© otnaydur dreamstime.com Business | January 22, 2021
NI and Konrad ink agreement to accelerate autonomous vehicle test
NI and Konrad Technologies (KT) have entered into a strategic agreement to develop test systems and solutions for autonomous driving software and hardware validation.
Together, the companies plan to deliver new technologies to help automotive Tier 1 suppliers and OEMs leverage real-world road data and simulation, to help improve vehicle and passenger safety and bring the promise of autonomous driving (AD) to the roads faster. AD requires a complex mix of rapidly evolving technologies such as machine learning, LiDAR and imaging radar to come to life. It involves a challenging process that forces test systems to adapt in tandem to efficiently validate the complex embedded software required to operate autonomous vehicles (AVs) safely in real-world scenarios. By combining NI’s software-connected test solutions with KT’s expertise in system integration and solution delivery for advanced driver assistance systems (ADAS) test, the two companies expect to streamline validation to accelerate the shift to self-driving cars. While the plan is that the test solutions will scale across fleet management, data utilisation and sensor test, initial solutions will focus on high bandwidth data recording and hardware-in-the-loop test systems for testing ADAS and AD software algorithms. “AVs are among the most complex systems being tested today, and no one company can tackle the challenge of getting these vehicles to market alone,” says Chad Chesney, general manager of NI’s Transportation business unit, in a press release. “Our strategic agreement and a seat on the KT board will deepen our long-standing partnership with KT and give customers the system-level capabilities they need to quickly and efficiently test the complex embedded software found within today’s AVs —helping them ensure that test is not a bottleneck but a competitive advantage on the road to autonomy.” “Connecting NI’s open instrumentation to our system integration expertise will allow us to build turnkey solutions that help customers shorten their time to market,” adds Michael Konrad, CEO of Konrad Technologies. “This partnership with NI is expected to provide a consistent tool chain that will help customers rectify multiple challenges efficiently in all stages of the ADAS and AD system product cycle.”
InnovationLab acquires flexible printed battery technology from Evonik German printed electronics specialist, InnovationLab, has acquired the TAeTTOOz printable battery technology from Evonik.
Motorola secures chip supply with GlobalFoundries deal The US semiconductor foundry has entered into a long-term agreement to safeguard the supply of chip solutions for Motorola Solutions' radios, which are widely used by public safety, critical infrastructure and enterprise organisations.
Foxconn and Yageo JV invests in Taiwan MOSFET manufacturer Hon Hai Technology Group (more commonly know as Foxconn) and Yageo Group have – via their joint venture XSemi – invested NTD 2.89 billion (EUR 91.6 million) in Taiwanese MOSFET manufacturer Advanced Power Electronics Corp.
Nexperia and Kyocera to develop GaN automotive power modules Nexperia and Kyocera AVX Components (Salzburg) GmbH, have entered into a partnership with a focus on power components – the companies aims to jointly developing GaN applications for electric vehicles.
Intel invests $700 million in new Oregon mega lab The US chipmaker plans to invest more than USD 700 million for a 200,000 square-foot, research and development mega lab focused on data center technologies and addressing areas such as heating, cooling and water usage.
Obsolescence management cannot be an afterthought “Obsolescence has always existed. However, it usually only becomes really critical for companies when the exception mutates into the norm. And in recent years we have unfortunately experienced this unwanted development not only with semiconductor chips, but increasingly with many other components, materials and raw materials,” says IIOM President and COGD Chairman Dr Wolfgang Heinbach.
Tower record 1Q22 revenues of $421 Million, a 21% YoY Tower Semiconductor reported first quarter 2022 revenue of USD 421 million, an increase of 21% compared to USD 347 million in the first quarter of 2021.
Gallium Semiconductor opens its Nijmegen R&D center Gallium Semiconductor has officially held the grand opening of its European R&D center in a ceremony in Nijmegen, the Netherlands.
Ferrotec to add manufacturing capacity with new plant in Malaysia Ferrotec, a global supplier of materials, components, and precision system solutions, is establishing a new manufacturing facility at Kulim Hi-Tech Park, Kedah, facilitated by the Malaysian Investment Development Authority (MIDA).
Sponsored content by Proval ServiceSince 25 years your partner for SMT stencils and solder pallets. 25 years of experience makes Proval Service not just a supplier but your trustful and grounded partner to support you with SMT stencils and solder pallets. A qualified and unite team can satisfy every customer's need during the whole process.
Skeleton targets the Polish market – teams up with ZPUE Supercapacitor specialist, Skeleton Technologies, and ZPUE, a Polish manufacturer of electrical devices for electrical power distribution utilities, have entered into a commercial agreement to provide energy storage solutions to the Polish market.
Texas Instruments breaks ground $30 billion investment The semiconductor manufacturer has broken ground on its new 300mm semiconductor wafer fabrication plants in Sherman, Texas – an investment set to create as many as create as many as 3,000 jobs.
ERP partners with Flip to fulfill EOL and Obsolete component solutions Flip Electronics has signed a franchised distributor partnership agreement with ERP Power (ERP) to distribute its End-of Life (EOL) semiconductor products.
Foxconn and DNeX build and operate wafer fab in Malaysia Dagang NeXchange Berhad (DNeX) and Foxconn subsidiary Big Innovation Holdings (BIH), plan to set up a joint venture company to build and operate a new 300mm wafer fab in Malaysia.
Sponsored content by FusionManufacturers Reassess their Supply Chains Prevailing obstacles since the COVID-19 Pandemic in 2020 have manufacturers reassessing their supply chain strategies. The following major disruptions that occurred entering 2022 added to existing setbacks, or created new ones altogether:
Imec and semiconductor partners target greener chip manufacturing Nanoelectronics research and innovation center, imec, says that it has managed to pool together stakeholders from the semiconductor value chain – from companies such as Apple and Microsoft, to suppliers, including ASM, Kurita, SCREEN and Tokyo Electron – to participate in its Sustainable Semiconductor Technologies and Systems (SSTS) research program.
SiPearl reaches milestone – 100 employees The European chip designer has exceeded 100 employees across its six sites in France (Maisons-Laffitte, Grenoble, Massy, Sophia Antipolis), Germany (Duisburg) and Spain (Barcelona).
Renesas to convert closed factory to 300mm wafer fab Renesas plans to conduct a JPY 90 billion (EUR 664 million) investment in its Kofu factory, located in Kai City, Yamanashi Prefecture, Japan. The company closed the factory back in October 2014, but now intends to reopen the fab in 2024 as a 300mm wafer fab.
Arrow names Jörg Strughold as president EMEA components Arrow Electronics announces that Jörg Strughold will take over as president of its components business in EMEA. He succeeds Martin Bielesch who has decided to leave the company.
€14 billion to attract semiconductor players to Germany EUR 14 billion in state support is the German governments new strategy to attract more chipmakers to the country.
10 different companies have expressed interest in Toshiba Back in April 2022, Toshiba Corporation announced that it had resolved to solicit proposals on strategic alternatives from potential investors and sponsors. The Japanese company is seeking to enhance its corporate value and has since the announcement been holding discussions with the potential partners.
TDK expands with new MLCC production site in Japan Japanese TDK Corporation says that it will construct a new production building on the premises of the Kitakami Factory – located in Kitakami city, Iwate prefecture, Japan – in order to to enhance the company's MLCC production.
Avnet breaks ground on German expansion In order to better serve its customers’ local and global needs, Avnet is expanding in two locations in Germany. Avnet Embedded broke ground on a new manufacturing site in Eschbach and Avnet EMEA plans to build its third European logistics centre in Bernburg.
Viettel & Qualcomm team up on 5G infrastructure development Viettel Group and Qualcomm Technologies plans to collaborate and develop a next-generation 5G Radio Unit (RU) with massive MIMO capabilities and distributed units (DUs). This focuses on helping to expedite the development and roll-out of 5G network infrastructure and services in Vietnam and globally.
Applied Materials opens Montana expansion – create 200 new jobs The company has opened its latest expansion in Montana, a new semiconductor manufacturing center set to create 200 jobs in the Flathead Valley.
How to easily select the right frequency generation component Question: What is the right frequency generation component for my application?
Bell Semiconductor is suing companies left and right In late April, Bell Semiconductor, a Pennsylvania-based technology and intellectual property licensing company, filed lawsuits against Micron, Infineon, Nvidia and seven other companies alleging infringement of one of its patents.Load more news