© rasa-messina-francesca-dreamstime.com Electronics Production | May 19, 2014
EMS factory torched during protests in Vietnam
An EMS factory is the latest victim in the ongoing protests in Vietnam.
The dispute in the South China Sea, which triggered anti-China protests in the country, leading to vandalism and turmoil in the region is still ongoing, and escalating. Evertiq has previously reported about Foxconn suspending its Vietnamese operations for three days due to the social unrest. The company is now back to normal and its production lines are once again operating, according to a report in The Taipei Times. While all seems to be back to normal for Foxconn, another Taiwan-based EMS company has not been as lucky. EMS-provider Fittec International saw one of its factory’s – which accounts for 24% of its production – torched and looted by rioters. The factory – which focuses on the manufacturing of printed circuit board, electronics components and related parts – had 16 SMT lines, with a production capacity of 24.3 billion chips per year, representing approximately 24% of the company's total production capacity, the company writes in a statement. Fittec cannot provide an estimate of the financial loss.
A new EMS provider sees the light of day EMS providers DataED and Bestronics merge to launch a new player – Emerald EMS.
Tektronix joins the fight agains COVID-19 Tektronix has shifted its focus from supporting vehicle manufacturing to assisting with ventilator production.
ABB completes divestment of Power Grids to Hitachi ABB has reached a significant milestone in the company’s transformation towards a decentralized global technology company, with the completion of the divestment of 80.1% of its Power Grids business to Hitachi.
Germany amps up domestic battery production with massive state subsidies The German government is investing more than EUR 1.5 billion in battery cell research and production.
Internal promotions and executive retirements at Kimball EMS provider, Kimball Electronics, has made two new internal promotions aimed at contributing to the company accelerating its strategic growth plans.
Kyocera & TMDU team up for research on vitals measurement headset Kyocera Corporation and Tokyo Medical and Dental University (TMDU) have teamed up on a joint research project to develop a wireless headset that can remotely monitor high accuracy patient biometrics, such as blood oxygen saturation (SpO2).
German battery manufacturer receives funding for cell production facility VARTA AG receives public funding of EUR 300 million for battery cell production facility.
Scanfil to streamline its factory network The EMS provider is planning to combine the production of its Hamburg factory with its other factories in Germany and Poland
Kitron awarded new order within measurement technology Kitron has been awarded new business for measurement technology. The award covers a period of five years, and the expected annual value is between EUR 3.5-5 million.
NORBIT ASA awarded aquaculture contract Norwegian technology manufacturer, NORBIT, has been awarded a new contract from an existing customer within the aquaculture market.
Saki strengthens its Asian operations The AOI specialist is expanding its global sales organisation with new Asia sales department, and appointing Katsuhiro Eddie Ichiyama as Senior General Manager for the Asian region
Scanfil to sell its plant in Hangzhou, China The board of directors of the Finnish EMS prover has decided to sell the entire share capital of its subsidiary located in Hangzhou, China, for a total of EUR 18.4 million to Hangzhou Cabinet Technology Co., Ltd.
Staying put during the COVID-19 pandemic TPCA (Taiwan Printed Circuit Association) announced the production and sales data for Q1 2020; the output value of Taiwan cross-strait PCB industry totalled NT$136.9 billion (approx. US$4.541 billion) in Q1/2020.
North American PCB industry sales up 1.0% in May Total North American PCB shipments in May 2020 were up 1.0 percent compared to the same month last year. Compared to the preceding month, May shipments fell 3.0 percent.
Sensirion expands with new production site in Hungary In a response to positive business trends and the increasing demand for its existing and new sensors, Sensirion is expanding its production capabilities by establishing a production site in Debrecen, Hungary.
Management Change at the Würth Elektronik eiSos Group After 27 years in the Würth Elektronik Group, Oliver Konz has decided to resign his position as Executive Vice President of the Würth Group and CEO of the Würth Elektronik eiSos Group for personal reasons and leave the company.
Kurtz Ersa inaugurates new production hall In Bestenheid, Germany, the company has just opened its new production and administration building. Following 24 months of construction and furnishing, the company now have access to 4’500 new square metres of space.
PCB industry: 1Q/2020 overshadowed by corona pandemic After a significant drop in sales at the end of last year, PCB manufacturers in the Germany, Austria and Switzerland (DACH) region recorded a sales growth of 16.1 percent in the first quarter of 2020.
Integration of ATLID completes European set of instruments for EarthCARE satellite With the successful integration of the ATLID-Instrument the EarthCARE satellite (Clouds Aerosols and Radiation Explorer) has passed a crucial milestone, as it concludes the "onboarding" of the three European instruments.
ABB Robotics rolls out Lexi’s procurement analytics solution Automation giant, ABB Robotics, is using a big data analytics software solution developed by Lexi Solution AB in Sweden to optimise procurement and engineering processes.
OHB placing the largest clean room in operation After only 14 months of construction, the PLATO hall has now been officially completed at space company OHB’s headquarters in Bremen. With a floor area of around 1,400 square meters, the ISO 8 cleanroom*, which is almost eleven meters high, is the OHB Group’s largest cleanroom facility.
Jenoptik expands military laser rangefinder capabilities in the US JENOPTIK Optical Systems, LLC has announced an expansion of its capabilities for military laser rangefinders (LRF) and is adding custom engineering and testing capabilities to their Jupiter, Florida facility.
Tesla plans battery manufacturing facility in California Electric car manufacturer Tesla plans to build a battery research and manufacturing facility in Fremont, California. N, to be operated around the clock, Under a project dubbed Roadrunner, documents from the city government also reveal a potential 24/7 operation at the facility.
Northrop Grumman awards contracts to Kitron Northrop Grumman has awarded Kitron a production contract for Integrated Communications, Navigation and Identification (ICNI) modules for the F-35 Lightning II program.Load more news