© Vitesco Components | June 05, 2020
Vitesco and ROHM cooperate on Silicon Carbide Power Solutions
The powertrain business area of Continental Vitesco Technologies and ROHM Semiconductor have recently signed a development partnership, beginning in June 2020.
Vitesco Technologies will use SiC components to further increase the efficiency of its power electronics for electric vehicles (EV). Through their higher efficiency SiC semiconductors make better use of the electric energy stored in a vehicle battery. Thus, an EV has a longer range, or the battery cost can be reduced without impacting the range. “Energy efficiency is of paramount importance in an electric vehicle. As the traction battery is the only source of energy in the vehicle, any losses caused by power conversion need to be minimized. We are therefore developing a SiC option within our modular power electronics system," says Thomas Stierle, Executive Vice President of the Electrification Technology business unit at Vitesco Technologies. “To get the maximum efficiency out of the power electronics and the e-motor we will use SiC power devices from our preferred partner. ROHM has convinced us of its products” “We are looking forward to the future cooperation with Vitesco Technologies”, says Dr. Kazuhide Ino, Corporate Officer, Director of Power Device business unit at ROHM Co.,Ltd. “We are the leading company in SiC power semiconductors and have achieved a significant technological lead in this field along with the provision of power solutions combined with gate driver ICs. Together with Vitesco Technologies we want to further improve the energy efficiency of the electronic system in EVs to use the full potential of the SiC technology for a sustainable mobility.” Vitesco Technologies is already developing and testing SiC technology in an 800-volt inverter concept to confirm the efficiency potential of the technology. The approach of this program is to look at the complete system of inverter and motor to identify the best combination of device technology and switching strategy. In this context SiC semiconductors – e.g. SiC MOSFETs for 800-volt battery systems – offer more efficient switching in the inverter (higher frequency, steeper switching slopes) and cause fewer harmonic losses in the electric motor. Also, SiC technology is a key enabler for super-fast charging technology that uses 800 volts. “The SiC option is a very promising future part of our modular power electronics system comprising of software, power output stage, and switching strategy”, says Dr. Gerd Rösel, Head of Innovation in the Electrification Technology business unit at Vitesco Technologies. “We will work with ROHM on a 800-volt SiC inverter solution as well as on a 400-volt SiC inverter solution.” Vitesco Technology plans the start of production of the first SiC inverter as of 2025, when the demand for SiC solutions is expected to rise significantly. “In other words, our partnership and development are perfectly on time”, says Rösel.
Nexperia and Kyocera to develop GaN automotive power modules Nexperia and Kyocera AVX Components (Salzburg) GmbH, have entered into a partnership with a focus on power components – the companies aims to jointly developing GaN applications for electric vehicles.
Intel invests $700 million in new Oregon mega lab The US chipmaker plans to invest more than USD 700 million for a 200,000 square-foot, research and development mega lab focused on data center technologies and addressing areas such as heating, cooling and water usage.
Sponsored content by FusionManufacturers Reassess their Supply Chains Prevailing obstacles since the COVID-19 Pandemic in 2020 have manufacturers reassessing their supply chain strategies. The following major disruptions that occurred entering 2022 added to existing setbacks, or created new ones altogether:
Obsolescence management cannot be an afterthought “Obsolescence has always existed. However, it usually only becomes really critical for companies when the exception mutates into the norm. And in recent years we have unfortunately experienced this unwanted development not only with semiconductor chips, but increasingly with many other components, materials and raw materials,” says IIOM President and COGD Chairman Dr Wolfgang Heinbach.
Tower record 1Q22 revenues of $421 Million, a 21% YoY Tower Semiconductor reported first quarter 2022 revenue of USD 421 million, an increase of 21% compared to USD 347 million in the first quarter of 2021.
Gallium Semiconductor opens its Nijmegen R&D center Gallium Semiconductor has officially held the grand opening of its European R&D center in a ceremony in Nijmegen, the Netherlands.
Ferrotec to add manufacturing capacity with new plant in Malaysia Ferrotec, a global supplier of materials, components, and precision system solutions, is establishing a new manufacturing facility at Kulim Hi-Tech Park, Kedah, facilitated by the Malaysian Investment Development Authority (MIDA).
Skeleton targets the Polish market – teams up with ZPUE Supercapacitor specialist, Skeleton Technologies, and ZPUE, a Polish manufacturer of electrical devices for electrical power distribution utilities, have entered into a commercial agreement to provide energy storage solutions to the Polish market.
Texas Instruments breaks ground $30 billion investment The semiconductor manufacturer has broken ground on its new 300mm semiconductor wafer fabrication plants in Sherman, Texas – an investment set to create as many as create as many as 3,000 jobs.
ERP partners with Flip to fulfill EOL and Obsolete component solutions Flip Electronics has signed a franchised distributor partnership agreement with ERP Power (ERP) to distribute its End-of Life (EOL) semiconductor products.
Foxconn and DNeX build and operate wafer fab in Malaysia Dagang NeXchange Berhad (DNeX) and Foxconn subsidiary Big Innovation Holdings (BIH), plan to set up a joint venture company to build and operate a new 300mm wafer fab in Malaysia.
Imec and semiconductor partners target greener chip manufacturing Nanoelectronics research and innovation center, imec, says that it has managed to pool together stakeholders from the semiconductor value chain – from companies such as Apple and Microsoft, to suppliers, including ASM, Kurita, SCREEN and Tokyo Electron – to participate in its Sustainable Semiconductor Technologies and Systems (SSTS) research program.
SiPearl reaches milestone – 100 employees The European chip designer has exceeded 100 employees across its six sites in France (Maisons-Laffitte, Grenoble, Massy, Sophia Antipolis), Germany (Duisburg) and Spain (Barcelona).
Renesas to convert closed factory to 300mm wafer fab Renesas plans to conduct a JPY 90 billion (EUR 664 million) investment in its Kofu factory, located in Kai City, Yamanashi Prefecture, Japan. The company closed the factory back in October 2014, but now intends to reopen the fab in 2024 as a 300mm wafer fab.
Arrow names Jörg Strughold as president EMEA components Arrow Electronics announces that Jörg Strughold will take over as president of its components business in EMEA. He succeeds Martin Bielesch who has decided to leave the company.
Sponsored content by Proval ServiceSince 25 years your partner for SMT stencils and solder pallets. 25 years of experience makes Proval Service not just a supplier but your trustful and grounded partner to support you with SMT stencils and solder pallets. A qualified and unite team can satisfy every customer's need during the whole process.
€14 billion to attract semiconductor players to Germany EUR 14 billion in state support is the German governments new strategy to attract more chipmakers to the country.
10 different companies have expressed interest in Toshiba Back in April 2022, Toshiba Corporation announced that it had resolved to solicit proposals on strategic alternatives from potential investors and sponsors. The Japanese company is seeking to enhance its corporate value and has since the announcement been holding discussions with the potential partners.
TDK expands with new MLCC production site in Japan Japanese TDK Corporation says that it will construct a new production building on the premises of the Kitakami Factory – located in Kitakami city, Iwate prefecture, Japan – in order to to enhance the company's MLCC production.
Avnet breaks ground on German expansion In order to better serve its customers’ local and global needs, Avnet is expanding in two locations in Germany. Avnet Embedded broke ground on a new manufacturing site in Eschbach and Avnet EMEA plans to build its third European logistics centre in Bernburg.
Viettel & Qualcomm team up on 5G infrastructure development Viettel Group and Qualcomm Technologies plans to collaborate and develop a next-generation 5G Radio Unit (RU) with massive MIMO capabilities and distributed units (DUs). This focuses on helping to expedite the development and roll-out of 5G network infrastructure and services in Vietnam and globally.
Applied Materials opens Montana expansion – create 200 new jobs The company has opened its latest expansion in Montana, a new semiconductor manufacturing center set to create 200 jobs in the Flathead Valley.
How to easily select the right frequency generation component Question: What is the right frequency generation component for my application?
Bell Semiconductor is suing companies left and right In late April, Bell Semiconductor, a Pennsylvania-based technology and intellectual property licensing company, filed lawsuits against Micron, Infineon, Nvidia and seven other companies alleging infringement of one of its patents.
Can pre-owned equipment be the way out of the shortage? The global semiconductor supply chain remains under immense pressure. However, major investments are being made to increase capacity and fortify the supply chain for the future – but we wont feel the effect of these investments for years. Adding to the issue, there is not enough chips for the chipmaking machines.
CN Rood takes over ABtronix Test and measurement equipment supplier, CN Rood, expands its position in both Scandinavia and the Belelux via the acquisition of ABtronix, professional T&M equipment.
STMicro supplies SiC tech to Semikron for EV power modules STMicroelectronics has revealed it is supplying SiC technology for the eMPack electric-vehicle power modules from Semikron.
Henkel opens new application center in Silicon Valley Henkel is opening its Application Center in Santa Clara, California designed to support product development for the company's high-tech customers in the Silicon Valley region. The application center will help expedite proof-of-concept initiatives for electronics advances.Load more news