Sponsored content by Nordson ASYMTEK
Conformal Coating Results — When You Need Better Than Just "Good Enough"
Conformal coating contributes to product quality and reliability, but it is typically viewed as a process that tolerates sufficient results, or "good enough." That view is changing as more advanced and diverse electronic products enter the consumer marketplace, from the Internet of Things to self-driving vehicles.
Although conformal coating is often an automated, high-speed, in-line process, coating inspection is usually a manual process. Some conformal coatings used by electronics manufacturers contain UV indicators to enable coating inspection. Since coatings are transparent, parts must be viewed under ultraviolet or black light to verify coverage and non-coverage. Automated coating inspection (ACI) systems are a relatively recent addition to the assembly process, although manual inspection is still the most prevalent form of inspection. In a manual process, operators inspect coated boards for adherence to keep-out zones, accurate coating thicknesses, the existence of bubbles, and consistent coverage. Click here to read the article and learn more.
Norautron Suzhou inks new contract with Efore Norautron Suzhou Co.Ltd announces a new cooperation with Efore Electronics Suzhou Co.Ltd.
Sourceability appoints new managing director for APAC Semiconductor veteran joins the management team of digital supply chain solutions provider.
POET and Sanan IC to form a joint venture company POET Technologies and Xiamen Sanan Integrated Circuit (Sanan IC), a wholly owned subsidiary of Sanan Optoelectronics, have signed a definitive joint venture contract.
From wafer sawing to the finished packaged component Encapsulation is essential for the reliability of a component, as it needs to protect the sensitive silicon and bonding joints even under variable environmental conditions or temperature ranges. High-quality packaging is therefore indispensable to ensure the functionality and reliability of a component and the entire device.
Sponsored content by JBCHigh Quality & efficient fume extraction is not only important to meet workplace regulations It's also important to ensure the safety and health of everyone. Soldering fumes and gases may be one of the main causes of potential health problems at any soldering workplace without a proper fume extraction. To protect all employees and their health, keep the following suggestions in mind!
Avnet Silica names Gilles Beltran as president Beltran succeeds Mario Orlandi who takes on global assignments in Avnet.
While close to settling legal case with US, UMC to focus more on foundry business UMC has announced today (Oct. 22) that the legal case against the company filed by the U.S. Justice Department for stealing trade secrets could now be resolved as soon as possible, according to TrendForce’s latest investigations.
Kitron’s record performance continues amidst the pandemic The EMS provider reported strong growth and record profit for the third quarter of 2020 – mainly driven by the Medical devices, Defence/Aerospace and Industry sectors.
Huawei opens new R&D centre in Hungary The Chinese telecom company opened the R&D Center in Budapest as it’s celebrating its 15th anniversary in Hungary.
Sponsored content by NCAB Group BeneluxHow to design a high speed PCB! It wasn’t that long ago when the word “high speed” didn’t exist in the vocabulary of PCB designers. Thinking back for example at the 90’s and 00’s, the speeds they used were much slower. In 2005, 3 Gbps was considered the typical high speed data rate, but today engineers are dealing with 10 Gbps, or even 25 Gbps.
SkyWater is looking to lease a 200 mm fab in Florida Having just completed the expansion of its Minnesota facility, SkyWater does not seem to be done adding to its footprint. The company is looking to take over the Center for Neovation, a 200 mm semiconductor manufacturing facility.
Airbus Ventures invests in Singapore startup Airbus Ventures latest investment has led the company to Singapore and Zero Error Systems (ZES).
General Motors invests in its electric future General Motors says that its Spring Hill, Tennessee assembly plant will begin the transition to become the company’s third vehicle manufacturing site to produce electric vehicles. The automaker also says that it will invest heavily in five Michigan plants.
Hisense Gorenje to start European production of TVs in January As we move into the next year, Hisense owned Gorenje Group will start production of TV sets for the European market at its plant in Velenje, Slovenia, as part of the new Hisense Europe Electronic company.
Wistron to expand in Malaysia – acquires Western Digital plant In a filling on the Taiwanese stock exchange, the company has disclosed that it will acquire a plant from Western Digital (WD) in Malaysia via its subsidiary Wistron Technology (Malaysia).
SK Hynix holds second highest NAND market share via acquisition of Intel’s NAND capacity SK Hynix has announced today (Oct. 20) that it will acquire Intel’s NAND Flash business and Dalian-based Fab 68, which is dedicated to 3D NAND Flash production, for USD 9 billion.
Harwin addresses increased demand for Hi-Rel connectors with new facility The expansion at the manufacturer’s Portsmouth headquarters in the South of England will increase the company’s production output by 30%.
Blackstone has found the location for its battery cell production The Swiss company, focusing on battery technology and battery metals, says that a decision has been made on the location of its battery cell production facilities for its subsidiary Blackstone Technology GmbH.
US foundry makes the case for a secure domestic chip production SkyWater Technology’s expansion in Bloomington, Minnesota, has progressed quickly. The project started less than a year ago and on October 12, the company held a ribbon-cutting ceremony to celebrate the completion of the expansion.
Wistron continues Taiwanese expansion – sets up third R&D office The Taiwanese manufacturer has announced that it is adding to its set up in the country. The company will establish and R&D office in Kaohsiung, Wistron’s third R&D office in the city.
Terry Gou addresses Foxconn's Wisconsin investment “Foxconn will remain committed to the completion and continued expansion of our project and investment in Wisconsin as long as policymakers at the federal, state, and local levels remain committed to Foxconn,” Terry Gou says.
Volkswagen invests to up the automation of several plants The Volkswagen Passenger Cars and Volkswagen Commercial Vehicles brands are working flat out on the transformation to the e-mobility era and the conversion of plants to e-mobility.
AT&S appoints Simone Faath as CFO With the appointment of Simone Faath as CFO, the AT&S Management Board is now complete again.
SK hynix to acquire Intel NAND memory business The two parties have signed an agreement under which SK Hynix will acquire Intel's NAND memory and storage business for USD 9 billion.
High power quarter brick isolated DC/DC converter addresses demands of energy-conscious data centers Continuing to extend its portfolio of high-density DC/DC converter solutions with built-in digital interfaces, Flex Power Modules introduces two variants of the new BMR491 series.
Wipro to acquire Eximius Design The information technology specialist says it has signed a definitive agreement to acquire Eximius Design, an engineering services company with strong expertise in semiconductor, software and systems design.Load more news