Components | October 13, 2011
Imperas cooperates with Renesas Electronics
Imperas and Renesas Electronics Corporation have been cooperating on the verification of the Open Virtual Platforms (OVP) Fast Processor Models of the Renesas V850 cores.
These models are being used with the OVPsim virtual platform simulator, usually for software testing of automotive electronics applications. Users include NIRA Dynamics, a provider of tire pressure sensor systems. Renesas and Imperas collaborated on the verification plan for the OVP Fast Processor Models of the V850 Family of CPU cores, and Renesas has supported Imperas with technology to assist in the verification of the OVP Fast Processor Models. “Imperas with its OVP Fast Processor Models is addressing key issues in software development for embedded systems,” said Hirohiko Ono, senior manager of the MCU Tools Marketing Department for Renesas Electronics Corporation. “We are happy to work with Imperas to ensure that high quality models are easily available to our worldwide customers, helping them to develop and test software faster and more easily using virtual platforms.” “In the automotive electronics industry we always need to do more testing of our embedded systems software,” said Peter Lindskog, head of development for NIRA Dynamics AB, a subsidiary of Audi Electronics Venture GmbH. “Finding that the simulation performance of the Imperas/OVP V850 model was 50 times faster than our previous solution opens up new possibilities for us in software testing, and enables us to increase our test coverage and product reliability." All OVP processor models are instruction accurate, and very fast, focused on enabling embedded software developers, especially those building hardware-dependent software such as firmware and bare metal applications, to have a development environment available early to accelerate the software development cycle. OVP processor models work with the OVPsim and Imperas simulators, which employ a state of the art just-in-time code morphing engine to achieve the simulation speed. Virtual platforms utilizing these OVP processor models can be created with the OVP peripheral and platform models, or the processor models can be integrated into SystemC/TLM2 based virtual platforms using the native TLM2 interface available with all OVP models. The native TLM2 interface enables multiple instantiations of the processor models in a single virtual platform, just as any other component would be instantiated. The OVP simulator can also be encapsulated within the Eclipse IDE, enabling easy use for software developers. “Imperas is very excited to be working with Renesas, the leader in automotive MCUs,” said Simon Davidmann, president and CEO, Imperas. “Cooperation between processor vendors and independent tool developers is critical to providing optimized flows for embedded software development.”
AKKA is now a majority owner of Data Respons Following the closing of the voluntary offer period, AKKA holds 72.89% of Data Respons’ share capital.
Sequans and Avnet sign global distribution deal Sequans Communications S.A. and Avnet have entered into a distribution agreement whereby Avnet will promote and sell Sequans’ IoT chips and modules and will exclusively promote and sell Monarch Go, an LTE-M/NB-IoT modem component designed for and certified by Verizon.
Synopsys completes acquisition of certain IP assets from INVECAS Synopsys, Inc. has completed its acquisition of certain IP assets from INVECAS. This acquisition broadens Synopsys' DesignWare Logic Library, Embedded Memory, General Purpose I/O, Analog, and Interface IP portfolio.
Qualcomm: Coronavirus may impact phone industry Chip maker Qualcomm Inc has issued a statement that the coronavirus outbreak in China poses a potential threat to the mobile phone industry.
South Korean supplier to set up manufacturing in Hungary Soulbrain, a South Korean materials company supplying chemicals used in semiconductors, displays and battery cells, is establishing its first European unit in Tatabánya in Hungary.
Seven major chip acquisitions valued at USD 1bn or more Semiconductor merger and acquisition activity strengthened in 2019 after pulling back in the two previous years from historic high levels of M&A agreements in 2015 and 2016.
Jenoptik is expecting further growth in 2020 Despite difficult economic conditions, Jenoptik continued to grow in 2019.
ams reports record results for full year 2019 Austrian sensor manufacturer ams reports that its revenues for 2019 was up 32% year-on-year, and fourth quarter revenues exceeded expectations with strong adjusted operating profitability.
Xperi enters into a patent and technology license deal with SK hynix Xperi Corporation has entered into a new patent and technology license agreement with semiconductor manufacturer SK hynix.
Communications equipment makers want high power outputs and small solution footprints Many communications systems are powered via a 48 V backplane. This voltage is normally stepped down to a lower intermediate bus voltage, typically to either 12 V, 5 V, or even lower, in order to power the racks of boards within the system.
Pennsylvania’s AMETEK acquires IntelliPower AMETEK Inc. has purchased IntelliPower, designer and manufacturer of high-reliability external battery packs and power conditioners and distribution units for defense and industrial applications.
Nuvia unveils first NA office, new leadership Santa Clara-based silicon design start-up NUVIA Inc. has opened its first international office in Toronto, Ontario, Canada.
Murata completes new production building in Japan One of Murata’s manufacturing subsidiaries – Fukui Murata Manufacturing Co., Ltd. – has completed the construction of a new production building in Echizen City on the Fukui Prefecture, Japan.
Synapse opens two offshore semiconductor design centres Synapse Design has officially opened its newest semiconductor design centers: One in Ahmedabad, India and one in Penang, Malaysia. With the addition of these two design centers, the company now has eight offshore design centers (ODC).
Amtech receives order from power semiconductor customer in Asia Amtech Systems says that its subsidiary, Bruce Technologies, Inc., has received a significant new order for its full 300mm clustered HTR diffusion furnace from a top-tier global power semiconductor customer in Asia. The furnace is expected to ship in fiscal Q1 2021.
Osram starts the year with a strong first quarter After a challenging fiscal year 2019, Osram has made a robust start to fiscal 2020. On a comparable basis, revenue in the first quarter (ending December) grew slightly by 0.5% to EUR 873 million.
Presto acquires DELTA Microelectronics business from FORCE Technology Presto Engineering, an outsourced operations provider to semiconductor and (IoT) device manufacturers, has acquired the DELTA Microelectronics business unit of FORCE Technology, the European provider of ASIC supply chain services.
Infineon: 'Our cost reduction measures are beginning to take effect' In the first three months of the 2020 fiscal year, Infineon's revenue decreased by 7% from EUR 2,062 million to EUR 1,916 million quarter-on-quarter.
Lam Research to expand global footprint Lam Research Corporation has selected Batu Kawan Industrial Park in Penang, Malaysia as the location for a new advanced technology production facility.
ON Semi looking to sell its manufacturing facility in Belgium ON Semiconductor says that it is exploring a sale of its manufacturing facility in Oudenaarde, Belgium.
TDK Ventures invests in electric air mobility company AutoFlightX TDK's subsidiary, TDK Ventures, has made an investment in eVTOL air-cargo and air-taxi company, AutoFlightX.
Microchip and Arrow collaborate on edge IoT security Microchip Technology and Arrow Electronics are teaming upp to simplify connectivity and security across industrial, smart building and energy markets.Load more news