© rawpixelimages dreamstime.com Business | May 14, 2015
JSR and imec partner on EUV lithography resist solutions
JSR Corporation and imec have signed a Letter of Intent (LOI) to partner. Aim is to "enable manufacturing and quality control of EUV lithography materials for the semiconductor industry".
This partnership will be formalized by establishing a joint venture with imec as minority shareholder. EUV lithography is considered as one of the main drivers to extend Moore’s law towards single digit nanometer technology nodes. Imec and JSR’s collaboration, will allow both companies to leverage their strengths when developing photoresist solutions for the semiconductor industry to manufacture the most advanced devices. JSR will provide manufacturing technology to the joint venture including upgrading the facility at its wholly-owned subsidiary in Belgium, JSR Micro NV, by installing manufacturing and analytical equipment. Imec will provide expertise and services to the joint venture for quality control on materials. In addition to the manufacturing of JSR brand photoresists, the joint venture will offer toll-manufacturing capability to other material suppliers with confidentiality secured. “JSR has been a strategic partner of imec for a long time, and I am excited with this intensified collaboration,” stated Luc Van den hove, president and CEO at imec. “This collaboration strengthens our supplier hub concept, a neutral open innovation R&D platform that involves suppliers more deeply and at an early stage of process step and module development. The partnership enabled through close proximity between the JSR manufacturing facility and the imec technology platform will allow our partners to gain access to best-in-class materials for next-generation technologies.” “We know that EUV lithography is required to realize Moore’s law in semiconductor manufacturing technologies and we continuously focus our R&D efforts to meet industry needs,” said Nobu Koshiba, President of JSR Corporation. “JSR has successfully developed not only chemically amplified photoresists, but also newly designed chemistries with very high sensitivity and good productivity. Our strength has also extended to peripheral materials, such as multilayer materials. The industry is requesting material suppliers to prepare manufacturing infrastructure and quality control capabilities for defect-free lithography solutions, as well as to improve photoresist performance to match EUV exposure equipment. It is by knowing those industry needs and requirements very well, that we, two world leading organizations that have supported the semiconductor industry for a long time, come to this unique idea to form a manufacturing joint venture to support those future industry needs. This is done based on our very long, trust-worthy relationship with imec. This is a very exciting challenge for us and I have great respect for imec for their brave and challenging spirits.”
Nuvia closes series A, eyes data center servers Santa Clara semiconductor design startup Nuvia Inc., formed earlier this year by three former top Apple Inc. design executives, has closed its series A round with USD 53 million secured.
Ingun's going global; expands in Latin America and Eastern Europe Benjamin Sontag (INGUN Prüfmittel GmbH) gave a short update on expansion plans in Latin America and Eastern Europe.
Yageo to acquire KEMET in a $1.8 billion deal Yageo Corporation and KEMET Corporation have entered into a definitive agreement under which Yageo will acquire all of the outstanding shares of KEMET’s common stock for USD 27.20 per share in an all-cash transaction valued at USD 1.8 billion.
EVG and DELO partner to expand materials and process capabilities Supplier of wafer bonding and lithography equipment for the MEMS and semiconductor industry, EV Group (eVG), is partnering with DELO, a manufacturer of industrial high-tech adhesives, in the area of wafer-level optics.
Sponsored content by Nordson ASYMTEKStart-to-finish conformal coating with reliability and efficiency Nordson ASYMTEK’s flexible, modular, Panorama™ S-Line delivers conformal coating process control in a space-saving footprint with overlapping line processes that minimize manufacturing floor space. This innovative, patent-pending line layout trims 50% of the line’s length by using the lower compartment in each piece of equipment for functional use. Combined with Nordson ASYMTEK’s global support, this complete conformal coating line delivers quality, product reliability, efficiency, and safety for all your conformal coating applications.
Osram recommends current takeover offer from ams Osram says it has concluded a business combination with Austrian chipmaker ams and is recommending its shareholders to accept the current takeover offer.
EpiWorld speeds up commercialisation of SiC devices with AIXTRON AIXTRON SE has provided an AIX G5 WW C system to EpiWorld International Co., Ltd for the further development of next generation silicon carbide (SiC) epitaxial wafers mainly used for the manufacturing of power devices for automotive applications.
FlexEnable makes acquisition for flex displays FlexEnable, developer of flexible organic electronics, has purchased Merck's portfolio of high-performance organic thin-film transistor (OTFT) materials.
Sponsored content by SourcengineComponent Aggregators vs E-Commerce Marketplaces What is the difference between electronic component aggregators and a marketplace?
67% of a buyer’s journey is now done digitally. Learn how marketplaces emerged as full-cycle procurement platforms and challenged the traditional component aggregators.
Samsung’s CPU project ends, layoffs in CA and TX Samsung has confirmed in a letter to the Texas Workforce Commission that layoffs as a result of the closure of the CPU project at the Samsung R&D Center (SARC) in Austin, Texas and the San Jose Advanced Computing Lab (ACL) in San Jose, California, will begin December 31.
Marvell completes acquisition of Avera Semi Marvell has completed its acquisition of Avera Semiconductor, the Application Specific Integrated Circuit (ASIC) business of GlobalFoundries.
IAR Systems opens office in Taiwan Swedish IAR Systems, a supplier of software tools and services for embedded development, says the company is expanding in Asia with the opening of an office in Taipei, Taiwan.
Sponsored content by EsemdaContract manufacturer Esemda opens new facility in Vilnius and expands EMS The new facility has been built with reserved space for future expansions. As Esemda constantly grows, it is of great importance to be able to rapidly increase production capacity in large volumes.
ZF and Cree partners up to advance the electric drive ZF Friedrichshafen is teaming up with silicon carbide semiconductor specialist Cree, to create industry-leading, highly efficient electric drivelines.
Broadcom completes acquisition of Symantec Enterprise Security business Semiconductor company Broadcom, says that the company has completed its acquisition of the Enterprise Security business of Symantec Corporation
AVX acquires Chengdu OK New Energy AVX Corporation says it has completed the purchase of Chengdu OK New Energy, Ltd. (COKNE).
Vesper names new SVP of worldwide sales & business development MEMS sensor company Vesper, announces that Lorenzo Ponzanelli has joined the company as senior vice president of worldwide sales and business development, overseeing sales strategy and execution to drive global growth.
Sponsored content by NCAB Group Benelux B.V.Failure is not an option for a PCB More than 30% of the Gerbers NCAB Group Benelux B.V. reviews, have problems. However, the PCB are integrated in key end-user product with more and more High Tech PCB. We are here to support you on the new technologies growth to maintain a high reliability and quality. Contact us to review it together.
Gigaphoton establishes new company in China Gigaphoton, a manufacturer of light sources used in semiconductor lithography, says it has established and started running the business of a new company – Gigaphoton China Inc. in China.
Prepare, adapt & overcome - how ‘to Brexit’ The looming, but yet unknown, effects of Brexit have forced companies to prepare for whatever may come. But how does one really prepare for unknown consequences?
Acal BFi signs pan-European agreement with Champs Technologies Acal BFi says it has added Champs Technologies to its magnetics portfolio. Acal BFi is a Europe-wide specialist technology supplier and design partner with a specialist portfolio of magnetic cores and inductive components products and services.
POET’s sale of DenseLight Semi to close POET Technologies Inc. announced the sale of its subsidiary, DenseLight Semiconductors Pte. Ltd. to DenseLight Semiconductor Technology (Shanghai) Co. Ltd. is scheduled to close on or before Friday, November 8, 2019.
Odyssey Semiconductor picks up wafer fab Ithaca, New York’s Odyssey Semiconductor Technologies, specializing in high-voltage power switching components and systems based on proprietary gallium nitride (GaN) processing technology, has acquired an integrated semiconductor design, fabrication, test, and packaging facility.
RBVC, Ford and BMW invests in flexible electric circuit start-up Robert Bosch Venture Capital GmbH (RBVC), the venture capital company of the Bosch Group, announces that it has completed a series B follow-on investment in CelLink Corporation.
Alex Davern to step down as CEO of National Instruments NI has announced that Alex Davern will step down as Chief Executive Officer of the company, effective January 31, 2020. The NI Board of Directors has appointed current President and COO, Eric Starkloff, as NI President and CEO, effective February 1, 2020.
RoodMicrotec takes leading role in APPLAUSE A consortium of 31 key players for packaging of electronics, optics and photonics, equipment suppliers and testing experts from 11 countries launched a new project, “Advanced packaging for photonics, optics and electronics for low cost manufacturing in Europe,” simply called APPLAUSE.Load more news