© balint radu dreamstime.com Products | May 24, 2018
Rich diagnostics for smart automation from STMicro
The STMicroelectronics IPS4260L quad low-side intelligent power switch boosts efficiency and reliability in industrial automation, with four 260mΩTYP RDS(ON) power switches and protection features in a space-efficient, thermally enhanced package.
This is a product release announcement by STMicroelectronics. The issuer is solely responsible for its content.
The IC can manage up to 2.4A@TAMB=85°C (0.6A per channel or 2.4A on single channel) with the possibility to set current limitation threshold by external resistor and to parallelize the channel. The very low rise and fall time (tr, tf < 1μs) allows high switching frequency (up to 250kHz) and makes it ideal for servo drives, motor controls, industrial-PC peripherals, programmable logic controllers (PLCs), and general low-side switching of loads connected to the positive supply, the IPS4260L provides rich diagnostics for Smart Industry / Industry 4.0 smart-manufacturing applications. The diagnostic features include open-load detection that operates while outputs are in the off state, which prevents hazards due to failures such as wire breaks. In addition, current limiting with non-dissipative cut-off shuts down the output stage after a user-selectable period in the event of over-current. An external resistor determines the limiting period, and restart is attempted automatically. In order to ensure quick response even with inductive loads (such as motors), ST’s new power switch integrates a smart architecture for fast demagnetization feature based on a single external clamp diode shared between the four channels. Further diagnostic features include two common open-drain pins for indicating open-load and overload/thermal-shutdown, and four input/output open-drain pins for per channel overload/thermal-shutdown signalization. An extensive ecosystem supports the IPS4260L as a member of ST’s extensive family of intelligent power switches. It includes a dedicated graphical user interface (STSW-IFP029GUI) for configuring the device, a detailed user manual (UM2297), and the STEVAL-IFP029V1 highly developed evaluation board. The board meets international safety standards for industrial equipment, with galvanic isolation between logic and power stages, reverse-polarity protection, and compliance with EMC regulations and IEC61000-4 specifications. The IPS4260L is in production now, in miniaturized HTSSOP20 Thermally Enhanced Thin Shrink Small-Outline Package, priced from $1.58 for orders of 1000 pieces. For further information, please visit www.st.com/ips.
ROHM presents Rear Lamp 4ch Linear LED Drivers designed for Motorcycles ROHM announces the availability of a 4ch linear LED driver IC with built-in MOSFET ideal for LED rear lamps (turn/stop), fog lamps and turn signals for automotive use.
Leuze’s construction project is making progress Almost seven months after the groundbreaking ceremony for the new distribution center in Unterlenningen, Germany, Leuze is making good progress and is on schedule.
NXP: ‘the impact of COVID-19 was greater than anticipated’ The semiconductor company has updated its performance expectations for the first quarter as the business impact from COVID-19 has proven to be greater than initially anticipated.
Unprecedented power density in low-voltage power conversion systems Each time a power MOSFET is being turned on or off in a SMPS, parasitic inductances produce ground-shifts that may cause false triggering of the gate-driver IC.
Nordic Semi expands and opens new office in Australia With the newly opened sales, marketing and customer support office for Southeast Asian, Nordic Semiconductor aims to provide faster customer support to the regions expanding wireless electronics design and manufacturing sectors.
Osram appoints new Chief Financial Officer Osram Licht AG has appointed Kathrin Dahnke as a member of the Management Board. Effective April 16, she will be responsible for the financial business of the high-tech company.
u-blox acquires IoT communication-as-a-service provider thingstream u‑blox has acquired IoT Communication‑as‑a-Service provider, Thingstream. Thingstream provides an end‑to‑end solution for global IoT connectivity using the industry standard MQTT protocol.
Tachyum opens new EU headquarters in Slovakia The semiconductor startup has opened a new European Union headquarters to address the regional needs of its growing number of customers, partners, vendors throughout the EU.
EtherCAT interface option added to programmable DC power supply series TDK Corporation (TSE 6762) announces the introduction of an EtherCAT interface option to all models in the GENESYS+™ series of programmable DC power supplies.
MaxLinear to acquire Intel division MaxLinear, along side its subsidiary, have entered into a definitive agreement with Intel Corporation under which MaxLinear would, subject to customary closing conditions, acquire Intel’s Home Gateway Platform Division for USD 150 million.
America II: 'we remain open for business' The situation surrounding the COVID-19 pandemic continues to evolve, and doing so rapidly. Globally we’re seeing nations and governments react with recommendations and restrictions to movement and business operations – and companies are reacting.
Infineon receives final green light for its acquisition of Cypress Infineon says it has received all necessary regulatory approvals for its acquisition of Cypress Semiconductor. Infineon expects to close the transaction within five business days.
Schurter updates on the impact of COVID-19 Continued travel restrictions, the shut-down of borders and whole cities and other similar events have created unanticipated labour, logistics and material shortages throughout the world.
COVID-19 case at Fukui Murata Manufacturing’s plant On April 4, Murata Manufacturing, confirmed that an employee at the Takefu Factory of Fukui Murata Manufacturing has tested positive for COVID-19.
Cree: COVID-19 has had a greater impact than first anticipated Cree says that the COVID-19 pandemic has had a greater impact than originally anticipated when the company provided the third quarter outlook back in late January.
Hirose expedites shipment of medical equipment manufacturers Connector solutions manufacturer, Hirose, says it is prioritising and expediting orders to medical equipment manufacturers.
Short-time work starts at Elmos Elmos will start with the previously announced short-time work in mid-April. Associated with this, the Management board and executives will voluntarily waive a part of their remuneration.
Hirose’s Malaysian factory has been temporarily closed The connector company had to temporarily close its operations in Malaysia on March 18 following a government order. The order is a precautionary measure against Covid19 and is affecting most of the country’s industries.
COVID-19: Vishay provides operational update The manufacturer of discrete semiconductors has provided an update on the operational status of its manufacturing facilities amidst COVID-19 pandemic.
Axcelis receives its first order For Purion in Japan Axcelis Technologies, a supplier of high-productivity solutions for the semiconductor industry, says it has received an order to ship its first Purion system into Japan.
NXP invests in Kalray An EUR 8 million equity investment to strengthen partnership between the companies who will co-develop, jointly promote and deploy autonomous driving solutions on the market.
SEMI urges ‘essential business’ designation of semi companies SEMI has urged government representatives around the U.S. and world to designate the semiconductor industry as an essential business so operations at companies across the chip supply chain can continue without interruption as the spread of COVID-19 continues.
Digi-Key inks distribution partnership with Siglent Technologies Digi-Key Electronics has expanded its product portfolio by signing a North American distribution partnership with Siglent Technologies, providing its customers with electronic test and measurement solutions.
Jenoptik supplies infrared optics to Rheinmetall The photonics group Jenoptik will supply infrared optical components to Rheinmetall between 2020 and 2025.Load more news