Electronics Production | April 05, 2012
Top5 counterfeited parts
The Top5 most counterfeited parts represent a USD 169bn potential challenge fort the global semiconductor market.
The five most prevalent types of semiconductors reported as counterfeits that have widespread commercial and military use represent USD 169 billion in potential annual risk for the global electronics supply chain, according to information and analytics provider IHS. The five most commonly counterfeited semiconductor types are analog integrated circuits (ICs), microprocessors, memory ICs, programmable logic devices and transistors, based on data from IHS. Together, these five component commodity groups accounted for slightly more than two-thirds of all counterfeit incidents reported in 2011. Looking across the entire industry, the sum total of the application markets where these five most reported commodity groups are used represented USD 169 billion worth of semiconductor revenue in 2011, according to data derived from the IHS iSuppli Application Market Forecast Tool. These commodities are used widely throughout all major semiconductor applications, i.e., computing, consumer electronics, wireless and wired communications, automotive and industrial. As IHS recently noted, 2011 was a record year for counterfeit reporting, and incidents of counterfeit parts have tripled during the past two years. Counterfeit parts often are cheap substitutes or salvaged waste components that fail to meet quality requirements, leading to potential failures. “There has been a great deal of focus on the issue of counterfeit parts in the defense industry, but the majority of reported counterfeit incidents are for commercial components which have broad use across both military and commercial applications,” said Rory King, director, supply chain product marketing at IHS. “Take analog ICs, for example. One out of every four counterfeit parts reported are for analog ICs—components which are used in everything from industrial and automotive situations to wireless devices, computers, or consumer electronics. A single counterfeit could impact end products in any of these markets and the potential problem is pervasive, amounting to billions of dollars of global product revenue subject to risk.” According to the IHS iSuppli Application Market Forecast Tool which provides actual and forecast data by application market for semiconductor devices, the total global analog IC market was worth USD 47.7 billion in 2011. These components are critical to all major application markets, evident in the sales percentage taken by analog ICs in individual segments. For example, the wireless market generated 29 percent of global analog IC sales in 2011, amounting to USD 13.8 billion in revenue. The problem is almost as massive in the other market application markets. The consumer electronics segment in 2011 consumed $9.8 billion worth of analog ICs, or 21 percent of the global market. Automotive electronics amounted to USD 8 billion, or 17 percent; computing represented USD 6.7 billion, or 14 percent; industrial electronics was at $6.5 billion, or 14 percent; and wired communications was USD 2.9 billion, or 6 percent. “A faulty counterfeit analog IC can cause problems ranging from a mundane dropped phone call to a serious tragedy in the aviation, medical, military, nuclear or automotive areas,” King noted. “Furthermore, the excessive cost of rework, repair, and customer returns for component failures is significant. For the global electronics supply chain, tackling the problem of counterfeit and fraudulent components has become an issue of paramount importance.” For many organizations, addressing the costs and risks associated with counterfeits is not just important, it’s also regulated. On December 31, 2011, President Barrack Obama signed the H.R.1540: National Defense Authorization Act for Fiscal Year 2012. The act mandates that participants at all tiers of its global defense supply chain implement processes and systems to analyze, assess and act on counterfeit and suspect counterfeit electronic parts. While the top five most counterfeit or fraudulent parts represent a major portion of the counterfeit problem, multiple other types of devices also are vulnerable to counterfeiting and fraud. In all, IHS has data for more than 100 types of integrated circuits, passive components, electro-mechanical devices, and other parts with counterfeit incidents reported against them. “The industrial segment, which includes both military and aerospace devices as well as medical components, is a relatively minor consumer of the most prevalent parts that are counterfeited,” King said. “However, a failure of a substandard counterfeit component in this area can have catastrophic consequences,” King said. “Organizations can use the reports of counterfeit incidents reported by others, in order to be proactively alerted of actual problematic parts in circulation throughout the supply chain. This can help organizations to avoid, quarantine, or act upon counterfeits in time.”
Mycronic, Indium forge strategic partnership Indium Corporation has announced a strategic partnership with Sweden-based Mycronic, to develop no-clean and water soluble solder pastes for jetting applications.
SCHMID delivers PlasmaLine to Hofstetter PCB SCHMID announced it has installed the company’s first PlasmaLine comprising ICP etch & sputter deposition of its Korean JV SCHMID AVACO at Hofstetter PCB AG in Switzerland.
Cobot market to reach USD 9+ billion by 2025 A new report from Tractica is forecasting continued rapid growth for the global collaborative robot (cobot) market over the next few years, reaching revenue of USD 9.7 billion by 2025.
MixComm scores USD 8+ million in series B round New Jersey-based fabless semiconductor company MixComm has secured USD 8.6 million in series B funding led by existing investor, Kairos Ventures.
Sponsored content by Nordson ASYMTEKStart-to-finish conformal coating with reliability and efficiency Nordson ASYMTEK’s flexible, modular, Panorama™ S-Line delivers conformal coating process control in a space-saving footprint with overlapping line processes that minimize manufacturing floor space. This innovative, patent-pending line layout trims 50% of the line’s length by using the lower compartment in each piece of equipment for functional use. Combined with Nordson ASYMTEK’s global support, this complete conformal coating line delivers quality, product reliability, efficiency, and safety for all your conformal coating applications.
SIA elects 2020 leadership The Semiconductor Industry Association (SIA) Board of Directors has elected ON Semiconductor CEO Keith Jackson as its 2020 Chair and Qorvo CEO Robert Bruggeworth as its 2020 Vice Chair.
Si wafer shipments recede for fourth straight quarter Worldwide silicon wafer area shipments slid for the fourth consecutive quarter of 2019, according to the SEMI Silicon Manufacturers Group (SMG) in its most recent quarterly analysis of the industry.
Decline in Q4 DRAM contract prices lessens as buying momentum recovers According to the latest analysis from the DRAMeXchange research division of TrendForce, Q4 DRAM ASP is as of yet undergoing a slight QoQ decline, but this decline has shrunk down to 5%.
Technica forms growth-focused equity fund San Jose-based Technica USA has reached an agreement on an equity investment centered on future growth for the global PCB fab and assembly supplier.
IHS Markit: 5G economy in the trillions by 2035 The IHS Markit 5G Economy Study, commissioned by Qualcomm Technologies Inc., is forecasting that 5G will generate USD 13.2 trillion in sales enablement by 2035.
ZEUS Battery partnering with Kruvand Associates ZEUS Battery Products and Texas-based Kruvand Associates Inc. have come to a formal agreement on a collaboration that began in January and covers Texas, Arkansas, Oklahoma, Louisiana, New Mexico, Arizona and Mexico.
EPP with a new owner The company announces that is has found itself an ideal buyer – Photonics Systems Group – a manufacturer of micro-materials processing machines. With this takeover, PSG is strengthening is operations in the electronics industry and also laying the foundation for further growth.
Volkswagen starts pre-production e-mobility plant in China The new plant of the SAIC VOLKSWAGEN joint venture has been completed. It is purely built for the production of all electric vehicles on Volkswagen’s Modular Electric Drive Matrix (MEB).
Sponsored content by EsemdaContract manufacturer Esemda opens new facility in Vilnius and expands EMS The new facility has been built with reserved space for future expansions. As Esemda constantly grows, it is of great importance to be able to rapidly increase production capacity in large volumes.
Kongsberg Maritime divests KM Contros GmbH Following a strategic review, Kongsberg Maritime AS (KM) has decided to divest KM Contros GmbH (Contros) to AML Oceanographic Ltd. (AML).
SUSS MicroTec adjusts outlook for fiscal year 2019 Based on the preliminary figures for the first nine months and the updated budget figures, SUSS MicroTec is substantiating its expectations for incoming orders, sales and earnings for the current fiscal year ending December 31, 2019.
GPV's revenues soars 130% Danish EMS provider, GPV Group, announces that the company generated revenues of DKK 2.2 billion in the first nine months of 2019, a 130% year-on-year improvement driven by the acquisition of Swiss company CCS at the end of 2018.
Sponsored content by NCAB Group Benelux B.V.Failure is not an option for a PCB More than 30% of the Gerbers NCAB Group Benelux B.V. reviews, have problems. However, the PCB are integrated in key end-user product with more and more High Tech PCB. We are here to support you on the new technologies growth to maintain a high reliability and quality. Contact us to review it together.
Former GM plant now Lordstown Motors Corp. General Motors’ shuttered Lordstown plant in Ohio, which closed in March, is now in the hands of an electric truck start-up that is looking to begin production in about a year.
Chinese chip maker to U.S. firms: don’t worry On Friday, the chairman of China’s top state-run semiconductor company, Tsinghua Unigroup, had some advice for U.S. chipmakers, saying they should “relax and sleep well,” with regard to China’s semiconductor development.
POET closes the sale of DenseLight POET Technologies, the designer and developer of the POET Optical Interposer and Photonic Integrated Circuits (PICs) for the data center and tele-communication markets, has successfully closed the sale of its DenseLight subsidiary in Singapore.
HAHN Group expands its footprint in the US via acquisition Factory automation and robotics solution provider, Hahn Group, has acquired REI Automation, Inc. The takeover is effective as of 01. November 2019.
Sponsored content by SourcengineComponent Aggregators vs E-Commerce Marketplaces What is the difference between electronic component aggregators and a marketplace?
67% of a buyer’s journey is now done digitally. Learn how marketplaces emerged as full-cycle procurement platforms and challenged the traditional component aggregators.
Ynvisible Interactive sells contract manufacturing services to Epishine Epishine is purchasing roll-to-roll manufacturing services from Ynvisible Production, combines solar cells with printed electronic displays.
QEV Technologies gets € 17 million from EIB The E-mobility and R&D specialist, QEV Technologies, will receive EUR 17 million funding from the European Investment Bank (EIB) for a variety of low carbon transportation projects.
Mouser pushing distribution to new (vertical) levels Mouser Electronics, global NPI distributor of semiconductors and electronic components, has expanded its multi-dimensional footprint at its distribution headquarters in Texas.
Micron buys FWDNXT, launches AI platform With its recent acquisition of hardware and software start-up FWDNXT, Micron Technology Inc. has launched a new set of tools for deep learning.Load more news