Products | May 14, 2021
MasterGaN reference design demonstrates heatsink-free 250W resonant converter
STMicroelectronics has released the first reference design for its MasterGaN power packages, demonstrating how the new highly integrated devices increase power density, boost energy efficiency, simplify design, and accelerate time to market.
This is a product release announcement by STMicroelectronics. The issuer is solely responsible for its content.
The EVLMG1-250WLLC reference design is a 250W resonant converter with a 100mm x 60mm board outline and 35mm maximum component height. It features the MasterGaN1, which contains one half-bridge STDRIVE gate driver optimally connected to two 650V normally-off GaN transistors with matched timing parameters, 150mΩ on-resistance (Rds(on)), and 10A maximum current rating. The logic inputs are compatible with signals from 3.3V to 15V. MasterGaN1 is suitable for high-efficiency soft-switching topologies including resonant converters, active clamp flyback or forward converters and bridgeless totem-pole PFC (power-factor correction) in AC/DC power supplies, DC/DC converters, and DC/AC inverters up to 400W. The primary side runs heatsink-free, leveraging the high efficiency of the GaN power transistors. In addition, GaN’s superior switching performance allows a higher operating frequency than ordinary silicon MOSFETs, permitting smaller magnetic components and capacitors for greater power density and reduced bill of materials. Designed for a nominal 400V supply, the EVLMG1-250WLLC provides a 24V/10A output and achieves maximum efficiency above 94%. Benefiting from MasterGaN’s integrated safety features, the converter output is protected against short circuit and overcurrent. There is also brown-out protection and an input-voltage monitor that permits sequencing within an array of DC/DC converters and prevents a motor from starting under low-voltage conditions. ST’s MasterGaN family comprises pin-compatible integrated half-bridge products including symmetrical and asymmetrical configurations, housed in a 9mm x 9mm low-profile GQFN package. Containing circuitry rated up to 650V, the packages have over 2mm creepage distance between high-voltage and low-voltage pads. MasterGaN modules are available in various power ratings, allowing engineers to scale their designs with minimal hardware changes. The EVLMG1-250WLLC is available now from st.com and distributors, for $230.00. For more information please go to www.st.com/gatedrivers
ICsense continuous growth and invests to support mass production ICsense, a TDK company and subsidiary that focuses on ASIC supply and custom IC design services, is scaling up its bench test facilities by 40% and installing in-house ATE (Automated Test Equipment) facilities to uniquely offer its customers mass production-ready ASICs.
Sponsored content by congatec AGLow-power flagship for artificial intelligence congatec is expanding its SMARC platform with a new module with an NXP i.MX 8M Plus processor especially for embedded AI applications. Thanks to the extensive ecosystem with application-ready 3.5-inch carrier board, Basler cameras, and AI software stack, fast proof of concept is possible.
KAMIC Group acquires manufacturer of magnetic components KAMIC Group AB has acquired all the shares in Talema Group, a manufacturer of magnetic components such as transformers, toroids, inductors and chokes with associated design work. The seller is an owner consortium consisting of the Park and Daily families.
designLED Products acquired by automotive tech company LED lighting technology company, designLED Products, has been acquired by Faurecia for an undisclosed sum. Livingston based designLED has developed a technology suited to a growing range of automotive lighting and human machine interface (HMI) applications.
Digi-Key Electronics partners with Rochester Electronics Rochester Electronics joins Digi-Key's marketplace. The partnership will guarantee authentic components at a time when component counterfeit is on the rise due to shortages and high demand.
Sponsored content by ICAPE GroupICAPE Group Service Office in Asia In a context where traveling can be difficult, finding a good partner for your production of electronics parts can be a real challenge. With its unique organization and a Headquarters in China where all the key services are located close to the factories and fully operational, ICAPE Group provides a global solution.
Massive fire at Chinese polysilicon plant Daqo New Energy, a Chinese manufacturer of high-purity polysilicon, has been pointed out as the company who suffered an "explosion" at a polysilicon plant in Shihezi City, Xinjiang, China yesterday.
Bosch officially opens wafer fab in Dresden Fully connected, data-driven, self-optimising - those are the three keywords used to describe Bosch's new, massive, wafer fab in Dresden.
GF and GlobalWafers partner to expand semiconductor wafer The USD 800 million supply deal includes USD 210 million in capital expansion, the creation of more than 75 jobs in Missouri and will provide wafers for GlobalFoundries' manufacturing facilities in New York and Vermont.
JCET completes acquisition of ADI's Singapore test facility The provider of IC manufacturing and technology services has officially completed the acquisition of Analog Devices' Singapore test facility, with its test staff to be transferred to the JCET operations team in the near future.
Sponsored content by Shenzen Kinwong ElectronicThe development trend of printed circuit board products and Kinwong's solution With the rapid development of electronic technology in recent years, printed circuit board (PCB) products are pursuing higher heat dissipation capabilities, with high voltage and high current characteristics, and are developing towards high-density interconnection technology (HDI).
Advanced Energy acquires TEGAM for $18 million Advanced Energy is adding metrology and calibration instrumentation to its RF process power solutions in semiconductor and advanced industrial markets via the acquisition of TEGAM.
King Yuan expects output to take a hit after Covid-shutdown Taiwanese chip packager King Yuan Electronics (KYEC) had to halt all production on Friday following the discovery that several employees had contracted COVID-19
BorgWarner acquires 89% of Akasol Shareholders of AKASOL AG have accepted the voluntary public takeover offer by ABBA BidCo AG, a subsidiary of BorgWarner Inc., after the extended acceptance period expired with an acceptance rate of 89.08% of the Akasol shares outstanding.
Achieving a fully differential output using single-ended instrumentation amplifiers Question: Can we generate a differential output signal using instrumentation amplifiers?
Acuity Brands acquires the DS business in North America from ams Osram ams OSRAM announces the sale of the North America-Based Digital System (DS) business, which primarily manufactures lighting control systems, electronics and drivers, to long-time customer and partner Acuity Brands.
Bosch gives the official go-ahead in Dresden Next week - on June 7th, 2021 - the Bosch semiconductor factory in Dresden will officially open. The Saxon high-tech industry association 'Silicon Saxony' is hoping that it will send a positive signal to other companies.
Virus outbreak in Vietnam delays Fingerprint's Q2 revenues Swedish biometrics company, Fingerprint Cards, says that parts of the company’s Q2 revenues will be delayed due to the covid-19 outbreak in Vietnam.
u-blox increases guidance for FY 2021 u-blox has updated its financial guidance for the full year 2021.
TI tops Analog IC supplier list with room to spare Skyworks Solutions posts the strongest sales increase in 2020 as the top-10 suppliers collectively accounted for 62% of total analog sales, reports market researcher IC Insights.
Lockdown in Malaysia to have no effect on chip companies National governments in Southeast Asian countries, including Thailand, Vietnam, and Malaysia, have been instituting increasingly stringent pandemic control measures in response to the intensifying COVID-19 pandemic in these countries.
TSMC starts construction of Arizona chip fab TSMC has started construction at a site in Arizona where it plans to spend USD 12 billion to build a computer chip factory.
Jenoptik to expand its optics manufacturing capacities The German photonics group has acquired a property in Dresden and will invest in new cleanroom fab. Construction is expected to start during the second half of next year and production is slated to start in early 2025.Load more news