© Drlyly75 Dreamstime.com Electronics Production | September 30, 2019
Keysight & OPPO set up joint 5G test lab in Shenzhen
Keysight Technologies says that the company has established a joint 5G test laboratory in Shenzhen, China with mobile device manufacturer OPPO.
The new lab uses Keysight’s 5G platform to help verify the performance of new 5G new radio (NR) designs. These solutions will enable OPPO to comprehensively test their 5G multi-mode devices in different form factors. “By setting up a joint 5G test lab with Keysight, we’re strengthening our ability to successfully launch 5G devices for deployment in a wide range of 5G use cases,” says Donny Peng, assistant vice president of Software Product Engineering in OPPO, in a press release. “The extended collaboration with Keysight reflects the confidence we have in the company’s 5G test solutions and the expertise they offer in helping us develop reliable 5G technology.” Chipset manufacturers and their mobile device ecosystems use Keysight's 5G NR platform, which is compliant to the latest 3GPP 5G NR standards, to accelerate development, validation and carrier acceptance. The platform supports both sub-6GHz and mmWave frequencies for conducted and over-the-air (OTA) testing. Common development tools enable users to share design insights gained across each stage of the device lifecycle. “Leading 5G device makers such as OPPO recognize the importance of robust testing prior to successful and competitive commercial product launches in a global marketplace,” adds Kailash Narayanan, vice president and general manager of Keysight's wireless test group. “This joint lab is a key milestone in our 5G collaboration with OPPO to help them deliver on their 5G strategy and bring leading 5G devices to the market.”
GE Appliances invests $62 million at its Louisville facility The manufacturer is gearing up to build high-end refrigerators and expand capacity at its manufacturing facility in Louisville, Kentucky., creating 260 new jobs.
Eaton buys new facility – merges busway operations from multiple sites Power management company Eaton has purchased a new facility in Hodges, South Carolina, establishing a new home for Eaton’s busway product line currently spanning three facilities across Greenwood County.
AIM adds new facility in Brazil AIM Solder has opened a new wholly-owned facility in Manaus, Brazil. This new stocking facility, which represents the only legitimate source of AIM products in Brazil, enables the company to support a growing Brazilian market.
PFOA now in REACh and POP regulation On 4 July, PFOA - perfluorooctanoic acid, its salts and precursor compounds - was included in the POP (Persistent Organic Pollutants) Regulation (EU) 2019/1021 and at the same time also came into force in the REACh Regulation (Annex XVII, entry 68).
Manz AG receives further Battery order Manz AG is expanding its successful partnership with an international battery manufacturers in the Energy Storage segment with a further major order in the mid double-digit million euro range.
Advantech and Interlatin to set up JV in Mexico Industrial IoT specialist, Advantech, says it is establishing a joint venture subsidiary in Mexico with its channel partner Interlatin.
Mercedes-Benz takes equity stake in Farasis Mercedes-Benz is taking another important step on its journey towards CO₂--neutral mobility. The Stuttgart-based car manufacturer has launched a strategic partnership with Chinese battery cell manufacturer Farasis Energy (Ganzhou) Co., Ltd., including taking an equity stake.
A new EMS provider sees the light of day EMS providers DataED and Bestronics merge to launch a new player – Emerald EMS.
Tektronix joins the fight agains COVID-19 Tektronix has shifted its focus from supporting vehicle manufacturing to assisting with ventilator production.
ABB completes divestment of Power Grids to Hitachi ABB has reached a significant milestone in the company’s transformation towards a decentralized global technology company, with the completion of the divestment of 80.1% of its Power Grids business to Hitachi.
Germany amps up domestic battery production with massive state subsidies The German government is investing more than EUR 1.5 billion in battery cell research and production.
Internal promotions and executive retirements at Kimball EMS provider, Kimball Electronics, has made two new internal promotions aimed at contributing to the company accelerating its strategic growth plans.
Kyocera & TMDU team up for research on vitals measurement headset Kyocera Corporation and Tokyo Medical and Dental University (TMDU) have teamed up on a joint research project to develop a wireless headset that can remotely monitor high accuracy patient biometrics, such as blood oxygen saturation (SpO2).
German battery manufacturer receives funding for cell production facility VARTA AG receives public funding of EUR 300 million for battery cell production facility.
Scanfil to streamline its factory network The EMS provider is planning to combine the production of its Hamburg factory with its other factories in Germany and Poland
Kitron awarded new order within measurement technology Kitron has been awarded new business for measurement technology. The award covers a period of five years, and the expected annual value is between EUR 3.5-5 million.
NORBIT ASA awarded aquaculture contract Norwegian technology manufacturer, NORBIT, has been awarded a new contract from an existing customer within the aquaculture market.
Saki strengthens its Asian operations The AOI specialist is expanding its global sales organisation with new Asia sales department, and appointing Katsuhiro Eddie Ichiyama as Senior General Manager for the Asian region
Scanfil to sell its plant in Hangzhou, China The board of directors of the Finnish EMS prover has decided to sell the entire share capital of its subsidiary located in Hangzhou, China, for a total of EUR 18.4 million to Hangzhou Cabinet Technology Co., Ltd.
Staying put during the COVID-19 pandemic TPCA (Taiwan Printed Circuit Association) announced the production and sales data for Q1 2020; the output value of Taiwan cross-strait PCB industry totalled NT$136.9 billion (approx. US$4.541 billion) in Q1/2020.
North American PCB industry sales up 1.0% in May Total North American PCB shipments in May 2020 were up 1.0 percent compared to the same month last year. Compared to the preceding month, May shipments fell 3.0 percent.
Sensirion expands with new production site in Hungary In a response to positive business trends and the increasing demand for its existing and new sensors, Sensirion is expanding its production capabilities by establishing a production site in Debrecen, Hungary.
Management Change at the Würth Elektronik eiSos Group After 27 years in the Würth Elektronik Group, Oliver Konz has decided to resign his position as Executive Vice President of the Würth Group and CEO of the Würth Elektronik eiSos Group for personal reasons and leave the company.
Kurtz Ersa inaugurates new production hall In Bestenheid, Germany, the company has just opened its new production and administration building. Following 24 months of construction and furnishing, the company now have access to 4’500 new square metres of space.Load more news
- A new EMS provider sees the light of day
- Global microelectronics market with overall stable development
- GaN and SiC power semiconductor markets set to pass $1 billion mark in 2021
- Germany amps up domestic battery production with massive state subsidies
- ABB completes divestment of Power Grids to Hitachi