© begemot 30 dreamstime.com Analysis | May 11, 2018
Mini LED may have a chance to compete with OLED in several markets
According to TrendForce (WitsView)’s latest report New Display Technology Cost Analysis, some manufacturers have focused on the development of Mini LED, expecting it to become a transitional product before Micro LED is ready for mass production.
The architecture of Mini LED is similar to that of current LED backlight in LCD displays, so no major change in the design is needed. However, Mini LED is bound to face the direct competition from OLED in the sector of consumer electronics such as smartphones and TV. For the short term, large-size TV and high-end IT products will be the segments where Mini LED has the chance to compete with OLED. Comparable to OLED in color saturation and cost In TV market, OLED color patterning technique is not mature yet, while the material utilization rate of current evaporation process is only 20 to 30%. In fact, if evaporation is used to make full-color TV, the problems will be low yield rate and material utilization rate. Therefore, WOLED is the main technique used currently, which consists of yellow/green and blue light-emitting units to emit white light, then color filters are used to present full color. This architecture still has advantages in contrast and thickness, however, Mini LED with QD film backlight may achieve the same level of color saturation as WOLED does. Taking 65-inch UHD OLED TV panel as an example, the production cost is probably between 950 and 1,000 US dollars. As for a 65-inch UHD with Mini LED backlight, which uses 30,000 to 40,000 LEDs, the production cost is between 900 to 1,000 US dollars. Since power consumption is not a priority issue for television, and the cost of Mini LED is actually similar with that of OLED, Mini LED does have an opportunity in the market. Recently, first-tier makers such as Samsung Electronics and LGE have demonstrated related products or announced that they plan to launch large-size Mini LED TVs and commercial display. Mini LED may target at high-end IT products if costs are not a priority for vendors WitsView notes that, when the costs are not a priority for vendors, Mini LED has higher chance to be adopted. Current devices using Mini LED include the 10.1-inch automotive display released by Innolux at the CES 2018, the 27-inch LCD gaming monitor, 15.6-inch notebook and 2-inch VR devices launched by AUO recently, etc. It can be seen that the Mini LED technology has more opportunities in niche markets, where the prices for products are high. Inevitably, IT products are used for word processing from time to time, so the problem of burn-in caused by long-lasting static images remains an issue for OLED. In 2016, adoption in smartphone is priority for Samsung's OLED panel production capacity, which makes Samsung lose the opportunity to enter IT market. In recent years, with the increasing size and revenue of gaming market, IT product vendors are eager to launch gaming products with high-margin and high added value. In addition, HDR standards have been applied to PC monitors recently, and local dimming of Mini LED has fully demonstrated HDR. Therefore, high-end IT products will be one of the several segments where Mini LED has the chance to compete with OLED from the same starting point.
More information can be found at TrendForce.
More information can be found at TrendForce.
U.S. chipmaking industry seeks to slow export rule changes Nine semi-conductor industry groups urged U.S. Commerce Secretary Wilbur Ross slow the momentum to finalizing recently proposed rules that would further limit U.S. exports of semiconductors and other technology to China.
Flex Ltd. sets goal of 30,000 ventilators a month Silicon Valley-based Flex Ltd. has started mass assembly of critically needed ventilators to meet surging demand for the machines across the United States in the wake of the coronavirus pandemic.
Elvia PCB supports the fight against COVID-19 with PCBs European PCB manufacturer, Elvia PCB Group, has been working non-stop since the beginning of the COVID-19 pandemic. The company is part of a project to manufacture thousands of ventilators by mid-May.
Neways Electronics Neunkirchen introduces short-time work Neways Electronics Neunkirchen (NEN) in Germany, is responding to the consequences of the COVID-19 outbreak and will be introducing short-time work from April 1st, 2020.
European semiconductor sales up 2.4% in February 2020 The European Semiconductor Industry Association (ESIA) says that European sales of semiconductors reached USD 3.323 billion in February 2020, an increase of 2.4% compared to the January 2020 total of USD 3.247 billion.
Hisense Gorenje extends production shutdown Hisense Gorenje says that it is extending its production shutdown at all its factories in Europe for another week.
Plexus starts production of ventilators in Scotland EMS provider Plexus is participating in the UK government’s efforts to expedite the manufacturing of ventilators in aide of the fight against COVID-19.
NCAB appoints Peter Kruk as new CEO Following the announcement late last year that Hans Ståhl planned to retire in 2020, the board of NCAB Group has now found his successor. Peter Kruk will be taking over as the new CEO of the PCB supplier.
Comtech Telecomm Corp. issues business update New York-based Comtech Telecommunications Corp. has issued a statement on the withdrawal of its business outlook for its fiscal year ending July 31, 2020, as well as an update on its proposed purchase of the Gilat Satellite Networks Ltd.
Xerox provides HP acquisition update Xerox has issued a statement regarding its earlier proposal to buy HP Inc.
As Samsung Display exits the LCD market a major reshuffle is expected According to the latest investigations by the WitsView research division of TrendForce, the oversupply of TV panels in 2019 resulted in a major price drop. As such, panel manufacturers hoped to utilise their excess capacity in 2020 through increasing their production of monitor panels, with Samsung Display (SDC) having the most extensive plans.
Swedish PCB manufacturer updates machine park PCB manufacturer MMAB’s factory in the south of Sweden recently got a new drilling area with updated machines.
Ventec races to build up regional inventories to fight COVID-19 The electronics industry is playing a major role in supporting increased requirements for critical medical devices during the current COVID-19 pandemic. And with that an increase in demand of the building blocks is to be expected.
Elmatica sees a spike in demand - responds with growth in staff Growing demand, new customers and an increase in business within knowledge intensive industries, has reinforced the need for another Country Manager in Poland, a new Technical Manager and an additional resource in the Customer Service Department.
Co-operation negotiations completed at Etteplan Etteplan initiated co-operation negotiations on March 18th 2020 due to temporary changes in customer demand caused by the COVID-19 pandemic. Now, the negotiations have come to a complete.
Indian electronics company support the fight against COVID-19 Indian engineering and technology solutions company, Cyient, says it’s received clearance for its Mysore facility to run its MedTech manufacturing lines to support the production of medical equipment critical in the fight against COVID-19
Tesvolt kickstarts production at new German factory Semi-automated production began today in Europe’s first gigafactory for commercial battery storage systems, located in Wittenberg, Germany.
Global semiconductor materials market revenues slip 1.1% in 2019 Global semiconductor materials market revenues edged down 1.1% in 2019, SEMI reported in its Materials Market Data Subscription (MMDS).
Cirexx Int’l posts COVID-19 update Santa Clara, California-headquartered Cirexx International has released a statement penned by President and CEO Philipp Menges concerning status of operations during the coronavirus pandemic.
Abbott gets OK for fast, portable COVID-19 test Abbott has been granted emergency use authorization (EUA) from the U.S. Food and Drug Administration (FDA) for a rapid molecular point-of-care test for the detection of novel coronavirus (COVID-19).
COVID-19 limits viability for AT&S Considering current events and the effects that the global pandemic is having on logistics and production chains worldwide, AT&S is preparing itself for a decline in demand in some of its customer segments.
Neways provides update on COVID-19 impact The EMS provider says it has taken various measures to limit the risks to the health of its employees, as well as its clients and suppliers. In addition, the company has taken measures to safeguard business continuity.
Samsung Display plans to stop all LCD production in 2020 The South Korean company has reached the decision to end all of its production of LCD panels in its home country and in China by the end of 2020.
Orbit One updates machine park with new selective soldering machine Swedish EMS provider, Orbit One, has invested in a new ERSA selective soldering machine for the production unit in Ronneby, Sweden.Load more news