Ad
Ad
Ad
Ad
Ad
Ad
© carabiner dreamstime.com Components | January 18, 2013

New active light sensor interface IC from Melexis

The MLX75030 from Melexis is a universal active light sensor interface, designed for easy implementation of robust multi-channel, close range optical sensing systems into difficult operational environments.
It incorporates four independent simultaneously operating light measurement channels; two taking care of reflection and the other two for ambient light measurement. This makes the device highly optimized for inclusion in human-machine interfaces (HMI) requiring proximity detection or touch-less gesture recognition in environments subject to wide variation in background lighting levels, especially in automotive infotainment systems, white goods and consumer electronics devices.

This IC features two active light reflection measurement channels with integrated ambient light suppression. The active light sensing section is complemented by two logarithmic current sensors which can measure the photocurrent signal from externally connected photodiodes for ambient light sensing. Internal control logic, configurable user registers and SPI communication enable simple, programmable operation. More channels can be added through multiplexing. A built-in temperature sensor can be used to compensate any heat effects.

The MLX75030 controls the LED current and measures the resulting photodiode signal, which is translated into digital form by an integrated 16-bit analog-to-digital converter (ADC). This data can then be transferred to the system microcontroller via the SPI interface. The optical light intensity of both active light channels can be used to detect proximity of an object close to the detectors, independent from the background light level. Human gestures (such as swipes or zooms) can then be determined by use of software algorithms. HMI response times of 30 frames/sec are supported.

To help meet the most challenging automotive requirements the device integrates auxiliary circuit functions such as: a watchdog timer; CRC, open/short test; internal diagnostics; bias/reference sources; and clock generators.

The MLX75030 is offered in a compact (4 mm x 4 mm), 24-pin surface mount QFN package, or as a bare die. Versions supporting both standard 0°C to 70°C and extended - 40°C to 105°C operational temperature ranges are available.

Comments

Please note the following: Critical comments are allowed and even encouraged. Discussions are welcome. Verbal abuse, insults and racist / homophobic remarks are not. Such comments will be removed.
Further details can be found here.
Ad
Ad
Load more news
October 15 2018 11:56 pm V11.6.0-1