Components | May 18, 2011
1H’May mainstream NAND Flash contract price declined
Since most NAND Flash end-applications such as memory card, UFD & system products entered off season in May, most end-product customers became conservative toward procurement while inventory level is already high due to the earlier speculative buying right after the Japan earthquake in March.
Thus, 1H’May mainstream NAND Flash contract price reflects a roughly 2-10% decline. The NAND Flash market will be influenced by the following factors: - Off-season continues in June, - Demand in system products such as tablet PC and smart phone in 2Q/11 are mainly from the few major players, - The supply of raw materials used in producing NAND Flash was not affected by the Japan earthquake. The production plans of 2Q/11 remains unaffected while the 2xnm migration was further adapted in 2Q/11 and boosted the NAND Flash bit supply, - NAND Flash makers might adopt aggressive pricing strategy to lower the inventory level in June while approaching the end of the quarter, - NAND Flash contract price sharply went up after the Japan earthquake in March. Lowering the NAND Flash price, before the system product makers launch new models in late 3Q/11 will encourage a higher capacity of NAND Flash storage embedded. - Global economy recovery faces some uncertain factors in 2011. After considering all the factors, DRAMeXchange expects NAND Flash to be oversupplied in May. Second half of 2Q/11 NAND Flash contract price will change from the previously steady price and start to decline.
ASML ships first-generation multibeam inspection system ‘eScan1000’ ASML Holding NV says that it has completed system integration and testing of its first-generation HMI multibeam inspection (MBI) system for 5 nm nodes and beyond.
Cognex takes measures to counter deteriorating market conditions Machine vision technology provider, Cognex Corporation, says it is taking significant steps to reducing expenses due to deteriorating market conditions and to position the company for growth when conditions improve.
Verkotan selects PWC technology from Rohde & Schwarz Test and measurement specialist Rohde & Schwarz has recently introduced the R&S PWC200, the first plane wave converter (PWC) on the market. Verkotan is the first independent test house to choose this technology to test 5G NR FR1 base stations over-the-air (OTA).
Kurt Sievers takes the helm at NXP At its annual general meeting of shareholders, the appointment of Kurt Sievers as the company’s next CEO was overwhelmingly approved.
Excelitas’ Qioptiq subsidiary expands with new plant Excelitas Technologies, a company delivering photonic solutions, sats that its Qioptiq subsidiary held a ground-breaking ceremony last week to mark the beginning of construction for a new factory in Göttingen, Germany.
Farnell adds Sorensen power supplies to its roster Distributor Farnell announces that it has added Sorensen, the premier DC programmable power supply brand from Ametek, to its range of power supplies.
Infineon raises EUR 1 billion following successful share placement Infineon informs that the company placed 55 million new shares, following an accelerated bookbuilding process with institutional investors, under the exclusion of subscription rights. The shares were placed at a price of EUR19.30 per share, meaning that the company managed to raise EUR 1.06 billion.
Skeleton Technologies strengthens management with new COO Skeleton Technologies has appointed Ants Vill, former Vice President of Product, as Chief Operating Officer.
SiPearl chooses Germany for its first international operational subsidiary SiPearl, a designer of the microprocessor for the European exascale supercomputer, is opening its first international subsidiary in Duisburg, in the Ruhr region, Germany, in order to build closer connections with its German partners and future clients.
DELO reports increased revenues despite current pandemic DELO closed the financial year that ended on March 31 with a turnover of EUR 163 million. This is an increase of almost 5% compared to the previous year (EUR 156 million).
China falls far short of its "Made-in-China 2025" goal IC production in China represented 15.7% of its $125 billion IC market in 2019, up only slightly from 15.1% five years earlier in 2014. IC Insights forecasts that this share will increase by 5.0 percentage points to 20.7% in 2024 (one percentage point per year on average).
COVID-19 highlights the gravity of the secondary market for SME Cha Jin-Seok, Chief Financial Officer of SK Hynix, said it best in the company’s Q1 earnings call, “Because of a never experienced pandemic, even basic business activities such as maintaining normal operations and predicting future demand have become challenging tasks.”
GlobalFoundries to implement ITAR at US manufacturing facility GlobalFoundries plans to implement export control security measures at its most advanced manufacturing facility, Fab 8, in Malta, New York.
Rebound Electronics expands in Asia The independent supplier of electronic components says it is investing to increase its market coverage in Asia with the opening of several new offices and setting up a customer service & telesales centre.
Samsung expands foundry capacity with new production line Samsung Electronics says that it plans to boost its foundry capacity at the company's new production line in Pyeongtaek, Korea, to meet growing global demand for extreme ultraviolet (EUV) solutions.
Super Dry Totech expands Long Term Storage Solutions offering The most recent development for Super Dry Totech, is the acquisition of a new building to expand on capacity & to minimise risk by assuring continuity should a disrupting incident occur in one of the facilities.
Ynvisible acquires electrochromic display company rdot Printed electronics specialist, Ynvisible Interactive, announces that it will acquire the printed electrochromic displays business of rdot AB of Gothenburg, Sweden.Load more news
- COVID-19 highlights the gravity of the secondary market for SME
- Rolls-Royce takes heavy hit from COVID-19 – reduces workforce by 9000
- China falls far short of its "Made-in-China 2025" goal
- Data Link Solutions to provide MIDS cabinet terminals to US Navy
- GlobalFoundries to implement ITAR at US manufacturing facility