does not try to push the design envelope with an ultrathin form factor or in the use of exotic materials. HP’s choice of plastic enclosure adds to the increased thickness of the device, which also results in the density of the electronic design being much lower compared with Apple products. Furthermore, the TouchPad also features a built-in wireless charging system, something we haven’t seen in other tablets to date.”
Where the TouchPad really stands apart from all the media-tablet competition is in on the software side, with its use of the web OS operating system, derived from the popular Palm OS developed by Palm Inc. which was acquired by HP in 2010. As it faces off against the iPad and a sea of Android-based alternatives, webOS provides the clearest point of differentiation for HP’s TouchPad.
Thicker than water
One notable design shortcoming for the TouchPad compared to the iPad 2 comes in the area of thickness, a key allure that makes the Apple device desirable to consumers. The TouchPad is 13.7 millimeters thick, while the iPad 2 is a slim 8.8 millimeters.
With space at much less of a premium, the TouchPad’s PCB appears to be sparsely populated with integrated circuits and other components compared to the dense electronic layout of the first- and second-generation iPads. Some of this extra board space may be filled with wireless components in a future 3G version of the TouchPad, Rassweiler speculated.
In the loop
The TouchPad features an inductive loop or coil mounted in the rear of the enclosure, which enables wireless battery recharging. The system, dubbed Touchstone, recharges the battery when the TouchPad is placed on top of an inductive charger. Although the TouchPad is prewired for this feature, it requires the optional Touchstone charger to make it work. Touchstone previously was used in the Palm Pre smartphone.
Display doppelganger for TouchPad and iPad
The display in the TouchPad appears to be the same as that seen in the first-generation iPad: a 9.7-inch, 1'024 by 768 pixel resolution liquid crystal display (LCD) using in-place switching (IPS) technology. The display is supplied by LG Display Co. Ltd. Priced at USD 69.00, the display subsystem is most expensive portion of the TouchPad design, accounting for 21.7% of the 32GB version’s total.
The capacitive, glass-on-glass touch screen assembly is the next most costly subsystem at USD 63.50, or 20% of the BOM. While it’s not possible to identify the touch screen assembly supplier via teardown analysis, IHS iSuppli believes two likely sources for this component are Wintek Corp. and TPK Holding Co. Ltd.
Setting memory standards
Next on the cost countdown is the NAND flash memory, priced at USD 45.00 for the 32GB version, and representing 14.1% of the BOM. The NAND is used for storage of data, such as apps, video, audio and images. In the individual TouchPad torn down by IHS iSuppli, SanDisk Corp. supplies these NAND parts, which are based on the company’s semi proprietary iNAND standard.
The mechanical/electromechanical subsystem is the fourth most expensive portion of the TouchPad, costing USD 30.00, or 9.4% of the BOM. These devices and materials comprise the enclosure, plus the PCBs and connectors.
The mobile DRAM portion of the system, made by Samsung Electronics Co. Ltd., is priced at USD 26.00, or 8.2% of the BOM. The TouchPad employs 8Gb of mobile double data rate (DDR) 2 DRAM, an extremely high density.
Qualcomm stands alone
The next most costly subsystem is the apps processor: the Qualcomm Inc. APQ8060 dual-microprocessor core device operating at 1.5GHz. Priced at USD 20.00, the apps processor accounts for 6.3% of the BOM.
“While the IHS iSuppli teardown analysis service has identified many Qualcomm solutions in the past, this is the first time we have seen a standalone Qualcomm applications processor without the usual accompaniment of wireless functionality Qualcomm is famous for, such as 3G capability,” Rassweiler said. “Future versions of the TouchPad likely will employ a more complete Qualcomm solution, allowing them to access 3G wireless services.”
Fat battery
The battery pack is priced at USD 19.40, accounting for 6.1% of the BOM. The TouchPad utilizes a two-cell lithium-ion battery from Amperex Technology Ltd.
Powerful power management
Next on the cost list is the power management subsystem, at USD 12.50, or 3.9% of the total BOM. The system features six major integrated circuits supplied by Qualcomm, Texas Instruments Inc. and Maxim Integrated Products Inc.
Subsystem analysis
Other notable TouchPad design attributes revealed by the IHS iSuppli teardown include:
- The touch control/driver PCB, consisting of a modular turnkey solution from Cypress Semiconductor Corp., which features six Cypress chips. Atmel is a major competitor to Cypress in this space.
- The user interface subsystem, featuring a 3-axis gyroscope from InvenSense Inc. and a single-device 3-axis accelerometer with integrated 3-axis magnetometer from STMicroelectronics.
- The wireless local area network/Bluetooth subsystem, employing the Qualcomm Atheros Inc. Radio on Chip solution for mobile. This chip requires fewer external supporting components than other discrete solutions.
The table presents the preliminary estimate of the TouchPad BOMs and manufacturing costs from the IHS iSuppli Teardown Analysis Service. Please note that the assessment accounts only for hardware costs and does not take into consideration other expenses such as software, licensing, royalties and other expenditures. / © IHS iSuppli
While the TouchPad media tablet invites comparisons with the genre-defining iPad from Apple Inc., the similarities only go so far when assessing the two products’ relative features and design.
“The TouchPad in some ways does closely resemble the original iPad, with its use of the same LG display Apple used in the first-generation iPad, and by initially offering a product that only employs Wi-Fi as its exclusive wireless connection,” said Andrew Rassweiler, senior director, teardown services, for IHS.
“However, there are major differences between the two platforms. For example, unlike the iPad, the TouchPad does not try to push the design envelope with an ultrathin form factor or in the use of exotic materials. HP’s choice of plastic enclosure adds to the increased thickness of the device, which also results in the density of the electronic design being much lower compared with Apple products. Furthermore, the TouchPad also features a built-in wireless charging system, something we haven’t seen in other tablets to date.”
Where the TouchPad really stands apart from all the media-tablet competition is in on the software side, with its use of the web OS operating system, derived from the popular Palm OS developed by Palm Inc. which was acquired by HP in 2010. As it faces off against the iPad and a sea of Android-based alternatives, webOS provides the clearest point of differentiation for HP’s TouchPad.
Thicker than water
One notable design shortcoming for the TouchPad compared to the iPad 2 comes in the area of thickness, a key allure that makes the Apple device desirable to consumers. The TouchPad is 13.7 millimeters thick, while the iPad 2 is a slim 8.8 millimeters.
With space at much less of a premium, the TouchPad’s PCB appears to be sparsely populated with integrated circuits and other components compared to the dense electronic layout of the first- and second-generation iPads. Some of this extra board space may be filled with wireless components in a future 3G version of the TouchPad, Rassweiler speculated.
In the loop
The TouchPad features an inductive loop or coil mounted in the rear of the enclosure, which enables wireless battery recharging. The system, dubbed Touchstone, recharges the battery when the TouchPad is placed on top of an inductive charger. Although the TouchPad is prewired for this feature, it requires the optional Touchstone charger to make it work. Touchstone previously was used in the Palm Pre smartphone.
Display doppelganger for TouchPad and iPad
The display in the TouchPad appears to be the same as that seen in the first-generation iPad: a 9.7-inch, 1'024 by 768 pixel resolution liquid crystal display (LCD) using in-place switching (IPS) technology. The display is supplied by LG Display Co. Ltd. Priced at USD 69.00, the display subsystem is most expensive portion of the TouchPad design, accounting for 21.7% of the 32GB version’s total.
The capacitive, glass-on-glass touch screen assembly is the next most costly subsystem at USD 63.50, or 20% of the BOM. While it’s not possible to identify the touch screen assembly supplier via teardown analysis, IHS iSuppli believes two likely sources for this component are Wintek Corp. and TPK Holding Co. Ltd.
Setting memory standards
Next on the cost countdown is the NAND flash memory, priced at USD 45.00 for the 32GB version, and representing 14.1% of the BOM. The NAND is used for storage of data, such as apps, video, audio and images. In the individual TouchPad torn down by IHS iSuppli, SanDisk Corp. supplies these NAND parts, which are based on the company’s semi proprietary iNAND standard.
The mechanical/electromechanical subsystem is the fourth most expensive portion of the TouchPad, costing USD 30.00, or 9.4% of the BOM. These devices and materials comprise the enclosure, plus the PCBs and connectors.
The mobile DRAM portion of the system, made by Samsung Electronics Co. Ltd., is priced at USD 26.00, or 8.2% of the BOM. The TouchPad employs 8Gb of mobile double data rate (DDR) 2 DRAM, an extremely high density.
Qualcomm stands alone
The next most costly subsystem is the apps processor: the Qualcomm Inc. APQ8060 dual-microprocessor core device operating at 1.5GHz. Priced at USD 20.00, the apps processor accounts for 6.3% of the BOM.
“While the IHS iSuppli teardown analysis service has identified many Qualcomm solutions in the past, this is the first time we have seen a standalone Qualcomm applications processor without the usual accompaniment of wireless functionality Qualcomm is famous for, such as 3G capability,” Rassweiler said. “Future versions of the TouchPad likely will employ a more complete Qualcomm solution, allowing them to access 3G wireless services.”
Fat battery
The battery pack is priced at USD 19.40, accounting for 6.1% of the BOM. The TouchPad utilizes a two-cell lithium-ion battery from Amperex Technology Ltd.
Powerful power management
Next on the cost list is the power management subsystem, at USD 12.50, or 3.9% of the total BOM. The system features six major integrated circuits supplied by Qualcomm, Texas Instruments Inc. and Maxim Integrated Products Inc.
Subsystem analysis
Other notable TouchPad design attributes revealed by the IHS iSuppli teardown include:
- The touch control/driver PCB, consisting of a modular turnkey solution from Cypress Semiconductor Corp., which features six Cypress chips. Atmel is a major competitor to Cypress in this space.
- The user interface subsystem, featuring a 3-axis gyroscope from InvenSense Inc. and a single-device 3-axis accelerometer with integrated 3-axis magnetometer from STMicroelectronics.
- The wireless local area network/Bluetooth subsystem, employing the Qualcomm Atheros Inc. Radio on Chip solution for mobile. This chip requires fewer external supporting components than other discrete solutions.
