© alexander podshivalov dreamstime.com Electronics Production | December 04, 2012
Scientists develop indium-free organic light-emitting diodes
Scientists at the U.S. Department of Energy’s (DOE) Ames Laboratory have discovered new ways of using a well-known polymer in organic light emitting diodes (OLEDs), which could eliminate the need for an increasingly problematic and breakable metal-oxide used in screen displays in computers, televisions, and cell phones.
The metal-oxide, indium tin oxide (ITO), is a transparent conductor used as the anode for flat screen displays, and has been the standard for decades. Due to indium's limited supply, increasing cost and the increasing demand for its use in screen and lighting technologies, the U.S. Department of Energy has designated indium as "near-critical" in its assessment of materials vital to clean energy technology. Scientists have been working to find an energy efficient, cost effective substitute. “There are not many materials that are both transparent and electrically conductive,” said Joseph Shinar, an Ames Laboratory Senior Scientist. “One hundred percent of commercial display devices in the world use ITO as the transparent conducting electrode. There’s been a big push for many years to find alternatives.” “Everybody is trying to find a replacement for ITO, many working with zinc oxide, another metal oxide. But here we are working towards something different, developing ways to use a conducting polymer,” said Min Cai, a post-doctoral research scientist in the Ames Laboratory and the Dept. of Physics and Astronomy at Iowa State University. The polymer’s name is a mouthful of a word: poly (3,4-ethylene dioxythiophene):poly(styrene sulfonate), known as PEDOT:PSS for short, and has been around for about 15 years. Until recently, the material wasn’t sufficiently conductive or transparent enough to be a viable ITO substitute, Shinar said. But by using a multi-layering technique and special treatments, Cai and his fellow scientists were able to fabricate PEDOT:PSS OLEDs with vastly improved properties. “Compared to an ITO anode device, the PEDOT:PSS device is at least 44 percent more efficient,” said Cai. According to Joseph Shinar, that gain in efficiency over ITO-based technology is the highest yet recorded. The researchers used computer simulations to show that the enhanced performance is largely an effect of the difference in the optical properties between the polymer- and ITO-based devices. Another key property of PEDOT:PSS is flexibility; using ITO in OLEDs defeats one of OLED’s big pluses compared to conventional LED technology. “OLEDs can be made on a flexible substrate, which is one of their principal advantages over LEDs. But ITO is ceramic in nature; it is brittle rather than flexible,” said Ruth Shinar, a Senior Scientist at Iowa State University’s Microelectronics Research Center. The findings, co-authored by Joseph Shinar and Ruth Shinar along with Min Cai, Zhuo Ye, Teng Xiao, Rui Liu, Ying Chen, Robert W. Mayer, Rana Biswas, and Kai-Ming Ho, were recently published in Advanced Materials, one of the most prominent journals in materials science and engineering. The research builds on continuing work to find more affordable and efficient manufacturing materials and processes for OLED manufacturing. An earlier paper published in Advanced Materials by Joseph Shinar and Ruth Shinar along with Min Cai , Teng Xiao , Emily Hellerich , and Ying Chen demonstrated the use of solution processing for small molecule-based OLEDs, which are typically constructed using a more expensive thermal evaporation deposition process. The scientists’ ongoing investigations into better materials and processes pave the way to more cost-efficient manufacturing and making OLED technology more widely available to consumers. Joseph Shinar said that OLED televisions were already available to a limited high-end consumer, and that prices would come down as major manufacturers perfected their production processes. Both Samsung and LG exhibited a 55-inch OLED TV as a highlight feature of the 2012 Consumer Electronics Show in Las Vegas in January. “We are already getting there with OLED televisions. Consumers will see them getting more affordable and more widely available in the very near future,” said Joseph Shinar. Shinar said the technology was also beginning to be used in lighting, in applications where diffuse light is preferred instead of point source lighting, and in architectural and art design.
IHS Markit: 5G economy in the trillions by 2035 The IHS Markit 5G Economy Study, commissioned by Qualcomm Technologies Inc., is forecasting that 5G will generate USD 13.2 trillion in sales enablement by 2035.
ZEUS Battery partnering with Kruvand Associates ZEUS Battery Products and Texas-based Kruvand Associates Inc. have come to a formal agreement on a collaboration that began in January and covers Texas, Arkansas, Oklahoma, Louisiana, New Mexico, Arizona and Mexico.
EPP with a new owner The company announces that is has found itself an ideal buyer – Photonics Systems Group – a manufacturer of micro-materials processing machines. With this takeover, PSG is strengthening is operations in the electronics industry and also laying the foundation for further growth.
Volkswagen starts pre-production e-mobility plant in China The new plant of the SAIC VOLKSWAGEN joint venture has been completed. It is purely built for the production of all electric vehicles on Volkswagen’s Modular Electric Drive Matrix (MEB).
Kongsberg Maritime divests KM Contros GmbH Following a strategic review, Kongsberg Maritime AS (KM) has decided to divest KM Contros GmbH (Contros) to AML Oceanographic Ltd. (AML).
SUSS MicroTec adjusts outlook for fiscal year 2019 Based on the preliminary figures for the first nine months and the updated budget figures, SUSS MicroTec is substantiating its expectations for incoming orders, sales and earnings for the current fiscal year ending December 31, 2019.
GPV's revenues soars 130% Danish EMS provider, GPV Group, announces that the company generated revenues of DKK 2.2 billion in the first nine months of 2019, a 130% year-on-year improvement driven by the acquisition of Swiss company CCS at the end of 2018.
Sponsored content by EsemdaContract manufacturer Esemda opens new facility in Vilnius and expands EMS The new facility has been built with reserved space for future expansions. As Esemda constantly grows, it is of great importance to be able to rapidly increase production capacity in large volumes.
Former GM plant now Lordstown Motors Corp. General Motors’ shuttered Lordstown plant in Ohio, which closed in March, is now in the hands of an electric truck start-up that is looking to begin production in about a year.
Chinese chip maker to U.S. firms: don’t worry On Friday, the chairman of China’s top state-run semiconductor company, Tsinghua Unigroup, had some advice for U.S. chipmakers, saying they should “relax and sleep well,” with regard to China’s semiconductor development.
POET closes the sale of DenseLight POET Technologies, the designer and developer of the POET Optical Interposer and Photonic Integrated Circuits (PICs) for the data center and tele-communication markets, has successfully closed the sale of its DenseLight subsidiary in Singapore.
HAHN Group expands its footprint in the US via acquisition Factory automation and robotics solution provider, Hahn Group, has acquired REI Automation, Inc. The takeover is effective as of 01. November 2019.
Sponsored content by Nordson ASYMTEKStart-to-finish conformal coating with reliability and efficiency Nordson ASYMTEK’s flexible, modular, Panorama™ S-Line delivers conformal coating process control in a space-saving footprint with overlapping line processes that minimize manufacturing floor space. This innovative, patent-pending line layout trims 50% of the line’s length by using the lower compartment in each piece of equipment for functional use. Combined with Nordson ASYMTEK’s global support, this complete conformal coating line delivers quality, product reliability, efficiency, and safety for all your conformal coating applications.
Ynvisible Interactive sells contract manufacturing services to Epishine Epishine is purchasing roll-to-roll manufacturing services from Ynvisible Production, combines solar cells with printed electronic displays.
QEV Technologies gets € 17 million from EIB The E-mobility and R&D specialist, QEV Technologies, will receive EUR 17 million funding from the European Investment Bank (EIB) for a variety of low carbon transportation projects.
Mouser pushing distribution to new (vertical) levels Mouser Electronics, global NPI distributor of semiconductors and electronic components, has expanded its multi-dimensional footprint at its distribution headquarters in Texas.
Micron buys FWDNXT, launches AI platform With its recent acquisition of hardware and software start-up FWDNXT, Micron Technology Inc. has launched a new set of tools for deep learning.
Sponsored content by NCAB Group Benelux B.V.Failure is not an option for a PCB More than 30% of the Gerbers NCAB Group Benelux B.V. reviews, have problems. However, the PCB are integrated in key end-user product with more and more High Tech PCB. We are here to support you on the new technologies growth to maintain a high reliability and quality. Contact us to review it together.
Isola names new president and CEO Isola has appointed Travis Kelly president and chief executive officer. Kelly most recently served as global chief operating officer at Cerberus Operations and Advisory Company (affiliate of Cerberus Capital Management).
CORE-emt to represent BTU in the Baltics BTU International, Inc., a supplier of advanced thermal processing equipment for the electronics manufacturing market, announces that it has expanded its partnership with CORE-emt to include the Baltics (Estonia, Lithuania, Latvia).
Kimball reports growth across the board for 1Q20 While the calendar year for 2019 isn’t over yet, Kimball Electronics has already completed its first fiscal quarter for 2020.
AT&S weathers market challenges In an overall challenging environment AT&S held its ground well in the first half-year. Revenues amounted to EUR 490.3 million, declined slightly by 5.1% compared to the previous year.
Sponsored content by SourcengineComponent Aggregators vs E-Commerce Marketplaces What is the difference between electronic component aggregators and a marketplace?
67% of a buyer’s journey is now done digitally. Learn how marketplaces emerged as full-cycle procurement platforms and challenged the traditional component aggregators.
Covalent Metrology, Rigaku extend partnership with new line Rigaku, a producer of X-ray metrology technology, has installed two of its analytical instruments at the Sunnyvale, California service lab of Covalent Metrology, a provider of analytical services to advanced materials innovation companies.
PG LifeLink expanding in Kentucky Post Glover LifeLink Inc., a manufacturer of isolated power products, announced plans to expand its operation in Boone County with a USD 3.9 million investment.
HELLA expands its activities in Lithuania HELLA Lithuania has been operating in the country for about a year and a half now. Now it's time to kickstart production of the next product group in the Lithuanian facility.
NCAB’s CEO to retire in 2020 Hans Ståhl, the CEO of Swedish PCB supplier NCAB, is planning to retire from the position as CEO in 2020.Load more news