© costasz dreamstime.com Components | July 01, 2013
Nokia 105 cellphone proves profitable
Is it possible to sell a mobile phone at a price of $20.00 and still make a profit?
With its ultra-low-cost handset (ULCH) model designated as the 105, Nokia has shown how it can be done: by sticking to a limited set of features and employing a highly integrated design. The Nokia 105 yields a margin of less than 30 percent, strictly based on hardware and manufacturing costs and retail pricing, according to information and analytics provider IHS. The Nokia 105 carries a bill of materials (BOM) of $13.50. When the manufacturing cost is added in, the cost rises to $14.20. At a suggested retail price of $20.00—a new low for a ULCH cellphone—this gives the 105 an implied hardware and manufacturing margin of 29 percent, which suggests modest a profit margin for the Nokia 105. “About eight years ago, the IHS Teardown Analysis Team dissected the iconic Nokia 1110 cellphone, a hugely popular device that defined the ULCH segment and had very similar features as the new 105,” said Wing Lam, principal analyst for IHS. “We determined that the 1110’s BOM was nearly three times larger than the 105’s—even when accounting for the black-and-white display used on the old model. Therein lies the 105’s secret: By keeping features the same for nearly a decade, the Nokia 105 can integrate nearly all system functions into a single chip, dramatically reducing the cost to produce a cellphone. The 105 allows Nokia to participate in the ULCH market targeting specific regions and consumers.” Targeting the ultra-low-end allows Nokia to approach the 105’s design in a manner that is the polar opposite of the strategy commonly used in the mid to high-end cellphone market, i.e., adding features to products each year, while maintaining the same BOM costs and pricing. The no-frills phone The 105 extends Nokia’s 1100 line, targeting emerging markets including Africa, India, and Latin America. The phone supports long talk and standby times, which are valuable in regions with poor power grids or frequent shortages of electricity. The features of the phone are very simple, with just talk and text capabilities. “While much attention has been lavished on smartphones, the market for simple handsets remains very important to Nokia,” said Wayne Lam, senior analyst for wireless communications at IHS. “Non-smartphones, including ULCH cellphones like the 105, accounted for 90 percent of Nokia's shipments in 2012.” Phone on a chip In terms of design, the 105 owes its low costs to a single, highly integrated chip: Intel Corp.’s PMB7900. The PMB7900 combines baseband and the RF transceiver enabling GSM/GPRS functions. With so much functionality packed into a single device, the 105 contains only three integrated circuits in total—compared to six for the 1110. “This is the fruit of nearly a decade’s worth of integration,” Wing Lam said. “By riding Moore’s law and holding the line on features, Nokia has gone from six discrete integrated circuits (ICs) to just one core device plus two other ICs.” The other two ICs in the 105 are the SKY77580 transmit module from Skyworks as well as a NOR flash device from Micron. Collectively, these three ICs dominate the baseband/RF transceiver/memory subsystem and, when combined with supporting passive components, carry a cost of $5.25, representing 39 percent of the 105’s total BOM. The cost of color Despite support for color, the 105’s display carries a cost of just $2.25, or 17 percent of the total BOM of the phone. Nokia has kept this cost to a minimum by employing a TFT-LCD display with a low resolution of 128 by 128. This display technology is very mature and is available in high volume. In the individual 105 model examined by IHS, the display was made by China’s Tianma Microelectronics. But there are multiple suppliers of this component, with competition among them further contributing to keeping the price down.
ASML ships first-generation multibeam inspection system ‘eScan1000’ ASML Holding NV says that it has completed system integration and testing of its first-generation HMI multibeam inspection (MBI) system for 5 nm nodes and beyond.
Cognex takes measures to counter deteriorating market conditions Machine vision technology provider, Cognex Corporation, says it is taking significant steps to reducing expenses due to deteriorating market conditions and to position the company for growth when conditions improve.
Verkotan selects PWC technology from Rohde & Schwarz Test and measurement specialist Rohde & Schwarz has recently introduced the R&S PWC200, the first plane wave converter (PWC) on the market. Verkotan is the first independent test house to choose this technology to test 5G NR FR1 base stations over-the-air (OTA).
Kurt Sievers takes the helm at NXP At its annual general meeting of shareholders, the appointment of Kurt Sievers as the company’s next CEO was overwhelmingly approved.
Excelitas’ Qioptiq subsidiary expands with new plant Excelitas Technologies, a company delivering photonic solutions, sats that its Qioptiq subsidiary held a ground-breaking ceremony last week to mark the beginning of construction for a new factory in Göttingen, Germany.
Farnell adds Sorensen power supplies to its roster Distributor Farnell announces that it has added Sorensen, the premier DC programmable power supply brand from Ametek, to its range of power supplies.
Infineon raises EUR 1 billion following successful share placement Infineon informs that the company placed 55 million new shares, following an accelerated bookbuilding process with institutional investors, under the exclusion of subscription rights. The shares were placed at a price of EUR19.30 per share, meaning that the company managed to raise EUR 1.06 billion.
Skeleton Technologies strengthens management with new COO Skeleton Technologies has appointed Ants Vill, former Vice President of Product, as Chief Operating Officer.
SiPearl chooses Germany for its first international operational subsidiary SiPearl, a designer of the microprocessor for the European exascale supercomputer, is opening its first international subsidiary in Duisburg, in the Ruhr region, Germany, in order to build closer connections with its German partners and future clients.
DELO reports increased revenues despite current pandemic DELO closed the financial year that ended on March 31 with a turnover of EUR 163 million. This is an increase of almost 5% compared to the previous year (EUR 156 million).
China falls far short of its "Made-in-China 2025" goal IC production in China represented 15.7% of its $125 billion IC market in 2019, up only slightly from 15.1% five years earlier in 2014. IC Insights forecasts that this share will increase by 5.0 percentage points to 20.7% in 2024 (one percentage point per year on average).
COVID-19 highlights the gravity of the secondary market for SME Cha Jin-Seok, Chief Financial Officer of SK Hynix, said it best in the company’s Q1 earnings call, “Because of a never experienced pandemic, even basic business activities such as maintaining normal operations and predicting future demand have become challenging tasks.”
GlobalFoundries to implement ITAR at US manufacturing facility GlobalFoundries plans to implement export control security measures at its most advanced manufacturing facility, Fab 8, in Malta, New York.
Rebound Electronics expands in Asia The independent supplier of electronic components says it is investing to increase its market coverage in Asia with the opening of several new offices and setting up a customer service & telesales centre.
Samsung expands foundry capacity with new production line Samsung Electronics says that it plans to boost its foundry capacity at the company's new production line in Pyeongtaek, Korea, to meet growing global demand for extreme ultraviolet (EUV) solutions.
Super Dry Totech expands Long Term Storage Solutions offering The most recent development for Super Dry Totech, is the acquisition of a new building to expand on capacity & to minimise risk by assuring continuity should a disrupting incident occur in one of the facilities.
Ynvisible acquires electrochromic display company rdot Printed electronics specialist, Ynvisible Interactive, announces that it will acquire the printed electrochromic displays business of rdot AB of Gothenburg, Sweden.Load more news
- COVID-19 highlights the gravity of the secondary market for SME
- Rolls-Royce takes heavy hit from COVID-19 – reduces workforce by 9000
- China falls far short of its "Made-in-China 2025" goal
- Data Link Solutions to provide MIDS cabinet terminals to US Navy
- GlobalFoundries to implement ITAR at US manufacturing facility