© daniel schweinert dreamstime.com Business | May 17, 2013
Helios program with results
CEA-Leti announced Europe is strongly positioned to design and manufacture volume silicon photonics devices because of the success of the recently completed HELIOS program.
The €8.5 million European Commission project developed a complete design and fabrication supply chain for integrating a photonic layer with a CMOS circuit, using microelectronics fabrication processes. HELIOS, which was coordinated by Leti, also demonstrated a complete design flow, integrating both silicon photonics device design and electronic/photonic system design in an EDA-compatible framework (see www.helios-project.eu) “It is strategically important for Europe to maintain photonic chip-design and chip-integrating functions to compete with other countries and to encourage innovation by European microelectronics companies,” said Leti CEO Laurent Malier. “HELIOS’s success in creating the essential building blocks for integrating photonics with CMOS circuits and making the process available to a variety of users underscores the key role that broad European technological cooperation plays in a very competitive global business environment.” Thomas Skordas, head of the EC’s photonics unit, said HELIOS has shown the large potential silicon photonics has in many different applications, such as data communications. “The technology roadmap of silicon photonics becomes clearer now. Europe will have to move fast to become competitive in this new field,” Skordas said. “Strategies for the industrialisation of silicon photonics are currently being discussed in the context of Horizon 2020, the EU's new framework program for research and innovation for 2014-2020." Silicon photonics is seen as key to developing optical telecommunications or for optical interconnects in microelectronic circuits, because of the cost advantages of integrating photonic and electronic functions on the same chip. CMOS photonics may lead to low-cost solutions for a range of applications such as optical communications, optical interconnections between semiconductor chips and circuit boards, optical signal processing, optical sensing, and biological applications. Launched by the European Commission in 2008, HELIOS focused on developing essential building blocks like efficient optical sources (silicon-based and heterogeneous integration of III-V on silicon), integrated lasers, high-speed modulators and photo-detectors. The project, which had 20 members, also combined and packaged these building blocks to demonstrate complex functions that address a variety of industrial needs. These include a 10Gb/s modulator integrated with an electronic BiCMOS driver, a 16x10 Gb/s transceiver for WDM-PON applications, a photonic QAM-10Gb/s wireless transmission system and a mixed analog-and-digital transceiver module for multi-function antennas. The building blocks also led to results exceeding the original specifications:
- High-performance passive devices were obtained and introduced in the demonstrators (rib/strip waveguides transitions with less than 0.2dB losses, grating couplers with 1.6dB losses, inverted taper couplers with 1dB losses, AWG and micro-ring based de-multiplexers).
- The wafer-level integration of laser by III-V/Si bonding led to the demonstration of single-mode operation with 3dBm output power, 30dB SMSR, Ith < 35mA in CW.
- 40G carrier depletion Si modulators were demonstrated in MZI, Ring, slow wave, interdigitated modulators configuration.
- An integrated tunable laser–Mach-Zehnder modulator working at 10Gb/s.
- CEA-Leti, coordinator (France)
- IMEC (Belgium)
- CNRS (France)
- Alcatel Thales III-V lab (France)
- University of Surrey (UK)
- IMM (Italy)
- University of Paris-Sud (France)
- University of Valencia (Spain)
- University of Trento (Italy)
- University of Barcelona (Spain)
- 3S Photonics (France)
- IHP (Germany)
- University of Berlin (Germany)
- Thales (France)
- DAS Photonics (Spain)
- ams AG (Austria)
- University of Vienna (Austria)
- Phoenix BV (Netherlands)
- Photline Technologies (France)
- University of Southampton (UK)
SkyWater chosen for volume US manufacturing of temperature sensing chip Foundry partner, SkyWater Technology, has been chosen by investment firm, Asymmetric Return Capital (ARC) and Linear ASICs, a fabless analog and mixed-signal semiconductor company, to volume manufacture a microchip with temperature sensing capabilities used in a low-cost, smartphone-enabled wireless patch that assists in the remote detection of COVID-19.
Samsung expands with new NAND flash facility Samsung Electronics plans to expand its NAND flash production capacity in Pyeongtaek, Korea, in order to improve its ability to meet demands from emerging technologies.
ASML ships first-generation multibeam inspection system ‘eScan1000’ ASML Holding NV says that it has completed system integration and testing of its first-generation HMI multibeam inspection (MBI) system for 5 nm nodes and beyond.
Cognex takes measures to counter deteriorating market conditions Machine vision technology provider, Cognex Corporation, says it is taking significant steps to reducing expenses due to deteriorating market conditions and to position the company for growth when conditions improve.
Verkotan selects PWC technology from Rohde & Schwarz Test and measurement specialist Rohde & Schwarz has recently introduced the R&S PWC200, the first plane wave converter (PWC) on the market. Verkotan is the first independent test house to choose this technology to test 5G NR FR1 base stations over-the-air (OTA).
Kurt Sievers takes the helm at NXP At its annual general meeting of shareholders, the appointment of Kurt Sievers as the company’s next CEO was overwhelmingly approved.
Excelitas’ Qioptiq subsidiary expands with new plant Excelitas Technologies, a company delivering photonic solutions, sats that its Qioptiq subsidiary held a ground-breaking ceremony last week to mark the beginning of construction for a new factory in Göttingen, Germany.
Farnell adds Sorensen power supplies to its roster Distributor Farnell announces that it has added Sorensen, the premier DC programmable power supply brand from Ametek, to its range of power supplies.
Infineon raises EUR 1 billion following successful share placement Infineon informs that the company placed 55 million new shares, following an accelerated bookbuilding process with institutional investors, under the exclusion of subscription rights. The shares were placed at a price of EUR19.30 per share, meaning that the company managed to raise EUR 1.06 billion.
Skeleton Technologies strengthens management with new COO Skeleton Technologies has appointed Ants Vill, former Vice President of Product, as Chief Operating Officer.
SiPearl chooses Germany for its first international operational subsidiary SiPearl, a designer of the microprocessor for the European exascale supercomputer, is opening its first international subsidiary in Duisburg, in the Ruhr region, Germany, in order to build closer connections with its German partners and future clients.
DELO reports increased revenues despite current pandemic DELO closed the financial year that ended on March 31 with a turnover of EUR 163 million. This is an increase of almost 5% compared to the previous year (EUR 156 million).
China falls far short of its "Made-in-China 2025" goal IC production in China represented 15.7% of its $125 billion IC market in 2019, up only slightly from 15.1% five years earlier in 2014. IC Insights forecasts that this share will increase by 5.0 percentage points to 20.7% in 2024 (one percentage point per year on average).
COVID-19 highlights the gravity of the secondary market for SME Cha Jin-Seok, Chief Financial Officer of SK Hynix, said it best in the company’s Q1 earnings call, “Because of a never experienced pandemic, even basic business activities such as maintaining normal operations and predicting future demand have become challenging tasks.”
GlobalFoundries to implement ITAR at US manufacturing facility GlobalFoundries plans to implement export control security measures at its most advanced manufacturing facility, Fab 8, in Malta, New York.
Rebound Electronics expands in Asia The independent supplier of electronic components says it is investing to increase its market coverage in Asia with the opening of several new offices and setting up a customer service & telesales centre.
Samsung expands foundry capacity with new production line Samsung Electronics says that it plans to boost its foundry capacity at the company's new production line in Pyeongtaek, Korea, to meet growing global demand for extreme ultraviolet (EUV) solutions.
Super Dry Totech expands Long Term Storage Solutions offering The most recent development for Super Dry Totech, is the acquisition of a new building to expand on capacity & to minimise risk by assuring continuity should a disrupting incident occur in one of the facilities.Load more news
- China falls far short of its "Made-in-China 2025" goal
- Raspberry Pi audio HAT board with MERUS class D multilevel amplifier
- ASML ships first-generation multibeam inspection system ‘eScan1000’
- Romanian EMS provider expands as it relocates
- Gémosz is still looking to grow – but the pandemic brought new perspectives