© morgenstjerne dreamstime.com Business | June 13, 2013
Imec and Holst Centre unveil fully-organic imager
imec and Holst Centre present a large-area fully-organic photodetector array fabricated on a flexible substrate. The imager is sensitive in the wavelength range suitable for x-ray imaging applications.
Because of their very high absorption coefficient, organic semiconductors allow extremely thin active layers (10 to 50 nm). Also, given their low processing temperature, they can be processed on foils. As a result, organic imagers can be more robust and light-weight compared to their traditional counterparts and may be used for conformal coating of randomly shaped substrates. Moreover, the wide variety of organic molecules available ensures that the properties of the active layer can be tuned to applications requiring specific wavelength ranges. The presented imager is sensitive in the wavelength range between 500 and 600 nm, making it compatible with typical scintillators and therefore suitable for x-ray imaging applications. It was fabricated by thermally evaporating an ultrathin (submicron) photosensitive layer of small organic molecules (SubPc/C60) on top of an organic readout circuit. A semi-transparent top contact enables front-side illumination. The readout backplane was manufactured on six inch foil-laminated wafers. It consists of pentacene-based thin-film transistors (TFTs) in arrays of 32x32 pixels with varying pitch (1 mm and 200 µm). To prevent degradation of the organic semiconductors in the air, the photodetector array is encapsulated. The imager was characterized under illumination with a calibrated green light-emitting diode (LED), yielding a linearly increasing photocurrent from the incident power of 3 µW/cm2. Dark current density is below 10-6 A/cm2 at a bias voltage of -2V. This latest achievement is a significant step forward in not only finding the optimal materials, but pinpointing the best ways to process materials into reliable organic circuits and systems with state-of-the-art performance,” said Paul Heremans, technology director at the imec/Holst Centre. “Once again, we’re proud to demonstrate how imec’s top-notch research that leads to relevant industrial solutions, and subsequently brings added value to our partners’ businesses.”
Rebound Electronics expands in Asia The independent supplier of electronic components says it is investing to increase its market coverage in Asia with the opening of several new offices and setting up a customer service & telesales centre.
Samsung expands foundry capacity with new production line Samsung Electronics says that it plans to boost its foundry capacity at the company's new production line in Pyeongtaek, Korea, to meet growing global demand for extreme ultraviolet (EUV) solutions.
Super Dry Totech expands Long Term Storage Solutions offering The most recent development for Super Dry Totech, is the acquisition of a new building to expand on capacity & to minimise risk by assuring continuity should a disrupting incident occur in one of the facilities.
Ynvisible acquires electrochromic display company rdot Printed electronics specialist, Ynvisible Interactive, announces that it will acquire the printed electrochromic displays business of rdot AB of Gothenburg, Sweden.
Manz receives follow-up order for display production equipment Manz says it has received an order with a total volume in the low double-digit million euro range for display production equipment.
Aehr Receives initial order from new customer for FOX-NP solution Aehr Test Systems says it has received orders from a new customer and their subcontract manufacturing supplier for a FOX solution including a FOX-NP full wafer test system, an initial WaferPak Contactor, and a FOX WaferPak Aligner to perform production qualification of their silicon photonics devices.
AIM names new director of product management AIM Solder has appointed Timothy O’Neill to the position of Director of Product Management.
Seoul Semi files patent suit against automotive LED light distributor Seoul Semiconductor says it has filed a patent infringement lawsuit in the United States District Court for the District of New Jersey against Onyx Enterprise Int’l Corp., a distributor of automotive components.
X-FAB expands foundry offering for silicon-based microfluidics In order to address heightening demands, X-FAB Silicon Foundries SE, has taken steps to simplify the integration of microfluidic elements with CMOS and SOI dies.
Renesas withdraw from LD/PD business and close production Renesas has decided to withdraw from the laser diode (LD) and photo diode/detector (PD) businesses, and to close the production line at its Shiga Factory, which manufactures compound semiconductor products.
TSMC confirms its intention to build new US fab The Semiconductor giant has announced its intention to build and operate an advanced semiconductor fab in the United States with support from the US government and the state of Arizona.
Flisom to set up shop in Hungary The Swiss solar technology company chose Kecskemét, Hungary as the location for its plant of industrial capacity.
VRG Earns ISO 9001:2015 Certification VRG Components, an independent distributor of electronic components, have been awarded the ISO 9001:2015 certification.
Richardson RFPD ink distribution franchise deal with u-blox Richardson RFPD – an Arrow Electronics company – has entered into a global franchise distribution agreement with u-blox.
Imagination and BAIC Capital creates automotive joint venture Imagination Technologies and BAIC Group Industrial Investment (BAIC Capital), have signed a joint venture agreement to initiate the establishment of an automotive fabless semiconductor company.
Swissbit continues its growth trend with Ardian as a new partner Together with the management team, investment house, Ardian, is acquiring Swiss memory manufacturer Swissbit.Load more news