Electronics Production | August 11, 2008
Large area transistors benefit from quantum effects
The Hitachi Central Research Laboratory and the Advanced Technology Institute (University of Surrey) report that nano-designed transistors for the large area display and sensor application field benefit hugely from quantum size effects.
The unexpected superior switching performance (low leakage current, and steep sub-threshold slope) shown experimentally and analysed theoretically, demonstrate hitherto unexplored routes for improvements for transistors based on disordered silicon films. By making the conduction channel in these disordered transistors very thin, the team has shown this technology will enable the design of low power memory for large area electronics based on a low-cost industry standard material processing route. In the most recent investigations, the current of the devices, is found to be percolation governed when the channel is thinner than 3.0 nm due to strong quantum confinement induced potential variations over the active channel region. It is shown that the device channel width must be at least 0.3 µm to avoid percolative “pinch off” for 0.5 µm channel length devices. Theoretical analysis performed on the devices agrees well with the experimental data and provides important guidelines to model and optimize the devices for circuit design. Dr Xiaojun Guo, one of the lead investigators, comments: “The nano-structure silicon thin-film transistors are very promising for design of low power electronics. However, carrier transport in such devices is very complicated, and results in electrical characteristics that may not be described by conventional field effect transistor (FET) models. This work reveals the key physical properties of the devices, which will help to further optimize and model the devices for circuit design”. Professor Ravi Silva, Director of the Advanced Technology Institute adds: “This study is a prime example of how leading silicon technologies entrenched in industry can find alternative routes to improve on performance in device characteristics by clever design. The role that funding organizations such as EPSRC play in supporting this type of applied research is invaluable to the community and most importantly to industry”.
GM: Detroit-Hamtramck to be EV assembly only GM announced today a USD 2.2 billion investment at its Detroit-Hamtramck assembly plant that will make it the automaker’s first facility completely dedicated to EV auto assembly.
Indra opens massive radar factory as it concentrates its manufacturing The new factory, located in San Fernando de Henares, will concentrate the company’s entire radar manufacturing for civil and military use.
New production lines installed at ESCATEC Penang Several new production lines are being set up at the company’s main facility in Penang, which hosts ESCATEC Electronics (EEM) and ESCATEC Medical (EDM).
Greg Grace takes the helm as MD of Incap Estonia Greg Grace has been appointed Director, Operations Estonia, and Managing Director of Incap Electronics Estonia, and member of Incap Group’s Management Team.
NA semi equipment industry posts December 2019 billings North America-based manufacturers of semiconductor equipment posted USD 2.49 billion in billings worldwide in December 2019 (three-month average basis), according to SEMI.
NOTE increases deliveries to Hövding Hövding 3, the latest version of the company’s airbag helmet, is fully ramped up at NOTE’s plant in China.
Eguana inks deal for residential energy storage systems Eguana Technologies Inc. has entered into a development contract with an unnamed renewable energy company to develop and certify proprietary residential storage systems for distribution through its sales channels across global markets.
BlueRing Stencils picks up Stone Mountain Tool BlueRing Stencils has acquired Georgia-based tooling supplier Stone Mountain Tool.
Bosch increases its stake in fuel-cell expert Ceres Power Bosch has increased its stake in Ceres Power from 3.9% to circa 18%. Bosch’s total investment in the company will be approximately 90 million euros.
Haldex Heidelberg staff urges management to reconsider the closure It was back in October of 2019 that Haldex announced that it was streamlining its production in Europe, a decision that would see the move of production from Heidelberg in Germany to Szentlörincskáta in Hungary.
Foxconn’s Gou: WI plant operational this year Foxconn Technology Group founder Terry Gou is indicating that the company’s new manufacturing facility in Mount Pleasant, Wisconsin, still currently under construction after multiple slowdowns, will generate products beginning this year.
Zentech acquires Trilogy Circuits LLC Zentech Manufacturing has acquired Texas-based Trilogy Circuits LLC, a provider of EMS services to military primes and other high-reliability industries in Texas and across the United States.
Markus Jeck to take lead of Enics Switzerland EMS provider Enics has appointed Markus Jeck as the new General Manager of Enics Switzerland.
Hanwha Precision Machinery launches tech centre in Germany Hanwha Techwin Automation Americas' – formerly Samsung C&T Automation – unit, Hanwha Precision Machinery, has launched an integrated tech centre for Europe in Germany to accelerate its global expansion.
TTM Technologies to sell four China manufacturing plants TTM Technologies is executing a definitive agreement under which the company has agreed to divest its four China manufacturing plants – which make up substantially all of the assets of its Mobility business unit.
Incap acquires AWS Electronics EMS provider Incap has signed an agreement to acquire 100% ownership of AWS Electronics Group.
Ampleon, Rochester Electronics ink deal RF power products supplier Ampleon and semiconductor manufacturer Rochester Electronics have forged a strategic partnership to extend the global supply of Ampleon’s VDMOS portfolio of high-performance RF transistors.
Trust Automation appoints new COO California-based Trust Automation Inc., a supplier of automation technology for industrial and defense applications, has welcomed Teddy Ross to the company as chief operations officer, effective immediately.
TDK Ventures invests in SLD Laser TDK Ventures Inc., a subsidiary of TDK Corporation, has invested in SLD Laser, a specialist in the use of gallium nitride (GaN) in the commercialization of visible laser light sources for multiple applications including automotive, mobility, medical, and specialty lighting.
Sono Motors hits its target - community funding works The Munich-based mobility provider Sono Motors has successfully completed the extension of its campaign to finance the company and has exceeded its target of EUR 50 million.
New group structure at Mycronic aimed securing future growth Swedish creator of production equipment, Mycronic, has grown quite a bit during the last years; both organically but also through acquisitions. And with that growth some structure is in order.
Zenuity and HP Enterprise team up to develop next-gen autonomous driving cars Hewlett Packard Enterprise (HPE) has been selected by Zenuity, a Swedish developer of software for self-driving and assisted driving cars, to provide the crucial artificial intelligence (AI) and high-performance computing (HPC) infrastructure it needs in order to develop next generation autonomous driving (AD) systems.
Honeywell, Lockheed Martin win NASA contracts Honeywell and Lockheed Martin have both announced recent contracts for the supply of key components to NASA’s Orion spacecraft fleet for the upcoming Artemis lunar missions.Load more news