Ad
Ad
SMT & Inspection | October 06, 2006

JTAG Technologies to showcase<br>ProVision dot6 Test at Electronica

IEEE standard 1149.6 is an important extension to the original 1149.1 boundary-scan specification. The extension overcomes test limitations associated with high-speed digital interfaces such as LVDS and ac-coupled networks. Prior to "dot6," testing of such networks could produce erroneous pass/fail indications.
JTAG ProVision from JTAG Technologies automatically produces an exhaustive test of these types of interfaces, based upon the netlist of the circuit and the BSDLs and model files for the chips in the design. The ProVision dot6 test produces a diagnostic fault report which pinpoints the cause of the failure for any of the 30 possible fault types, including multiple faults. The fault report can also be analyzed by JTAG Visualizer, the schematic and layout viewer from JTAG Technologies, and is presented to the engineer as a color-highlighted graphical output.

Comments

Please note the following: Critical comments are allowed and even encouraged. Discussions are welcome. Verbal abuse, insults and racist / homophobic remarks are not. Such comments will be removed.
Further details can be found here.
Ad
Ad
Load more news
July 18 2018 5:55 pm V10.0.0-1