© Recab Embedded | January 11, 2021
Recab expands via the acquisition of Synective_Labs
Swedish embedded specialist, Recab, is investing in FPGA and ASIC design via the acquisition the high performance embedded design company Synective Labs
The acquired company is specialised in high performance systems, creating optimised hardware and software designs within FPGA and ASIC designs. Synective Labs will be part of the Recab Group as a daughter company. As pointed out Recab in a press release, the embedded industry is rapidly moving towards high performance computing, enabling machine learning and artificial intelligence at the edge. High performance embedded computing, accelerated by GPU, FPGA or ASIC is a key factor in demanding image and signal processing systems. The synergies between the two companies will reinforce Recab Groups’ ability to deliver turnkey embedded solutions for the future. "Synective Labs’ extensive competence in FPGA design, algorithms for image and signal processing, machine learning and artificial intelligence, complements Recab’s broad experience within industrial automation, sensor, vision, computer and communication systems for extreme environments and demanding applications," says Carolin Burlin CEO of Recab, in the press release. "The cooperation with Recab and the Addtech Group provides Synective Labs access to new markets and end customers, but even more exciting the opportunity to work in new teams and additional disciplines with the goal to jointly deliver more complete customer solutions," adds Niklas Ljung, CEO for Synective Labs. Synective Labs will continue its successful operation as an independent entity, working with existing customers and partners.
Moov attracts funding from Mark Cuban, NFX and more Moov, a marketplace for pre-owned manufacturing equipment, has added USD 2 million in investments from venture capitalist firm NFX, Mark Cuban, Nat Turner, and Zach Weinberg, co-founders of Flatiron Health, and other strategic angels.
Sponsored content by Shenzen Kinwong ElectronicThe development trend of printed circuit board products and Kinwong's solution With the rapid development of electronic technology in recent years, printed circuit board (PCB) products are pursuing higher heat dissipation capabilities, with high voltage and high current characteristics, and are developing towards high-density interconnection technology (HDI).
GlobalFoundries to invest $1.4 billion to increase its output The semiconductor foundry is planning to invest USD 1.4 billion in order to increase production at three of its manufacturing facilities located in Germany, Singapore and the US.
NAND Flash revenue shows mere 2.9% QoQ decline in 4Q/20 The quarterly total revenue of the NAND Flash industry came to USD 14.1 billion in 4Q20, showing a QoQ drop of 2.9%, according to TrendForce’s latest report.
David versus Goliath - Europe's standing on the global market Europe's world market share of electronics is falling and is on its way to 8%. To put this in perspective, Apple and Samsung each claim the electronics annual demand of all of Europe - a single company as much as all of Europe!
Hirose Electric USA names new president and COO Hirose Electric USA has named Shinya (Sid) Tono as its new President/COO effective April 1, 2021.
Linton expands in China - increases capacity amidst shortage Last month, Dalian Linton NC Machine opened a more than 70'000 square metre research and design center and manufacturing base in Xishan, Wuxi, China.
Harman acquires 5G Edge and V2X specialist Savari Samsung subsidiary, Harman International, is acquiring Silicon Valley-based automotive technology company, Savari, a developer of vehicle-to-everything communications (V2X) technology in 5G Edge and automotive devices.
Marvell and Fujitsu partner to deliver 5G baseband technology Fujitsu has selected Marvell's baseband processor silicon to power its new 5G New Radio (NR) base station offerings.
With the shortage still weighing heavy ADI delays fab closure In January Evertiq reported that Analog Devices was planning to permanently close its facility Milpitas, California.
Tower Semi invests to expand its manufacturing capabilities The company is planning a capacity expansion for 200mm and 300mm to answer the exceeding demand forecast.
Synchronous Rectification on the Secondary Side Question: How can I increase the efficiency of my isolated power supply?
Biden to push for $37 billion to boost chip manufacturing US President Joe Biden has responded to the industry’s call to reinvigorate domestic semiconductor manufacturing. The president is pushing a USD 37 billion bill to identify solutions to the semiconductor shortfall.
Kioxia starts the expansion of its Yokkaichi Plant Kioxia has started the construction of new fabrication facility at its Yokkaichi plant, located on the Mie Prefecture, Japan, to support the production of sixth-generation 3D flash memory.
Mycronic receives US order for two SLX systems The Swedish technology company has received an order for two SLX mask writers from an unnamed, but existing customer in the USA. The total order value is between USD 8 and 12 million.
HP to acquire HyperX in a $425 million HP Inc. has entered into a definitive agreement to acquire HyperX, the gaming division of Kingston Technology Company, for USD 425 million.
TSMC ranks in Top10 in three wafer size categories As of December 2020, only TSMC—the world’s largest foundry—was listed among the wafer capacity leaders in each of the three wafer size categories. It had the most 200mm wafer capacity last year and ranked second, trailing only Samsung, in 300mm wafer capacity.
SK Hynix ink $4.3 billion deal with ASML The Dutch supplier of semiconductor equipment has signed a five-year long deal, worth USD 4.3 billion, with SK Hynix as the South Korean company works to secure equipment to boost it output.
Microchip invests $20M in new Irish development centre Up to 200 new engineering jobs will be created in Cork, Ireland as Microchip Technology invests USD 20 million to create a new development centre.
Explosive growth in Automotive DRAM demand expected Driven by such factors as the continued development of autonomous driving technologies and the build-out of 5G infrastructure, the demand for automotive memories will undergo a rapid growth going forward, according to TrendForce’s latest investigations.
Renesas Naka facility is back to full operation Following the earthquake that hit the coast of Fukushima Prefecture and the surrounding areas on February 13, Renesas shut down production at its Naka factory to investigate potential damages. Since then then company has brought the plant back online bit by bit.Load more news