© ngweikeong dreamstime.com Components | August 20, 2015
Quantum dot - future for LED?
Advances at Oregon State University in manufacturing technology for “quantum dots” may soon lead to a new generation of LED lighting.
Advances at Oregon State University in manufacturing technology for “quantum dots” may soon lead to a new generation of LED lighting that produces a more user-friendly white light, while using less toxic materials and low-cost manufacturing processes that take advantage of simple microwave heating. The same technology may also be widely incorporated into improved lighting displays, computer screens, smart phones, televisions and other systems. A key to the advances, which have been published in the Journal of Nanoparticle Research, is use of both a “continuous flow” chemical reactor, and microwave heating technology that’s conceptually similar to the ovens that are part of almost every modern kitchen. The continuous flow system is fast, cheap, energy efficient and will cut manufacturing costs. And the microwave heating technology will address a problem that so far has held back wider use of these systems, which is precise control of heat needed during the process. The microwave approach will translate into development of nanoparticles that are exactly the right size, shape and composition. “There are a variety of products and technologies that quantum dots can be applied to, but for mass consumer use, possibly the most important is improved LED lighting,” said Greg Herman, an associate professor and chemical engineer in the OSU College of Engineering. “We may finally be able to produce low cost, energy efficient LED lighting with the soft quality of white light that people really want,” Herman said. “At the same time, this technology will use nontoxic materials and dramatically reduce the waste of the materials that are used, which translates to lower cost and environmental protection.” Some of the best existing LED lighting now being produced at industrial levels, Herman said, uses cadmium, which is highly toxic. The system currently being tested and developed at OSU is based on copper indium diselenide, a much more benign material with high energy conversion efficiency. Quantum dots are nanoparticles that can be used to emit light, and by precisely controlling the size of the particle, the color of the light can be controlled. They’ve been used for some time but can be expensive and lack optimal color control. The manufacturing techniques being developed at OSU, which should be able to scale up to large volumes for low-cost commercial applications, will provide new ways to offer the precision needed for better color control. Oher applications of these systems are also possible. Cell phones and portable electronic devices might use less power and last much longer on a charge. OSU is already working with the private sector to help develop some uses of this technology, and more may evolve. The research has been supported by Oregon BEST and the National Science Foundation Center for Sustainable Materials Chemistry.
ASML ships first-generation multibeam inspection system ‘eScan1000’ ASML Holding NV says that it has completed system integration and testing of its first-generation HMI multibeam inspection (MBI) system for 5 nm nodes and beyond.
Cognex takes measures to counter deteriorating market conditions Machine vision technology provider, Cognex Corporation, says it is taking significant steps to reducing expenses due to deteriorating market conditions and to position the company for growth when conditions improve.
Verkotan selects PWC technology from Rohde & Schwarz Test and measurement specialist Rohde & Schwarz has recently introduced the R&S PWC200, the first plane wave converter (PWC) on the market. Verkotan is the first independent test house to choose this technology to test 5G NR FR1 base stations over-the-air (OTA).
Kurt Sievers takes the helm at NXP At its annual general meeting of shareholders, the appointment of Kurt Sievers as the company’s next CEO was overwhelmingly approved.
Excelitas’ Qioptiq subsidiary expands with new plant Excelitas Technologies, a company delivering photonic solutions, sats that its Qioptiq subsidiary held a ground-breaking ceremony last week to mark the beginning of construction for a new factory in Göttingen, Germany.
Farnell adds Sorensen power supplies to its roster Distributor Farnell announces that it has added Sorensen, the premier DC programmable power supply brand from Ametek, to its range of power supplies.
Infineon raises EUR 1 billion following successful share placement Infineon informs that the company placed 55 million new shares, following an accelerated bookbuilding process with institutional investors, under the exclusion of subscription rights. The shares were placed at a price of EUR19.30 per share, meaning that the company managed to raise EUR 1.06 billion.
Skeleton Technologies strengthens management with new COO Skeleton Technologies has appointed Ants Vill, former Vice President of Product, as Chief Operating Officer.
SiPearl chooses Germany for its first international operational subsidiary SiPearl, a designer of the microprocessor for the European exascale supercomputer, is opening its first international subsidiary in Duisburg, in the Ruhr region, Germany, in order to build closer connections with its German partners and future clients.
DELO reports increased revenues despite current pandemic DELO closed the financial year that ended on March 31 with a turnover of EUR 163 million. This is an increase of almost 5% compared to the previous year (EUR 156 million).
China falls far short of its "Made-in-China 2025" goal IC production in China represented 15.7% of its $125 billion IC market in 2019, up only slightly from 15.1% five years earlier in 2014. IC Insights forecasts that this share will increase by 5.0 percentage points to 20.7% in 2024 (one percentage point per year on average).
COVID-19 highlights the gravity of the secondary market for SME Cha Jin-Seok, Chief Financial Officer of SK Hynix, said it best in the company’s Q1 earnings call, “Because of a never experienced pandemic, even basic business activities such as maintaining normal operations and predicting future demand have become challenging tasks.”
GlobalFoundries to implement ITAR at US manufacturing facility GlobalFoundries plans to implement export control security measures at its most advanced manufacturing facility, Fab 8, in Malta, New York.
Rebound Electronics expands in Asia The independent supplier of electronic components says it is investing to increase its market coverage in Asia with the opening of several new offices and setting up a customer service & telesales centre.
Samsung expands foundry capacity with new production line Samsung Electronics says that it plans to boost its foundry capacity at the company's new production line in Pyeongtaek, Korea, to meet growing global demand for extreme ultraviolet (EUV) solutions.
Super Dry Totech expands Long Term Storage Solutions offering The most recent development for Super Dry Totech, is the acquisition of a new building to expand on capacity & to minimise risk by assuring continuity should a disrupting incident occur in one of the facilities.
Ynvisible acquires electrochromic display company rdot Printed electronics specialist, Ynvisible Interactive, announces that it will acquire the printed electrochromic displays business of rdot AB of Gothenburg, Sweden.Load more news
- COVID-19 highlights the gravity of the secondary market for SME
- Rolls-Royce takes heavy hit from COVID-19 – reduces workforce by 9000
- China falls far short of its "Made-in-China 2025" goal
- GlobalFoundries to implement ITAR at US manufacturing facility
- Data Link Solutions to provide MIDS cabinet terminals to US Navy