Electronics Production | June 03, 2011
Excess semiconductor inventory served as a boon
Normally a cause for concern, excess inventory actually served as a boon for the global semiconductor industry in the first quarter, alleviating the severity of component shortages spurred by the Japan disaster, states IHS iSuppli.
Days of inventory (DOI) among chip suppliers—excluding memory companies—stood at an estimated 80.3 days at the end of the first quarter in 2011, up 1.1% from 79.4 days in the fourth quarter of 2010 and an increase of 9.1 days from the same period in 2010. This represented a two year high, with inventories reaching a level not seen since the first quarter of 2009, when DOI amounted to 82.4. “Efforts by suppliers to build inventory during the seasonally slow period from the fourth quarter of 2010 through the first quarter of 2011 proved to be fortuitous,” said Sharon Stiefel, analyst for semiconductor market intelligence at IHS. “These efforts resulted in a two- to-four-week cushion of raw materials, work-in-process goods and finished products, which came in handy when chip supplies were disrupted by the Japan disaster. While a large inventory overhang can be a negative development for the semiconductor industry—fueling excess supply, dampening pricing and reducing profits—it turned out to be a positive factor during the first quarter as the industry contended with supply shortages.” And because the Japan disaster occurred so late in the first quarter, with the quake hitting on March 11, the number of weeks of direct disruption to the supply chain was limited during the first quarter, Ms Stiefel added. DOI in the semiconductor channel has been climbing steadily since the third quarter of 2009, moving in tandem with a rise in inventory value dating back to the first quarter of 2010. Inventory value in the first quarter this year stood at an estimated USD 27.2 billion. Q2 benefits The second quarter also experienced a more muted effect from the Japan disaster than previously thought. Many semiconductor manufacturing facilities initially damaged or affected by lack of steady electricity supply have returned to normal operations, narrowing the negative impact on semiconductor revenue during the second quarter. And in cases where damage was severe, manufacturing has been transferred to other company facilities or to outside foundries. At Renesas Electronics, for instance, production from the company’s damaged facility in Naka was redistributed to other sites soon after the quake. Just the same, the company already is targeting a return to pre-disaster production levels by the end of July. Inventory levels at semiconductor suppliers are expected to continue to rise in the second quarter, IHS believes. The expansion will be intentional as companies prepare for increased demand in the second and third quarters, and the buildup in semiconductor stockpiles will not necessarily be driven by fears of component shortages. Supply problems ahead? Despite the inventory increase in the near term, the supply outlook becomes a bit less clear further in the future. “Once internal inventories dwindle, the pipeline may not be replenished quickly enough to meet all of the end demand, creating risks for participants in the supply chain,” Ms Stiefel warned. Inventory policies are being revisited as a result of the Japan disaster, as companies adhering to just-in-time (JIT) inventory strategies re-evaluate the potential loss of orders. Such order losses could be due to the inability to ship products because of a missing component or raw material, versus the cost savings realized by a JIT practice. Companies may find that customers are second-sourcing components due to the disaster—and potentially may lose a socket to a competitor in the ensuing fallout. Time will tell if recent global events such as the Japan crisis spur a permanent practice—as opposed to a merely temporary trend—in which additional inventory is held, serving as an insurance policy against unforeseen events that upend the markets.
Internal promotions and executive retirements at Kimball EMS provider, Kimball Electronics, has made two new internal promotions aimed at contributing to the company accelerating its strategic growth plans.
Kyocera & TMDU team up for research on vitals measurement headset Kyocera Corporation and Tokyo Medical and Dental University (TMDU) have teamed up on a joint research project to develop a wireless headset that can remotely monitor high accuracy patient biometrics, such as blood oxygen saturation (SpO2).
German battery manufacturer receives funding for cell production facility VARTA AG receives public funding of EUR 300 million for battery cell production facility.
Scanfil to streamline its factory network The EMS provider is planning to combine the production of its Hamburg factory with its other factories in Germany and Poland
Kitron awarded new order within measurement technology Kitron has been awarded new business for measurement technology. The award covers a period of five years, and the expected annual value is between EUR 3.5-5 million.
NORBIT ASA awarded aquaculture contract Norwegian technology manufacturer, NORBIT, has been awarded a new contract from an existing customer within the aquaculture market.
Saki strengthens its Asian operations The AOI specialist is expanding its global sales organisation with new Asia sales department, and appointing Katsuhiro Eddie Ichiyama as Senior General Manager for the Asian region
Scanfil to sell its plant in Hangzhou, China The board of directors of the Finnish EMS prover has decided to sell the entire share capital of its subsidiary located in Hangzhou, China, for a total of EUR 18.4 million to Hangzhou Cabinet Technology Co., Ltd.
Staying put during the COVID-19 pandemic TPCA (Taiwan Printed Circuit Association) announced the production and sales data for Q1 2020; the output value of Taiwan cross-strait PCB industry totalled NT$136.9 billion (approx. US$4.541 billion) in Q1/2020.
North American PCB industry sales up 1.0% in May Total North American PCB shipments in May 2020 were up 1.0 percent compared to the same month last year. Compared to the preceding month, May shipments fell 3.0 percent.
Sensirion expands with new production site in Hungary In a response to positive business trends and the increasing demand for its existing and new sensors, Sensirion is expanding its production capabilities by establishing a production site in Debrecen, Hungary.
Management Change at the Würth Elektronik eiSos Group After 27 years in the Würth Elektronik Group, Oliver Konz has decided to resign his position as Executive Vice President of the Würth Group and CEO of the Würth Elektronik eiSos Group for personal reasons and leave the company.
Kurtz Ersa inaugurates new production hall In Bestenheid, Germany, the company has just opened its new production and administration building. Following 24 months of construction and furnishing, the company now have access to 4’500 new square metres of space.
PCB industry: 1Q/2020 overshadowed by corona pandemic After a significant drop in sales at the end of last year, PCB manufacturers in the Germany, Austria and Switzerland (DACH) region recorded a sales growth of 16.1 percent in the first quarter of 2020.
Integration of ATLID completes European set of instruments for EarthCARE satellite With the successful integration of the ATLID-Instrument the EarthCARE satellite (Clouds Aerosols and Radiation Explorer) has passed a crucial milestone, as it concludes the "onboarding" of the three European instruments.
ABB Robotics rolls out Lexi’s procurement analytics solution Automation giant, ABB Robotics, is using a big data analytics software solution developed by Lexi Solution AB in Sweden to optimise procurement and engineering processes.
OHB placing the largest clean room in operation After only 14 months of construction, the PLATO hall has now been officially completed at space company OHB’s headquarters in Bremen. With a floor area of around 1,400 square meters, the ISO 8 cleanroom*, which is almost eleven meters high, is the OHB Group’s largest cleanroom facility.
Jenoptik expands military laser rangefinder capabilities in the US JENOPTIK Optical Systems, LLC has announced an expansion of its capabilities for military laser rangefinders (LRF) and is adding custom engineering and testing capabilities to their Jupiter, Florida facility.
Tesla plans battery manufacturing facility in California Electric car manufacturer Tesla plans to build a battery research and manufacturing facility in Fremont, California. N, to be operated around the clock, Under a project dubbed Roadrunner, documents from the city government also reveal a potential 24/7 operation at the facility.
Northrop Grumman awards contracts to Kitron Northrop Grumman has awarded Kitron a production contract for Integrated Communications, Navigation and Identification (ICNI) modules for the F-35 Lightning II program.
EPE Corporation invests in new equipment and doubles its capacity US-based EMS provider, EPE Corporation, has recently invested in its Surface Mount Assembly line capacity with the purchase of two new Mycronic MY300DX-17 pick-and-place machines, feeder systems and other line software upgrades.
CoreKinect partners with Benchmark on hardware for the IoT ecosystem EMS provider Benchmark Electronics and CoreKinect, a company focused on scalable hardware design, have entered into an agreement, aiming to enable customers across theIoT landscape to design, engineer, and manufacture products in the USA.
AVL opens competence centre for sensor tests in Bavaria One of the core tasks of the competence centre is to compare the results obtained in the laboratory with real data recorded in road traffic.
Top semiconductor suppliers defy weak market conditions in Q1 Defying a decline in market revenue, the world’s top-10 semiconductor suppliers managed to generate revenue growth of 2.1% in the first quarter, as the companies benefitted from a COVID-19-driven increase in PC and server sales.Load more news