Electronics Production | July 17, 2009
Semiconductors for Cool Computers
Computers with no need of cooling? They haven't come into existence yet. However, physicists of the University of Würzburg are paving the way for them: In the American scientific journal "Science", the researchers now present a semiconductor that transmits electric current without heating up in the process.
This new type of semiconductor consists of mercury telluride and mercury cadmium telluride. In a sophisticated procedure, the Würzburg physicists apply these two materials to penny-sized crystal wafers in alternate ultra-thin layers. "The individual layers are only seven to ten nanometers thin," says Professor Laurens Molenkamp. In other words, inconceivably fine: A nanometer is one millionth of a millimeter. Tiny wire fabricated In order to analyze the conductivity of the layered material, the physicists structured its surface, using lithographic patterning methods. They sort of created tiny wires in a specific pattern, e.g. an H-shaped structure. "The material was expected to become an insulator under certain conditions - at very low temperatures, for instance. All conventional semiconductors exhibit this behavior," explains Professor Hartmut Buhmann, who works in Molenkamp's team. Material reacted in an unexpected way The physicists were in for a surprise, when the material behaved differently: The electrons concentrated at the edges of the H-shaped structure. In addition to this, they were freely moveable there - without any resistance and thus without dissipating heat. According to the physicists, this characteristic is based wholly on the materials and the way they are layered. The form of the structure - whether H or X - is irrelevant. Not yet ready for application This new type of semiconductor is not yet ready for real-world applications, though. The effect described above occurs only at extremely low temperatures below minus 170 degrees Celsius. Therefore, the Würzburg researchers now intend to develop other materials, which produce the same effect at significantly higher temperatures. "We are going to use bismuth compounds for this purpose," says Laurens Molenkamp. However, they first have to work out a procedure allowing them to stack these materials as well in neat wafer-thin layers. Using this H-shaped structure, the physicists of the University of Würzburg have established that their new type of semiconductor material transmits electric current without heating up in the process. To stay cool is important for computers When computers are processing, they heat up. But if temperatures get too high, the function of computer chips is adversely affected, which means they need cooling. The cooling is provided by fans on board the PC or by air conditioning systems in large computer rooms. Some high-performance computers of today are already equipped with water-cooling systems. So heat is a factor that considerably limits the development of faster computers. This is because more and more transistors, working ever faster, have to be tightly packed on the chips in order to reach higher levels of performance. "Consequently, a higher amount of electric current passes through the chips, inducing an increased heat build-up in the components," explains Hartmut Buhmann. Hence, the advent of components that conduct electric current without generating heat would be likely to give a big push to the evolution of computers. ----- The findings are presented in: Nonlocal Transport in the Quantum Spin Hall State, Andreas Roth, Christoph Brüne, Hartmut Buhmann, Laurens W. Molenkamp, Joseph Maciejko, Xiao-Liang Qi, Shou-Cheng Zhang, Science, 17. Juli 2009, Vol. 325, no. 5938, pp. 294-297, DOI: 10.1126/science.1174736
Big Ass Fans adds third Hentec/RPS machine Complementing the purchase of two Hentec Industries/RPS Automation Vector 300 selective soldering machines in 2018, Big Ass Fans (BAF), a high-volume, low- speed (HVLS) airflow manufacturer, has just added a third machine to its factory in Newman Lake, Washington.
CE3 Electronics Inc. taps MIRTEC for 3D AOI technology Canada-based CE3 Electronics has purchased a MIRTEC MV-6 OMNI 3D AOI machine.
Gémosz is still looking to grow – but the pandemic brought new perspectives Winston Churchill famously said, “Never let a good crisis go to waste”. While this was said in a vastly different context than the current crisis of the COVID-19 pandemic, there is still truth to the fact that a crisis not only allows for change – but sometimes forces it.
North American PCB industry sales up 4.3% in April The IPC says that total North American PCB shipments in April 2020 were up 4.3% compared to the same month last year. Compared to the preceding month, April shipments fell 18.2%.
Volkswagen intensifies e-mobility activities in China Volkswagen has initiated the next chapter for its business in China. The automotive giant plans to increase its share in JAC Volkswagen, its joint venture for e-mobility.
GPV Selects Aegis as global smart factory partner Driven originally by accelerating customer expectations for traceability, GPV has selected Aegis’ FactoryLogix Smart digital manufacturing solution, targeting multiple values and benefits.
REDCOM EMS expands certification for medical device manufacturing New York-based REDCOM EMS has secured ISO 13485:2016 certification, complementing the company’s existing ISO 9001:2015 and AS9100D certifications.
Ozark Integrated Circuits nabs U.S. Air Force grant Arkansas-based Ozark Integrated Circuits Inc., located in the Arkansas Research and Technology Park at the University of Arkansas, has received a USD 750,000 award from the U.S. Air Force.
Norwegian EMS adds employees to Polish unit The last couple of months Norautron has welcomed three new colleagues at its office in Sdunska Wola, Poland.
Daimler’s battery production in Kamenz gradually increases production Local battery production is described as an important success factor for Mercedes-Benz AG’s electric offensive and a key element to flexibly and efficiently meet the global demand for electrified vehicles.
Tepcomp invests in new additional production line Finnish EMS provider, Tepcomp Group, has made a significant investment at its production plant in Turku. The new surface mount technology production line will significantly improve the productivity and energy efficiency of the plant.
Valoe is on schedule with both production and expected deliveries Valoe says it will start manufacturing IBC test modules in Juva, Finland in June and cell deliveries from Lithuania to customers is scheduled to start according to plan.
AMTE Power and Britishvolt sign MoU for GigaFactory AMTE Power and Britishvolt plans to investigate collaborating to build the UK’s first full cycle battery cell GigaPlant, servicing the automotive and energy storage markets.
ALLPCB’s new SMT factory has launched production On May 10 2020, ALLPCB’s new – self-operated – SMT factory in Guangde, Anhui Province, China was officially put into production.
Schweizer starts production at its new location in China Following a construction period of one and a half years, production has now started at the company’s new high-tech printed circuit board plant in Jiangsu, China.
Jenoptik supplies generators to a US customer Through its Vincorion investment, Jenoptik received a long-term order for generators that an unnamed US customer is integrating into military vehicles.
Rolls-Royce takes heavy hit from COVID-19 – reduces workforce by 9000 The impact of COVID-19 on Rolls-Royce and the whole of the aviation industry is unprecedented. RR has already taken action to strengthen the financial resilience of its business and to reduce cash expenditure in 2020. However, this will not be enough.
Data Link Solutions to provide MIDS cabinet terminals to US Navy The U.S. Navy has awarded a USD 3.2 million production contract to Data Link Solutions (DLS), a joint venture between BAE Systems and Collins Aerospace, for new Multifunctional Information Distribution System (MIDS) cabinet terminals.
Incap restarts production in India In a move to contain the COVID-19 pandemic, the government of India instructed all state governments to introduce a lockdown in March. As a consequence, Incap had to close its factory in Karnataka, India on 23 March.
NAND Flash Revenue Undergoes 8.3% QoQ Growth in 1Q20 NAND Flash bit shipment in 1Q20 was relatively on par with 4Q19, says the DRAMeXchange research division of TrendForce. The overall ASP of NAND Flash products also climbed during the period. As a result, the global NAND Flash revenue for the quarter went up by 8.3% QoQ to USD 13.6 billion.
Gorenje reduces the number of layoffs At the end of April, due to a sharp drop in orders and revenues as a result of the COVID-19 pandemic, the Hisense Europe Group launched a redundancy program in four companies in Slovenia.
NA semiconductor equipment industry posts April 2020 billings North America-based manufacturers of semiconductor equipment posted USD 2.26 billion in billings worldwide in April 2020 (three-month average basis), according to SEMI.
AWS Electronics to wear the Incap name Following the acquisition of AWS Electronics Group by Incap Corporation in January 2020, the company's units in the UK and Slovakia will now be trading as Incap Electronics UK Ltd. and Incap Electronics Slovakia s.r.o.Load more news
- COVID-19 highlights the gravity of the secondary market for SME
- Rolls-Royce takes heavy hit from COVID-19 – reduces workforce by 9000
- China falls far short of its "Made-in-China 2025" goal
- Data Link Solutions to provide MIDS cabinet terminals to US Navy
- GlobalFoundries to implement ITAR at US manufacturing facility