Electronics Production | October 13, 2009
Electronics industry in early stages of recovery
The recovery is under way for the electronic equipment industry; however, much uncertainty continues to rest on the macroeconomic recovery and the effectiveness of government stimulus packages, especially when that stimulus runs out, according to Gartner, Inc.
As a result, Gartner does not expect a sustainable recovery pattern until 2010, and associated semiconductor sales are not expected to regain 2007 peak levels until 2012. “Almost all sectors of the electronic equipment market have now hit bottom and await signs of ‘first growth’ in comparison with the same quarter last year,” said Klaus Rinnen, managing vice president at Gartner’s semiconductor manufacturing group. “The first signs of growth will be led by seasonal buying patterns in the PC market during the third quarter of 2009, although other major sectors will not begin to show first growth, year-on-year, until 2010.” “Electronics vendors and their suppliers must give careful attention to the expected recovery pattern of each sector, and a separate response must be planned for each,” said Jim Tully, vice president and distinguished analyst at Gartner. “In particular, new product introductions should be synchronized with the expected sequence of the recovery.” Gartner has recently revisited its expectations for recovery in the electronic equipment industry, providing details by sector: PCs Gartner has found that there is little change in the PC sector recovery. Having bottomed in the first quarter of 2009, a sustainable recovery is pegged for the third quarter of 2010. The outlook for a PC recovery is influenced by depressed enterprise demand and the fact that IT spending is not expected to return until 2010. In contrast, home PC demand has held up better than expected, reflecting the way that consumers now value and use PCs, even in difficult times. The overall PC forecast has been revised up, especially for the United States and China, in light of this continued strength of the home PC market and the improving outlook for the global economy. Mobile Phones Originally anticipated to reach bottom in the third quarter of 2009, mobile phone production reached its low point in the first quarter of 2009. This market is now predicted to be the first sector to show sustainable recovery, starting in the first quarter of 2010. Improving fundamentals in the mobile phone market was a key driver in the upward revision, and Gartner now expects mobile phone unit production to decline only 8 percent in 2009 which is 4 percentage points less than the May 2009 forecast. The rebound has largely come from the demand for basic phones targeted at emerging markets, particularly China, and for smartphones, which continue to perform well as competition increases and prices come down. Wired Communications The wired communications market outlook has benefited from China’s infrastructure spending and an earlier than expected onset of recovery in the developed nations, causing Gartner to move forward the timing of the bottom and first growth by two quarters. However, growth will be relatively weak until 2011, meaning that the period between first-growth and sustainable growth markers could be better described as a period of stability rather than a rapid return to historical growth levels. Consumer Electronics Despite reasonable growth in LCD TVs and Blu-ray DVD players in 2009, many other categories have shown either flat sales with little or no growth, or declining revenue and unit shipments between the first and the third quarters. The consumer electronics market appears to be in a state of "limbo" and Gartner has pushed out first growth indicators to the second quarter of 2010. From the second quarter of 2010 onward, Gartner predicts greater stability but anticipates few signs of a return to prerecession growth rates occurring until the first quarter of 2011. Automotive Electronics The auto industry is still performing in line with Gartner’s expectations since the beginning of the year. Gartner predicts that semiconductor vendors will likely see improved demand for semiconductors from Tier 1 and Tier 2 suppliers, which will be reacting to increasing demand and new car purchase orders early in the first quarter of 2010. However, more evidence of recovery in the economy in general is needed before any strong growth trends can emerge for the automotive sector. “Although the first signs of recovery are starting to appear for the electronics industry, the damage from the current industry recession will be felt for a long time,” said Mr. Rinnen. “This is seen in our current five-year semiconductor revenue forecast, which does not show recovery to 2007 levels until 2012. Vendors must prepare for significant changes in consumer buying behavior, technology demand patterns and a changed supplier landscape.”
Another battery production facility to be built in Germany A new production facility for electric vehicle power solution provider, Microvast GmbH, is to be constructed by industrial developer, Panattoni Europe.
BMW is betting billions on e-mobility – awards massive battery contracts The BMW Group is forging ahead with electromobility and deepening its existing business relationships with battery cell manufacturers CATL (Contemporary Amperex Technology Co. Limited) and Samsung SDI.
UMS Skeldar gears up production volumes with Scanfil Close on the heels of German Navy and Royal Canadian Navy contracts UMS SKELDAR gears up production volumes as part of world navy strategy roll out.
Demand for preemptive 3Q19 DRAM shipment rises According to DRAMeXchange, demand-side inventory in 2H19 has returned to relatively healthy levels. Furthermore, some vendors pulled their quarterly product shipment forward in an effort to avoid potential negative impacts from Trump’s impending tariffs.
Sponsored content by EsemdaContract manufacturer Esemda opens new facility in Vilnius and expands EMS The new facility has been built with reserved space for future expansions. As Esemda constantly grows, it is of great importance to be able to rapidly increase production capacity in large volumes.
HANZA gets AS9100 certificate to supply aerospace industry Swedish manufacturing strategist, HANZA, says that its machining facility in Årjäng, Sweden, received its AS9100 certification, the standard that will allow HANZA to manufacture products for the aviation, space and defense companies.
NOTE continues to expand within medtech One of EMS provider NOTE’s Swedish manufacturing plants has received a first order of SEK 25 million (EUR 2.34 million) from a Swedish customer within the medtech segment. Delivery is scheduled for 2020.
Marvell layoffs in VT, NC and CA Days after the close of the acquisition of Avera Semiconductor on November 5, Marvell Semi filed a WARN notice with the State of Vermont, ahead of 78 permanent layoffs at its Essex Junction facility.
U.S. DoC extends Huawei license The United States Dept. of Commerce, through its Bureau of Industry and Security (BIS), has announced a 90-day extension of the temporary general license (TGL) to Huawei and certain non-affiliates.
Sponsored content by Z ElektronikaZ Elektronika opens new factory in Pécs To keep up with rapid growth of the company, on the 13th September Z Elektronika celebrated the grand opening of its new electronic design and manufacturing facility close to the highway in Pécs, Hungary, which adds new features and production site to its nearby location.
Apple: Shovels up in Austin As part of its expansion plan in Texas, Apple has announced the beginning of construction at its new campus in North Austin.
PARPRO makes NA capex investments Southern California-based PARPRO has made capital equipment investments scheduled to be operational this quarter at the company’s Mexico and California facilities.
Indium Corporation is ready for 2020 Chris Nash from Indium Corporation reviews 2019 - in many ways, a strange year. However, even with the geopolitical issues that the year has offered, Indium has done a good job staying on top of things.
Schmoll Maschinen GmbH settles for a record year Schmoll's soaring results for 2019 is tied to the high level of globally deployed machines, where Asia takes the lead.
Arch Systems partners with Flex for manufacturing data transformation Arch Systems, a provider of a machine-data-sensing platform, has entered into an agreement with global manufacturer Flex to supply real-time access to and analysis of manufacturing data at its facilitie
ZF and Wolong Electric form JV for electric motors ZF Friedrichshafen and China’s Wolong Electric Group are stepping up their existing cooperation. The two companies have signed an agreement to establish a joint venture that will produce components and electric motors for automotive applications.
Cicor on its venture into printed electronics In the first quarter of 2019, Swiss EMS provider, Cicor, opened a technology center for printed electronics at the Bronschhofen site in Switzerland - quite the investment and a completely new territory for the company. Evertiq had the opportunity to talk to Karl-Heinz Fritz, VP of Technology, about the strategy behind this.
TT Electronics steps up its US presence – acquires Excelitas unit TT Electronics has struck a deal to acquire a US based business that designs and manufactures power electronics for defence and aerospace markets, enhancing its ability to engineer complete power converters.
ABB partners with Exeger to speed up transition to clean energy ABB has entered into a new partnership with Sweden’s Exeger Operations AB. The partnership will enable Exeger to enhance the production quality its photovoltaic material at the company's Stockholm factory and also develop automation solutions for its new fully automated factory which will begin construction in the near future.
Rehm Thermal Systems intros 3-in-1 reflow solution Michael Hanke from Rehm Thermal Systems shows off the results of the company's development work.
Intel to reclaim No.1 semiconductor supplier ranking in 2019 IC Insights says that only three among the top-15 semiconductor suppliers are forecasted to show growth this year.
Veoneer joins Autonomous Vehicle Computing Consortium Veoneer has joined the Autonomous Vehicle Computing Consortium (AVCC) to speed autonomous driving vehicle development.
Ongoing trade issues have opened up Chinese market for Viscom According to Carsten Salewski, Chinas move towards more independence has resulted in more customers from the region; especially within the automotive sector.
Don't forget about human inclusion in industry 4.0 Michael Ford from Aegis Software is reminding the industry in the midst of connectivity that our most powerful asset is still the human employee.
East West Manufacturing acquires Adcotron EMS East West Manufacturing has acquired Adcotron EMS, a provider of specialized electronics manufacturing services, including advanced printed circuit board assemblies, box-build assemblies, testing, and new product introduction services.Load more news