© franz schloegl dreamstime.com Analysis | September 19, 2013
TSMC to sell USD 6.33bn worth of ≤28nm devices this year
Before GlobalFoundries entered the foundry market, TSMC was by far the technology leader among the major pure-play foundries.
For 2013, 51% of TSMC’s revenue is expected to be from ≤45nm processing. As expected, with GlobalFoundries’ fabs having a large portion of their capacity dedicated to producing AMD’s MPUs over the past few years, its processing technology is skewed toward leading-edge feature sizes. In 2013, 50% of GlobalFoundries’ sales are forecast to be from ≤45nm production. In 2012, only TSMC, GlobalFoundries, and UMC had significant sales of ≤45nm technology. In 2013, TSMC is expected to have about 4x the dollar volume sales at ≤45nm as compared to GlobalFoundries and about 12x the ≤45nm sales of UMC ($10.33 billion for TSMC, $2.53 billion for GlobalFoundries, and $0.89 billion for UMC). In contrast, SMIC only entered initial production of its 45nm technology in early 2012, more than three years after TSMC first put its 45nm process into production and is forecast to sell only $0.22 billion of ≤45nm technology this year. In fact, only 22% of UMC’s 2013 revenue and 11% of SMIC’s 2013 sales are forecast to come from devices having ≤45nm feature sizes, which is why their revenue per wafer is so low as compared to TSMC and GlobalFoundries. It is interesting to note that all of the increase in pure-play foundry sales in 2013 is expected to be due to ≤28nm feature size device sales (Figure 1). Although forecast to represent 78% of total pure-play foundry sales this year, the >28nm pure-play foundry market is expected to decline 3% in 2013. In contrast, the 2013 leading-edge ≤28nm pure-play foundry market is forecast to triple this year. Not only is essentially all the of pure-play foundry market growth forecast to come from leading-edge production, most of the profits that will be realized are also expected to come from the finer feature size sales. TSMC had almost $1.5 billion in 28nm sales in 2Q13 and is forecast to have about $6.33 billion in sales of 28nm devices for all of 2013, over 3x the $2.10 billion worth of 28nm product the company sold in 2012. As a result, TSMC is expected to hold a 78% share of the pure-play foundry industry’s $8.10 billion of ≤28nm sales this year. IC Insights continues to believe that the more profitable (i.e., successful) major pure-play foundries, which include TSMC, GlobalFoundries, UMC, and SMIC, will be those that keep at the leading edge of the process technology roadmap. This can be accomplished through joint ventures and licensing agreements, (e.g., the partnership between IBM and GlobalFoundries) and/or through significantly increasing R&D spending to devel op advanced technology, as TSMC has done.
American Battery Metals, U.S. lawmakers convene American Battery Metals Corporation has completed a series of meetings with lawmakers and personnel in the Department of Energy and Department of the Interior in Washington, D.C., to discuss issues critical to the domestic battery production and storage industry.
Cogiscan, Critical Mfg. form strategic partnership Quebec, Canada-based Cogiscan and Critical Manufacturing, headquartered in Portugal, have forged a strategic partnership to deliver smart factory solutions for electronics manufacturers.
Collins Aerospace expanding in North Africa Collins Aerospace Systems, a unit of United Technologies Corp., has taken the first step toward the expansion of its existing site in Casablanca, Morocco.
The advantage of Vantage - Garrett Wong tells the tale Nordson Asymtek's Garrett Wong gives us a rundown of the business year and also details the Vantage Advantage
Sponsored content by NCAB Group Benelux B.V.Failure is not an option for a PCB More than 30% of the Gerbers NCAB Group Benelux B.V. reviews, have problems. However, the PCB are integrated in key end-user product with more and more High Tech PCB. We are here to support you on the new technologies growth to maintain a high reliability and quality. Contact us to review it together.
Saki’s Eddie Ichiyama details a very successful business year Eddie ichiyama from Saki gave us an update on how 2019 has been for the company and also shared some details on the recent expansion in the Czech Republic.
The ripple effect of Enrico Krog Iversen while being an active part in creating one of the fastest growing robotics companies in modern time might have been enough for most people, that does not seem to have slowed down a certain Danish entrepreneur.
Yamaha's Ichiro Arimoto on the business year and the company's new ventures Evertiq had the opportunity to talk to Ichiro Arimoto, General Manager of Yamaha Motor Europe, about the business year and the company's new ventures.
Mycronic, Indium forge strategic partnership Indium Corporation has announced a strategic partnership with Sweden-based Mycronic, to develop no-clean and water soluble solder pastes for jetting applications.
Sponsored content by SourcengineComponent Aggregators vs E-Commerce Marketplaces What is the difference between electronic component aggregators and a marketplace?
67% of a buyer’s journey is now done digitally. Learn how marketplaces emerged as full-cycle procurement platforms and challenged the traditional component aggregators.
SCHMID delivers PlasmaLine to Hofstetter PCB SCHMID announced it has installed the company’s first PlasmaLine comprising ICP etch & sputter deposition of its Korean JV SCHMID AVACO at Hofstetter PCB AG in Switzerland.
Cobot market to reach USD 9+ billion by 2025 A new report from Tractica is forecasting continued rapid growth for the global collaborative robot (cobot) market over the next few years, reaching revenue of USD 9.7 billion by 2025.
MixComm scores USD 8+ million in series B round New Jersey-based fabless semiconductor company MixComm has secured USD 8.6 million in series B funding led by existing investor, Kairos Ventures.
SIA elects 2020 leadership The Semiconductor Industry Association (SIA) Board of Directors has elected ON Semiconductor CEO Keith Jackson as its 2020 Chair and Qorvo CEO Robert Bruggeworth as its 2020 Vice Chair.
Si wafer shipments recede for fourth straight quarter Worldwide silicon wafer area shipments slid for the fourth consecutive quarter of 2019, according to the SEMI Silicon Manufacturers Group (SMG) in its most recent quarterly analysis of the industry.
Decline in Q4 DRAM contract prices lessens as buying momentum recovers According to the latest analysis from the DRAMeXchange research division of TrendForce, Q4 DRAM ASP is as of yet undergoing a slight QoQ decline, but this decline has shrunk down to 5%.
Technica forms growth-focused equity fund San Jose-based Technica USA has reached an agreement on an equity investment centered on future growth for the global PCB fab and assembly supplier.
IHS Markit: 5G economy in the trillions by 2035 The IHS Markit 5G Economy Study, commissioned by Qualcomm Technologies Inc., is forecasting that 5G will generate USD 13.2 trillion in sales enablement by 2035.
Sponsored content by Nordson ASYMTEKStart-to-finish conformal coating with reliability and efficiency Nordson ASYMTEK’s flexible, modular, Panorama™ S-Line delivers conformal coating process control in a space-saving footprint with overlapping line processes that minimize manufacturing floor space. This innovative, patent-pending line layout trims 50% of the line’s length by using the lower compartment in each piece of equipment for functional use. Combined with Nordson ASYMTEK’s global support, this complete conformal coating line delivers quality, product reliability, efficiency, and safety for all your conformal coating applications.
ZEUS Battery partnering with Kruvand Associates ZEUS Battery Products and Texas-based Kruvand Associates Inc. have come to a formal agreement on a collaboration that began in January and covers Texas, Arkansas, Oklahoma, Louisiana, New Mexico, Arizona and Mexico.
EPP with a new owner The company announces that is has found itself an ideal buyer – Photonics Systems Group – a manufacturer of micro-materials processing machines. With this takeover, PSG is strengthening is operations in the electronics industry and also laying the foundation for further growth.
Volkswagen starts pre-production e-mobility plant in China The new plant of the SAIC VOLKSWAGEN joint venture has been completed. It is purely built for the production of all electric vehicles on Volkswagen’s Modular Electric Drive Matrix (MEB).
Kongsberg Maritime divests KM Contros GmbH Following a strategic review, Kongsberg Maritime AS (KM) has decided to divest KM Contros GmbH (Contros) to AML Oceanographic Ltd. (AML).
Sponsored content by EsemdaContract manufacturer Esemda opens new facility in Vilnius and expands EMS The new facility has been built with reserved space for future expansions. As Esemda constantly grows, it is of great importance to be able to rapidly increase production capacity in large volumes.
SUSS MicroTec adjusts outlook for fiscal year 2019 Based on the preliminary figures for the first nine months and the updated budget figures, SUSS MicroTec is substantiating its expectations for incoming orders, sales and earnings for the current fiscal year ending December 31, 2019.
GPV's revenues soars 130% Danish EMS provider, GPV Group, announces that the company generated revenues of DKK 2.2 billion in the first nine months of 2019, a 130% year-on-year improvement driven by the acquisition of Swiss company CCS at the end of 2018.
Former GM plant now Lordstown Motors Corp. General Motors’ shuttered Lordstown plant in Ohio, which closed in March, is now in the hands of an electric truck start-up that is looking to begin production in about a year.Load more news