Electronics Production | September 01, 2006
Poland Selects Gemalto Technology for its Electronic Passport Program
Gemalto today announced it will supply its Setec e-passport solution for the future Polish electronic passports. The first commercial deliveries started in July, and under the frame agreement, Gemalto will provide the Polish Printing State Agency (PWPW) with the inlays for electronic covers of the future passports to be provided to Polish citizens.
In compliance with the European Union recommendations, Poland started issuing electronic passports for their citizens by the end of August 2006. A successful pilot phase including over 3 000 diplomatic e-passports took place earlier this year, confirming Gemalto as the main supplier for the global roll out handled by the Polish Ministry of Interior and Administration. According to the Ministry of Interior and Administration, all new Polish passports needed to be electronically-enabled by the end of August 2006. The Polish Printing State Agency currently produces around 1.5M passports each year. Gemalto's Setec e-passport solution, enhanced by Setec secure technology, includes the company's highly secure operating system, with cryptographic features running on a large capacity contactless chip embedded in the booklet's back cover sheet. “Gemalto is delighted to contribute to the Polish e-passport program. Our co-operation with the national agencies has been extremely constructive and our common target to develop a secure and well-performing solution for the benefit of the country's passport holder exceeded expectations”, said Jacques Seneca, President Europe at Gemalto. Many countries worldwide are expected to start nationwide rollouts of their biometric passports during the course of this year. With strong references and global footprint, Gemalto has the most complete product and service offer in the emerging identification market. Current e-passport references of Gemalto include the Czech Republic, France, Norway, Portugal, Russia, Singapore, Slovenia, Sweden and the United States of America. To date, Gemalto has enabled more than 3 million e-passports with its secured chip-based technology.
GM: Detroit-Hamtramck to be EV assembly only GM announced today a USD 2.2 billion investment at its Detroit-Hamtramck assembly plant that will make it the automaker’s first facility completely dedicated to EV auto assembly.
Indra opens massive radar factory as it concentrates its manufacturing The new factory, located in San Fernando de Henares, will concentrate the company’s entire radar manufacturing for civil and military use.
New production lines installed at ESCATEC Penang Several new production lines are being set up at the company’s main facility in Penang, which hosts ESCATEC Electronics (EEM) and ESCATEC Medical (EDM).
Greg Grace takes the helm as MD of Incap Estonia Greg Grace has been appointed Director, Operations Estonia, and Managing Director of Incap Electronics Estonia, and member of Incap Group’s Management Team.
NA semi equipment industry posts December 2019 billings North America-based manufacturers of semiconductor equipment posted USD 2.49 billion in billings worldwide in December 2019 (three-month average basis), according to SEMI.
NOTE increases deliveries to Hövding Hövding 3, the latest version of the company’s airbag helmet, is fully ramped up at NOTE’s plant in China.
Eguana inks deal for residential energy storage systems Eguana Technologies Inc. has entered into a development contract with an unnamed renewable energy company to develop and certify proprietary residential storage systems for distribution through its sales channels across global markets.
BlueRing Stencils picks up Stone Mountain Tool BlueRing Stencils has acquired Georgia-based tooling supplier Stone Mountain Tool.
Bosch increases its stake in fuel-cell expert Ceres Power Bosch has increased its stake in Ceres Power from 3.9% to circa 18%. Bosch’s total investment in the company will be approximately 90 million euros.
Haldex Heidelberg staff urges management to reconsider the closure It was back in October of 2019 that Haldex announced that it was streamlining its production in Europe, a decision that would see the move of production from Heidelberg in Germany to Szentlörincskáta in Hungary.
Foxconn’s Gou: WI plant operational this year Foxconn Technology Group founder Terry Gou is indicating that the company’s new manufacturing facility in Mount Pleasant, Wisconsin, still currently under construction after multiple slowdowns, will generate products beginning this year.
Zentech acquires Trilogy Circuits LLC Zentech Manufacturing has acquired Texas-based Trilogy Circuits LLC, a provider of EMS services to military primes and other high-reliability industries in Texas and across the United States.
Markus Jeck to take lead of Enics Switzerland EMS provider Enics has appointed Markus Jeck as the new General Manager of Enics Switzerland.
Hanwha Precision Machinery launches tech centre in Germany Hanwha Techwin Automation Americas' – formerly Samsung C&T Automation – unit, Hanwha Precision Machinery, has launched an integrated tech centre for Europe in Germany to accelerate its global expansion.
TTM Technologies to sell four China manufacturing plants TTM Technologies is executing a definitive agreement under which the company has agreed to divest its four China manufacturing plants – which make up substantially all of the assets of its Mobility business unit.
Incap acquires AWS Electronics EMS provider Incap has signed an agreement to acquire 100% ownership of AWS Electronics Group.
Ampleon, Rochester Electronics ink deal RF power products supplier Ampleon and semiconductor manufacturer Rochester Electronics have forged a strategic partnership to extend the global supply of Ampleon’s VDMOS portfolio of high-performance RF transistors.
Trust Automation appoints new COO California-based Trust Automation Inc., a supplier of automation technology for industrial and defense applications, has welcomed Teddy Ross to the company as chief operations officer, effective immediately.
TDK Ventures invests in SLD Laser TDK Ventures Inc., a subsidiary of TDK Corporation, has invested in SLD Laser, a specialist in the use of gallium nitride (GaN) in the commercialization of visible laser light sources for multiple applications including automotive, mobility, medical, and specialty lighting.
Sono Motors hits its target - community funding works The Munich-based mobility provider Sono Motors has successfully completed the extension of its campaign to finance the company and has exceeded its target of EUR 50 million.
New group structure at Mycronic aimed securing future growth Swedish creator of production equipment, Mycronic, has grown quite a bit during the last years; both organically but also through acquisitions. And with that growth some structure is in order.
Zenuity and HP Enterprise team up to develop next-gen autonomous driving cars Hewlett Packard Enterprise (HPE) has been selected by Zenuity, a Swedish developer of software for self-driving and assisted driving cars, to provide the crucial artificial intelligence (AI) and high-performance computing (HPC) infrastructure it needs in order to develop next generation autonomous driving (AD) systems.
Honeywell, Lockheed Martin win NASA contracts Honeywell and Lockheed Martin have both announced recent contracts for the supply of key components to NASA’s Orion spacecraft fleet for the upcoming Artemis lunar missions.Load more news