Products | September 17, 2021
Switched capacitor intermediate bus converter delivers high power density for 48 V applications
Flex Power Modules introduces the BMR310, a non-isolated switched capacitor intermediate bus converter (IBC) which provides high power density for data centers, thus improving board space utilization and freeing space for other components.
This is a product release announcement by Infineon Technologies AG. The issuer is solely responsible for its content.
Built on the proprietary Zero voltage switching Switched capacitor Converter (ZSC) technology of Infineon Technologies AG (FSE: IFX / OTCQX: IFNNY), the BMR310 achieves efficiency of over 98 percent at half load and can deliver power up to 875 W continuous in a compact package. It operates over an input voltage range of 40 V to 60 V, and delivers an unregulated output voltage of 10 V to 15 V.
For data centers and high-performance computing (HPC) applications, there is a growing trend to move away from 12 V and adopt 48 V power distribution to reduce distribution currents and power losses. To meet this increasing demand, the Infineon ZSC delivers the highest efficiency and power density for applications using 48 V to generate an intermediate bus voltage. This is achieved through capacitive energy transfer with soft switching of the power MOSFETs, and therefore enables an easy and low-risk migration path for legacy 12 V systems to a 48 V infrastructure at significantly reduced total cost of ownership (TCO).
“Infineon’s ZSC topology is a meaningful change in power distribution and enables us to deliver the high efficiency and power density that’s needed for data centers, today and tomorrow,” said Mikael Appelberg as Chief Technology Officer at Flex Power Modules.
“By fostering collaboration within the industry and utilizing our application knowledge, we optimize our devices with the system in mind,” said Richard Kuncic, Vice President & General Manager DC/DC at Infineon’s Power & Sensor Systems Division. “We are proud to see that our partners are able to engineer groundbreaking solutions with our technology.”
The BMR310 is mounted horizontally with a height profile of 10.3 mm, making it suitable for systems with limited space due to large heatsinks or cold plates. It measures 58.4 mm x 25.0 mm x 10.3 mm (2.3 x 0.98 x 0.41 in 3). The current mounting option is base-plated but an open frame will be available with future models.
To maximize operating lifespan, the BMR310 includes over-voltage, under-voltage, over-current and over-temperature protection function. As with all Flex Power Modules’ DC/DC converters, it complies with IEC/EN/UL 62368-1 safety standards.
Paralleling of converters is supported using passive droop load sharing, enabling multiple converters to be combined to deliver higher power if required. The BMR310 is compatible with the Flex Power Designer software tool, and the new converter includes a PMBus interface for digital control.
Availability
The BMR310 will be available in November 2021 with evaluation samples for OEM orders available now. Customers can obtain further information by contacting pm.support@flex.com. More information about 48 V power distribution can be found here.
Ferrotec to add manufacturing capacity with new plant in Malaysia
Ferrotec, a global supplier of materials, components, and precision system solutions, is establishing a new manufacturing facility at Kulim Hi-Tech Park, Kedah, facilitated by the Malaysian Investment Development Authority (MIDA).
Skeleton targets the Polish market – teams up with ZPUE
Supercapacitor specialist, Skeleton Technologies, and ZPUE, a Polish manufacturer of electrical devices for electrical power distribution utilities, have entered into a commercial agreement to provide energy storage solutions to the Polish market.
Sponsored content by Fusion
Manufacturers Reassess their Supply Chains
Prevailing obstacles since the COVID-19 Pandemic in 2020 have manufacturers reassessing their supply chain strategies. The following major disruptions that occurred entering 2022 added to existing setbacks, or created new ones altogether:
ERP partners with Flip to fulfill EOL and Obsolete component solutions
Flip Electronics has signed a franchised distributor partnership agreement with ERP Power (ERP) to distribute its End-of Life (EOL) semiconductor products.
Foxconn and DNeX build and operate wafer fab in Malaysia
Dagang NeXchange Berhad (DNeX) and Foxconn subsidiary Big Innovation Holdings (BIH), plan to set up a joint venture company to build and operate a new 300mm wafer fab in Malaysia.
Imec and semiconductor partners target greener chip manufacturing
Nanoelectronics research and innovation center, imec, says that it has managed to pool together stakeholders from the semiconductor value chain – from companies such as Apple and Microsoft, to suppliers, including ASM, Kurita, SCREEN and Tokyo Electron – to participate in its Sustainable Semiconductor Technologies and Systems (SSTS) research program.
SiPearl reaches milestone – 100 employees
The European chip designer has exceeded 100 employees across its six sites in France (Maisons-Laffitte, Grenoble, Massy, Sophia Antipolis), Germany (Duisburg) and Spain (Barcelona).
Arrow names Jörg Strughold as president EMEA components
Arrow Electronics announces that Jörg Strughold will take over as president of its components business in EMEA. He succeeds Martin Bielesch who has decided to leave the company.
€14 billion to attract semiconductor players to Germany
EUR 14 billion in state support is the German governments new strategy to attract more chipmakers to the country.
10 different companies have expressed interest in Toshiba
Back in April 2022, Toshiba Corporation announced that it had resolved to solicit proposals on strategic alternatives from potential investors and sponsors. The Japanese company is seeking to enhance its corporate value and has since the announcement been holding discussions with the potential partners.
Avnet breaks ground on German expansion
In order to better serve its customers’ local and global needs, Avnet is expanding in two locations in Germany. Avnet Embedded broke ground on a new manufacturing site in Eschbach and Avnet EMEA plans to build its third European logistics centre in Bernburg.
Viettel & Qualcomm team up on 5G infrastructure development
Viettel Group and Qualcomm Technologies plans to collaborate and develop a next-generation 5G Radio Unit (RU) with massive MIMO capabilities and distributed units (DUs). This focuses on helping to expedite the development and roll-out of 5G network infrastructure and services in Vietnam and globally.
Applied Materials opens Montana expansion – create 200 new jobs
The company has opened its latest expansion in Montana, a new semiconductor manufacturing center set to create 200 jobs in the Flathead Valley.
How to easily select the right frequency generation component
Question: What is the right frequency generation component for my application?
Bell Semiconductor is suing companies left and right
In late April, Bell Semiconductor, a Pennsylvania-based technology and intellectual property licensing company, filed lawsuits against Micron, Infineon, Nvidia and seven other companies alleging infringement of one of its patents.
Can pre-owned equipment be the way out of the shortage?
The global semiconductor supply chain remains under immense pressure. However, major investments are being made to increase capacity and fortify the supply chain for the future – but we wont feel the effect of these investments for years. Adding to the issue, there is not enough chips for the chipmaking machines.
CN Rood takes over ABtronix
Test and measurement equipment supplier, CN Rood, expands its position in both Scandinavia and the Belelux via the acquisition of ABtronix, professional T&M equipment.
STMicro supplies SiC tech to Semikron for EV power modules
STMicroelectronics has revealed it is supplying SiC technology for the eMPack electric-vehicle power modules from Semikron.
Henkel opens new application center in Silicon Valley
Henkel is opening its Application Center in Santa Clara, California designed to support product development for the company's high-tech customers in the Silicon Valley region. The application center will help expedite proof-of-concept initiatives for electronics advances.
Continued strong demand for Infineon amid global uncertainties
The German semiconductor power house continues to perform well, reporting a 22% revenue increase for the second quarter of 2022.
Allegro MicroSystems' CEO to retire – successor already appointed
Allegro MicroSystems' President and CEO, Ravi Vig, is retiring. Mr. Vig, will retire, effective June 13, 2022, from his roles as President, CEO and a member of the board of directors, which he has held since 2016.
Load more news