Consumer electronics will feel the brunt of the weakening stay-at-home economy
According to TrendForce, the consumer electronics market will feel the brunt of the weakening stay-at-home economy, the pandemic in China, international tensions, and rising inflation in 1H22.
Coupled with the traditional off-season, demand for relevant applications such as PCs, laptops, TVs, and smartphones has cooled significantly and downstream customers have successively downgraded their shipment targets for the year, while demand for automotive, Internet of Things, communications, and servers products remain good. At the same time, the supply chain will build higher inventories in general to mitigate the risk of material shortages due to transportation impediments induced by the spread of the pandemic and the ongoing war between Russia and Ukraine.
Due to the prolonged lead-time of semiconductor equipment and limited new capacity in 1Q22, the overall foundry capacity utilization rate remains fully loaded, in particular, component mismatch issues continue for parts produced at mature nodes (1Xnm~180nm). Looking forward to the second quarter, although growth in global wafer production capacity remains limited, due to weak demand for end products, continuing international tension, and China's forced lockdowns and supervision due to the recent spread of the pandemic, there is an opportunity for the supply chain to obtain a more adequate supply of wafers that were previously squeezed by production capacity.
The overall supply of key server materials improved slightly in 1Q22. In addition, due to increasing orders from ultra-large data centers, the general supply cycle of NetCom chips such as LAN IC/chip remains as long as approximately 40 weeks but the demand gap can be bridged by instituting urgent order fees, mitigating actual impact. As the aforementioned situation eases, additional orders for ODM motherboard production are moving briskly, prompting continued stocking of FPGAs and PMICs materials. NetCom chips are also overstocked and the overall market has a reached a "rich get richer" mindset. Material shortages at second-tier ODMs still stifle the production of motherboards for a small number of customers but does not affect the overall server market supply. With improvements in material supply, server shipments will increase significantly in 2Q22, growing an estimated 15.8% QoQ to 3.6 million units.
Affected by sluggish seasonal demand, the Russian-Ukrainian war, and rising inflation, market demand has cooled. Thus, material delivery issues in the supply chain have eased compared to 2H21. Although there is still a shortage of certain components, most of these shortages are concentrated in mid/low-end smartphone products. The lead time for 4G and low-end 5G SoCs is approximately 30 to 40 weeks, which is limited by production capacity planning. Since last year, the demand of the mid/low-end mobile phone market has not been met. This is followed by A+G sensors with a lead time of approximately 32~36 weeks and OLED DDIC and Touch IC with a lead time of 20~22 weeks. The production volume of smartphones in 2Q22 will be affected by the interaction of the aforementioned factors with a forecast production volume of 323 million units, or only 6% QoQ, which is lower than the performance of previous years.
Also affected by weakening end market demand, discounting client SSDs that are no longer oversupplied, Type C IC, WiFi, and PMIC all currently boast long lead times, with Type C IC the lengthiest at 20~25 weeks. However, compared with TrendForce’s assessment at the beginning of this year, the delivery cycle has not grown longer, so the lead time of these three types of products is expected to improve by the end of 2Q22. As supply chain backlog continues to improve, shipments of notebook computers (including Chromebooks) is expected to reach approximately 55.1 million units in 2Q22, down 0.7% QoQ.
MLCC Passive Components
From the perspective of other key components, taking MLCC as an example, demand for major consumer electronic products such as mobile phones, laptops, tablets, and TVs declined significantly in 1Q22, resulting in high consumer product specification MLCC inventory levels held by original suppliers and channel agents and this situation may continue into 2Q22. At present, the stocking momentum for automotive and industrial MLCCs has steadily increased, while consumer specification products have yet to escape the pattern of oversupply. In 2Q22, the MLCC market has the opportunity to alleviate its component mismatch issues through gradually increased production capacity and automotive and server ICs supplied by semiconductor IDM companies, driving stocking momentum at automotive power, server, fast charging, and charging/energy storage equipment OEMs. Vehicle and industrial MLCCs have the opportunity to become primary growth drivers in 2Q22 with Murata, TDK, Taiyu and Yageo as the primary beneficiaries. Consumer specification products, which account for the bulk of MLCC production from suppliers in Taiwan, South Korea, and China, may face continued market demand weakness in 2Q22 due to a slowdown in demand for mobile phones and laptops and continuing inventory adjustment by branded companies and ODMs.
Looking forward to 2Q22, not including servers, demand for end products related to the consumer category remains weak. Components that were originally oversupplied will face more severe price tests due to the imbalance between supply and demand. In terms of materials in serious short supply, more output will be transferred to products with strong demand through the deployment of internal production capacity. TrendForce believes that from the changes in PC market conditions, it can be seen in rapid changes in demand, purchasing behavior has quickly switched from the former over-ordering strategy to actively cutting orders, inducing supply chains to buck the seasonal trends of previous years. Due to the accelerated recent spread of Omicron in China and under the country’s dynamic zero-COVID policy, mandatory and sudden lockdown and control measures may cause local manufacturers to face multiple and complex supply chain problems, which will be detrimental to market performance.
For more information visit TrendForce