Electronics Production | September 13, 2006
Tiny ion pump sets new standard<br>in cooling hot computer microchips
University of Washington researchers have succeeded in building a cooling device tiny enough to fit on a computer chip that could work reliably and efficiently with the smallest microelectronic components.
The device, which uses an electrical charge to create a cooling air jet right at the surface of the chip, could be critical to advancing computer technology because future chips will be smaller, more tightly packed and are likely to run hotter than today's chips. As a result, tomorrow's computers will need cooling systems far more efficient than the fans and heat sinks that are used today. "With this pump, we are able to integrate the entire cooling system right onto a chip," said Alexander Mamishev, associate professor of electrical engineering and principal investigator on the project. "That allows for cooling in applications and spaces where it just wasn't realistic to do before." The micro-pump also represents the first time that anyone has built a working device at this scale that uses this method, Mamishev added. "The idea has been around for several years," he said. "But until now it hasn't been physically demonstrated in terms of a working prototype." Mamishev and doctoral students Nels Jewell-Larsen and Chi-Peng Hsu presented a paper on the device at the American Institute of Aeronautics and Astronautics/American Society of Mechanical Engineers Joint Thermophysics and Heat Transfer Conference earlier this summer and are scheduled to give an additional presentation this fall. In addition, the UW researchers and collaborators with Kronos Advanced Technologies and Intel Corp. have been awarded a $100,000 grant from the Seattle-based Washington Technology Center for the second phase of the project. The device utilizes an electrical field to accelerate air to speeds previously possible only with the use of traditional blowers. Trial runs showed that the prototype device significantly cooled an actively heated surface on just 0.6 watts of power. The prototype cooling chip contains two basic components: an emitter and a collector. The emitter has a tip radius of about 1 micron -- so small that up to 300 tips could fit across a human hair. The tip creates air ions, electrically charged particles that are propelled in an electric field to the collector surface. As the ions travel from tip to collector, they create an air jet that blows across the chip, taking heat with it. The volume of the airflow can be controlled by varying the voltage between the emitter and collector. The findings are significant for future computing applications, which will incorporate denser circuitry to boost computing power. More circuitry equals more heat and a greater need for innovative cooling technologies that go beyond bulky, noisy and relatively inefficient fans and heat sinks -- metal plates with fins to increase surface area and help dissipate heat. Circulating liquids among the chips to draw away heat is one possibility, but computer chips and liquids don't mix well; the cost of a cooling system breakdown could be steep. "Our goal is to develop advanced cooling systems that can be built right onto next-generation microchips," Jewell-Larsen said. "Such systems could handle both the increased heat generation of future chips and the fact that they would be distributed throughout a computer or electronic device." Added Mamishev: "It promises a new dimension in thermal management strategy and design." A few challenges remain, he added. One involves developing the mathematical models to control vast systems of chips with built-in coolers. "These pumps end up being very complicated, dynamic systems," Mamishev said. "You have flow on a microscale, electrohydrodynamic forces, electrical fields and moving charges." A second challenge is identifying the best materials to use in building devices that are high-performing and durable. "There is evidence that nanotubes and other nano-structures could give significant performance gains," Jewell-Larsen said. "Those are avenues we are currently pursuing."
A more sustainable approach to semiconductor manufacturing Reuse; that is the key to driving environmental sustainability in global semiconductor manufacturing, says Steven Zhou, CEO of Moov Technologies.
Teslas German venture comes to a halt following court order A court in Germany has ordered the US electric carmaker to stop clearing the forest at its future location outside Berlin.
Marposs expands with acquisition of Stil Precision metrology equipment supplier Marposs has acquired STIL S.A.S., a French company specializing in research, development, production and sales of optical measurement instruments.
Z-AXIS shares good news from 2019 Electronics design and CMS provider Z-AXIS Inc. released 2019 data showing showing robust revenue growth as well as an expansion to its workforce.
Fluidra reaches a deal to acquire Fabtronics Fluidra, a company within the pool and wellness equipment industry, has acquired Australian electronics manufacturer Fabtronics to strengthen its R&D capabilities and to incorporate complete, efficient and cost-effective electronics design and manufacturing solutions.
Garz & Fricke acquires Keith & Koep Hamburg-based Garz & Fricke Group has acquired Keith & Koep GmbH, located in Wuppertal, Germany. With this move, a new powerhouse for ARM-based embedded technologies in Europe has been formed.
ABB to close Hungarian plant – 1’000 jobs lost The power and automation company will close its production facility in Ozd, in northeastern Hungary, by the end of the year.
AT&S' plant Chongqing II back in operation Austrian PCB manufacturer, AT&S, announces that the Plant II at its Chinese location in Chongqing will resume operations.
Arçelik A.Ş files IP lawsuit against LG Arçelik A.S, owners of the Beko and Grundig brands, filed a lawsuit against LG Electronics and its subsidiaries in Germany and France for patent infringement in relation to the unlicensed implementation of the company’s direct drive technology in LG Electronics’ “6 Motion” washing machines.
Seagate unifying workforce at green Fremont site Data storage and management solutions provider Seagate Technology plc is consolidating its San Francisco Bay Area workforce by relocating the company’s Cupertino operations to its existing sustainable Fremont facility.
Coronavirus afflicts more electronic supply chains With the epidemic arriving at dawn of 5G’s mainstream deployment phase, the coronavirus has the potential to disrupt the progress of the next-generation wireless standard, as the crisis slows or threatens to slow the production of key smartphone components, including displays and semiconductors, according to Omdia.
Solid financial improvements for Kitron EMS provider Kitron could show off solid financial improvements, both for the fourth quarter and full year 2019.
Zollner resumes operations in China The German EMS provider Zollner says that its plant in Taicang is reopened. Work continues under strict safety conditions and not to the full extent.
Step-by-Step: Foxconn makes progress in WI Next construction phases of vertical construction, including steel placement, have commenced at Foxconn’s 296,000-square-foot Smart Manufacturing Center at the Wisconn Valley Science and Technology Park (WVSTP).
Eaton boosts offerings with acquisition of PDI Inc. Power management company Eaton has struck a deal to purchase Virginia-based Power Distribution Inc. (PDI), a supplier of mission critical power distribution, static switching, and power monitoring equipment.
BASF to set up cathode active material production in Germany BASF is planning a new battery materials production site in Schwarzheide, Germany, as part of its multi-step investment plan to support the European electric vehicle (EV) value chain.
Shipment from China to GPV sites worldwide has restarted Some of GPV's most important suppliers in China are back in operation which means that important shipment to GPV sites worldwide has restarted. However, not all supplies might be complete, the company says.
Orbit One expands with new test team in Poland The Swedish EMS provider is launching another test team within the group.
Volvo and Geely considers a combined company Volvo Car AB and Geely Automobile Holdings Limited are considering combining their businesses to create a strong global group, which would accelerate financial and technological synergies between the two companies.
Cepton nails major funding from Koito Lidar technology specialist Cepton Technologies Inc. has secured USD 50 million in Series C funding from Koito Manufacturing Co. Ltd., a Tier 1 provider of automotive lighting systems.
RoboSense obtains IATF 16949 certification Automotive LiDAR manufacturer, RoboSense, has obtained the IATF 16949 certificate in the automotive field, which now fully qualifies it to supply to automotive customers.
Manz to deliver assembly lines to Akasol for battery production Manz AG has received an order from the German Akasol AG for assembly lines to produce lithium-ion battery modules. The placing of the order with a total volume of up to EUR 20 million euros has been split into several tranches.
ZKW with new locations in Korea and China The ZKW Group ended 2019 by establishing a branch in Incheon, Korea, near Seoul.
Connected Community Networks picks up Introbotix Colorado-based Connected Community Networks (CCN), a provider of products and services for development, verification and manufacturing in the high-frequency electronics space, has acquired testing specialist Introbotix.Load more news