© Airbus SE General | November 26, 2018
Tech-savvy CIMON on par with Alexander Gerst?
'Passed with flying colours'; that's the verdict given to CIMON* (Crew Interactive Mobile CompanioN), astronaut assistant, developed and built by Airbus on behalf of the German Aerospace Center (DLR),
To be exact, CIMON worked together with German ESA astronaut, Alexander Gerst, in the Columbus module of the International Space Station (ISS) for around 90 minutes. Alexander Gerst has been living and working on the ISS since 8 June 2018. His current horizons mission, lasting six months, includes conducting a series of tests with CIMON. This medicine-ball-sized plastic sphere, which weighs five kilogrammes, was created using 3D printing and is the first AI-based astronaut assistant – an experimental technology studying human-machine interaction in space. At 11:40 h CET on 15 November 2018, the German-Swiss CIMON mission team at Lucerne University’s BIOTESC ground control centre in Switzerland waited with bated breath. After two and a half years of intense preparation and countless hours of training, it was so quiet you could have heard a pin drop, the air thick with intense concentration and joyful anticipation. Following a software upload to the ISS and a software update for CIMON itself, an audio check and a test of the navigation camera, Alexander Gerst finally came face to ‘face’ with his new artificial roommate, activating it for the very first time. The first ‘meeting’ between the German ESA astronaut and the free-flying robotic crew assistant, a world first, lasted 90 minutes. CIMON’s autonomous navigation was then tested, seeing the assistant perform several turns and movements in every direction. It was able to search for Gerst’s face and make ‘eye’ contact. As a demonstration of its assistance capabilities, CIMON displayed instructions for a school science experiment on crystallisation and a video of the Rubik’s cube puzzle on its ‘face’, a screen set in the centre of the sphere, and played a piece of music. It then tested its ultrasonic sensors, which have a similar function to a car’s parking sensors, and took a photo and shot a video of Gerst using its integrated cameras. Finally, Gerst returned his crew assistant to its place in the Columbus module. “CIMON represents the realisation of an Airbus vision. It is a huge step forward for human space flight, achieved by working in cooperation with our partners. With CIMON, we have laid the foundations for social assistance systems that are designed to be used under extreme conditions,” said Till Eisenberg, CIMON Project Manager at Airbus, states in a press release. “It is an incredible feeling and absolutely fantastic to be able to experience CIMON actually seeing, hearing, understanding and speaking. This first, real deployment in space has made aerospace history, and marks the start of what will hopefully be a long deployment on the ISS,” said Dr Christian Karrasch, CIMON Project Manager at the DLR Space Agency. “I am fascinated by interactions with artificial intelligence. The CIMON system is the only one of its kind, and was designed specifically for deployment on the International Space Station. We are entering uncharted territory and pushing the boundaries of technological expertise in Germany.” CIMON uses the Wi-Fi on the ISS to transmit data, making use of satellite connections to ground stations to establish an internet connection with the IBM Cloud. Matthias Biniok, IBM project lead, explained the processes that then take place in CIMON’s ‘brain’: “If CIMON is asked a question or addressed, the Watson AI firstly converts this audio signal into text, which is understood, or interpreted, by the AI. IBM Watson not only understands content in context, it can also understand the intention behind it. The result is a tailored answer, which is converted into speech and then sent back to the ISS, enabling a natural, dynamic spoken dialogue.” Bernd Rattenbacher, team leader at the ground control centre at Lucerne University, said: “The data link to Earth is established via satellite to NASA/ESA and to the DLR’s Columbus control centre in Oberpfaffenhofen, Germany. From there, the signal is transmitted to us, the CIMON ground station at BIOTESC in Lucerne, the Swiss User Support and Operations Center, which is connected to the IBM Cloud in Frankfurt over the internet. The time needed for the signal to be transmitted via satellite is 0.4 seconds each way. A number of firewalls and VPN tunnels are in place to ensure data security.” CIMON also has a scientific background: its advisors are Dr Judith-Irina Buchheim and Professor Alexander Choukèr from the Department of Anaesthesiology at the Ludwig-Maximilian University Hospital in Munich. Buchheim said: “As a partner and assistant, CIMON could support astronauts with their high workload of experiments and maintenance and repair work, thereby reducing their exposure to stress.”
Copyright: © Airbus SE
Copyright: © Airbus SE
A new EMS provider sees the light of day EMS providers DataED and Bestronics merge to launch a new player – Emerald EMS.
Tektronix joins the fight agains COVID-19 Tektronix has shifted its focus from supporting vehicle manufacturing to assisting with ventilator production.
ABB completes divestment of Power Grids to Hitachi ABB has reached a significant milestone in the company’s transformation towards a decentralized global technology company, with the completion of the divestment of 80.1% of its Power Grids business to Hitachi.
Germany amps up domestic battery production with massive state subsidies The German government is investing more than EUR 1.5 billion in battery cell research and production.
Internal promotions and executive retirements at Kimball EMS provider, Kimball Electronics, has made two new internal promotions aimed at contributing to the company accelerating its strategic growth plans.
Kyocera & TMDU team up for research on vitals measurement headset Kyocera Corporation and Tokyo Medical and Dental University (TMDU) have teamed up on a joint research project to develop a wireless headset that can remotely monitor high accuracy patient biometrics, such as blood oxygen saturation (SpO2).
German battery manufacturer receives funding for cell production facility VARTA AG receives public funding of EUR 300 million for battery cell production facility.
Scanfil to streamline its factory network The EMS provider is planning to combine the production of its Hamburg factory with its other factories in Germany and Poland
Kitron awarded new order within measurement technology Kitron has been awarded new business for measurement technology. The award covers a period of five years, and the expected annual value is between EUR 3.5-5 million.
NORBIT ASA awarded aquaculture contract Norwegian technology manufacturer, NORBIT, has been awarded a new contract from an existing customer within the aquaculture market.
Saki strengthens its Asian operations The AOI specialist is expanding its global sales organisation with new Asia sales department, and appointing Katsuhiro Eddie Ichiyama as Senior General Manager for the Asian region
Scanfil to sell its plant in Hangzhou, China The board of directors of the Finnish EMS prover has decided to sell the entire share capital of its subsidiary located in Hangzhou, China, for a total of EUR 18.4 million to Hangzhou Cabinet Technology Co., Ltd.
Staying put during the COVID-19 pandemic TPCA (Taiwan Printed Circuit Association) announced the production and sales data for Q1 2020; the output value of Taiwan cross-strait PCB industry totalled NT$136.9 billion (approx. US$4.541 billion) in Q1/2020.
North American PCB industry sales up 1.0% in May Total North American PCB shipments in May 2020 were up 1.0 percent compared to the same month last year. Compared to the preceding month, May shipments fell 3.0 percent.
Sensirion expands with new production site in Hungary In a response to positive business trends and the increasing demand for its existing and new sensors, Sensirion is expanding its production capabilities by establishing a production site in Debrecen, Hungary.
Management Change at the Würth Elektronik eiSos Group After 27 years in the Würth Elektronik Group, Oliver Konz has decided to resign his position as Executive Vice President of the Würth Group and CEO of the Würth Elektronik eiSos Group for personal reasons and leave the company.
Kurtz Ersa inaugurates new production hall In Bestenheid, Germany, the company has just opened its new production and administration building. Following 24 months of construction and furnishing, the company now have access to 4’500 new square metres of space.
PCB industry: 1Q/2020 overshadowed by corona pandemic After a significant drop in sales at the end of last year, PCB manufacturers in the Germany, Austria and Switzerland (DACH) region recorded a sales growth of 16.1 percent in the first quarter of 2020.
Integration of ATLID completes European set of instruments for EarthCARE satellite With the successful integration of the ATLID-Instrument the EarthCARE satellite (Clouds Aerosols and Radiation Explorer) has passed a crucial milestone, as it concludes the "onboarding" of the three European instruments.
ABB Robotics rolls out Lexi’s procurement analytics solution Automation giant, ABB Robotics, is using a big data analytics software solution developed by Lexi Solution AB in Sweden to optimise procurement and engineering processes.
OHB placing the largest clean room in operation After only 14 months of construction, the PLATO hall has now been officially completed at space company OHB’s headquarters in Bremen. With a floor area of around 1,400 square meters, the ISO 8 cleanroom*, which is almost eleven meters high, is the OHB Group’s largest cleanroom facility.
Jenoptik expands military laser rangefinder capabilities in the US JENOPTIK Optical Systems, LLC has announced an expansion of its capabilities for military laser rangefinders (LRF) and is adding custom engineering and testing capabilities to their Jupiter, Florida facility.
Tesla plans battery manufacturing facility in California Electric car manufacturer Tesla plans to build a battery research and manufacturing facility in Fremont, California. N, to be operated around the clock, Under a project dubbed Roadrunner, documents from the city government also reveal a potential 24/7 operation at the facility.
Northrop Grumman awards contracts to Kitron Northrop Grumman has awarded Kitron a production contract for Integrated Communications, Navigation and Identification (ICNI) modules for the F-35 Lightning II program.Load more news