Products | January 26, 2021
24 V dual-channel low side EiceDRIVER™ with enable function and integrated thermal pad
Infineon Technologies AG broadens its EiceDRIVER™ portfolio with the new 24 V dual-channel low side gate driver with an integrated thermal pad.
This is a product release announcement by Infineon Technologies AG. The issuer is solely responsible for its content.
It can be operated with high switching frequencies as well as highest peak output currents and offers an enable function. The gate driver is suitable for applications with higher switching frequencies such as power factor correction and synchronous rectification, as well as a transformer driver or a buffer driver for parallel MOSFET applications or high-current IGBT modules such as EasyPACK™ and EconoPACK™.
The EiceDRIVER 2ED24427N01F provides a symmetrical output stage with 10 A source and sink drive capability with integrated under-voltage lockout (UVLO) protection and logic level enable control. The gate driver is available in a DSO-8 package with a thermally efficient and exposed power pad. With 55 ns propagation delays and 450 mΩ (max) source and sink ON resistance per channel, the driver enables high switching frequencies with reduced switching losses of the power transistors.
The integrated thermal pad offers very low thermal resistance to enable reliable operation at lower temperatures under high current conditions or at higher switching frequencies. 2ED24427N01F is rated for industrial temperature grade operation.
Availability
The EiceDRIVER 2ED24427N01F can be ordered now in an industry-standard DSO-8 (SOIC-8) package with a thermal pad and 2 kV HBM ESD ratings. More information is available at Low Side Drivers.
Molex goes with FUJI NXT series pick-and-place machines
Molex CVS Dabendorf GmbH has decided to use the NXT III placement machine from FUJI EUROPE CORPORATION GmbH.
Inductor current measurement in switched power supplies
Question: How do you measure inductor current?
Sponsored content by CML
Strategic solutions to the current material shortage in the PCB industry
In the past few month’s PCB laminates and base material costs have seen a dramatic rise. The natural consequences of this inflation besides the higher production costs are the unavailability of certain materials paired with longer delivery lead times. A problem like this will destabilize any supply chain, or that’s what you may think.
Fingerprint Cards partners with Mouser Electronics
Swedish biometrics company Fingerprint Cards has entered into a collaboration with global distributor Mouser Electronics.
GF CEO on Intel rumour: “There’s nothing to that story”
In an interview with Jon Fortt from CNBC, GlobalFoundries’ CEO Tom Caulfield sets the record straight regarding the Wall Street Journal’s report of a potential USD 30 billion acquisition by Intel.
Applied Engineering to set up JV operations with Malaysian counterpart
US-based Applied Engineering (AE) will be establishing a joint venture (JV) plant with Malaysian counterpart, QES Manufacturing Sdn. Bhd. (QES) in Batu Kawan Industrial Park, Pulau Pinang later this year.
Sponsored content by Nordson ELECTRONICS SOLUTIONS
There’s a better way to dispense thermal gap filler.
We hear a lot about the advancement, properties, and use of dispensable thermal interface materials (TIM) to keep devices cool. But what about the dispensing process? If you're choosing a dispensable thermal gap filler for your application, download our new guide.
MKS completes its acquisition of Photon Control
MKS Instruments has completed its previously announced acquisition of Photon Control Inc.
Renesas to close its Yamaguchi factory next year
Renesas says that it has decided to consolidate the Yamaguchi Factory (located in Ube, Yamaguchi Prefecture in Japan) of its wholly owned subsidiary, Renesas Semiconductor Manufacturing Co., Ltd. at the end of June 2022.
Intel looking to buy GlobalFoundries for $30 billion?
US chipmaker Intel is reportedly in talks to acquire semiconductor manufacturer GlobalFoundries for some USD 30 billion, reports the Wall Street Journal citing sources familiar with the matter.
A simple way to measure temperature using one GPIO digital interface
Question: How can I make an analog measurement if I only have a single GPIO left on the FPGA/microprocessor for my system?
Sponsored content by Shenzen Kinwong Electronic
The development trend of printed circuit board products and Kinwong's solution
With the rapid development of electronic technology in recent years, printed circuit board (PCB) products are pursuing higher heat dissipation capabilities, with high voltage and high current characteristics, and are developing towards high-density interconnection technology (HDI).
New owner for crystal growth business in Eisenach
Jenoptik has sold its crystal growth business to Hellma Materials, and will continue to focus its business on photonic applications. Hellma Materials takes over all 25 employees, and continues all business activities.
Linear Integrated Systems partners with Digi-Key Electronics
Linear Integrated Systems, a designer and manufacturer of precision, high-performance, small-signal discrete semiconductors, has entered into a new partnership with Digi-Key Electronics.
Conti invests in Israeli industrial sensing start-up Feelit
Continental has acquired a minority stake in the Industry 4.0 start-up Feelit, headquartered in Tel Aviv, Israel. Both companies have agreed not to disclose the amount of the holding.
Skeleton Technologies brings in additional capital
On the first of July, Skeleton Technologies, announced the successful closing of a further EUR 29 million in its Series D financing. The total financing in Round D amounts to EUR 70.4 million.
Fingerprint receives follow-on order for its T-Shape sensor
Swedish biometrics company, Fingerprint Cards has secured an additional volume order for approximately 250,000 units of T-Shape sensor modules from one of the world’s top three card manufacturers.
Minebea Mitsumi acquires Omron’s of 8-inch fab
Minebea Mitsumi’s subsidiary Mitsumi Electric, has entered into an agreement with Omron Corporation for the acquisition of Omron's semiconductor and MEMS fabrication plant in Yasu, Shiga, Japan – as well as its MEMS product development function.
Neonode brings contactless touch to kiosk solution by MiTAC
Swedish Neonode will deliver its Touch Sensor Modules (TSMs) to MiTAC Computing Technology Corp. (MCT) who has developed a contactless touch self-service kiosk solution with a 32 inch display featuring Neonode’s TSMs.
Sourceability ink distribution deal with Nexperia
Electronic component e-commerce marketplace, Sourcengine, says that it is making components from semiconductor manufacturer Nexperia available worldwide.
SK hynix starts mass production of 1anm DRAM using EUV equipment
SK hynix says that it has started mass production of the 8 Gigabit (Gb) LPDDR4 mobile DRAM based on the 1anm, which is the fourth generation of the 10nm process technology this month.
Cirrus Logic to acquire Lion Semiconductor for $335 million
Cirrus Logic has entered into an agreement to acquire California-based Lion Semiconductor for USD 335 million in cash. The acquisition brings IP and products for power applications in smartphones, laptops and other devices and accelerates growth of the company’s high-performance mixed-signal business.
Bootstrapping a low voltage Op Amp to operate with high voltage signals and supplies
Question: Can I bootstrap a low voltage amplifier to get a high voltage buffer?
Sensirion raises its outlook for full-year 2021
The Swiss manufacturer of digital microsensors and systems raises its outlook for financial year 2021 based on strong demand in the first half of the year.
Altix moves to increase its R&D capabilities
Following an increase in manufacturing activity, exposure systems specialist Altix has recently expanded its R&D center located at its French headquarter in Normandy, France.
Micross buys microelectronics business assets of Ultra CEMS
Micross Components, a provider of mission-critical microelectronic components and services, is expanding its Hybrid and assembly business with the acquisition of assets of the microelectronics business from Ultra CEMS, a provider of high reliability hybrid electronics engineered for harsh environments.
Load more news
