Current pandemic slows down business development in German component distribution
German distribution of electronic components (according to FBDi e.V.) continues to decline in the first quarter of 2020. The order situation improves slightly, at a low level. The FBDi calls for future-oriented course-setting and investments in infrastructure.
The market for electronic components in Germany cannot expect any short-term prospect of improvement, especially as the corona crisis is currently causing considerable uncertainty. This also applies to distribution. Sales of the distribution companies organised in the Fachverband Bauelemente-Distribution (FBDi e.V.) fell by 15% to EUR 818 million. While this represents a sequential improvement over the fourth quarter of 2019, it remains considerably below Q1/2019. In comparison, orders fell by "only" 2%, which achieves a noticeable improvement in the book-to-bill rate to 1.03, albeit at a low level. However, there were differences between the product groups: semiconductors, sensors, electromechanics and power supplies were affected below average, but passive components, displays and assemblies in particular suffered losses, some of them significant. Semiconductor sales shrank by 13.2% to 562 million euros, passive components by 28% to 95 million euros, and electromechanics by 12.4% to 101 million euros. Sensors (excluding semiconductor sensors) remained almost stable at -0.3%, power supplies at -9.2% at least in single digits. Display sales fell by 15.1%, assemblies and tools by 17.7%. This results in a slight shift in market weight: semiconductors fall to 69% share of the total market, passives to 11.6%, electromechanics rise to 12.4% (overtaking passives for the first time) and power supplies to 3.5%, the highest value since the 2003 survey. All other product groups together account for 3.7%. FBDi Chairman Georg Steinberger: "While in February we were still concerned with the question of how COVID-19 will influence production in China and what possible bottlenecks this might cause in the supply chain, now - at least as virus-affected - the European and American industry are challenged for recovery. As a result of the partial plant closures in Europe and the USA the overview in the supply chain is rather lost - who needs what when is probably not clear until autumn 2020. The presumed bottlenecks will most likely come later, but then with more force." Since February the mood in Europe and the USA has deteriorated massively, says Steinberger: "A PMI (Production & Manufacturing Index from IHS Markit) of 34.5 in May (50 is the threshold to positive) speaks volumes - the economic crisis squared. However, for the time being only in the mood, the year will show how bad it really gets. Basically, we still believe that in the long term our industry will play a key role in the technical and eco-friendly renewal of society". The COVID-19 crisis would have the potential to show the entire society, and thus of course the economy, the way to a more sustainable future, believes Steinberger: "What Corona has shown? We can not only wear masks and keep our distance, but we can also operate digitally! This decade will show whether we can make the transition to a more conscious, economically sensible, environmentally compatible and fairer way of doing business. Politics have to rethink their way of catering only to strongest lobbies and to invest in infrastructure that will take us to the next level of digital society. 15 years of public inertia are enough."
Ozark Integrated Circuits nabs U.S. Air Force grant Arkansas-based Ozark Integrated Circuits Inc., located in the Arkansas Research and Technology Park at the University of Arkansas, has received a USD 750,000 award from the U.S. Air Force.
Norwegian EMS adds employees to Polish unit The last couple of months Norautron has welcomed three new colleagues at its office in Sdunska Wola, Poland.
Daimler’s battery production in Kamenz gradually increases production Local battery production is described as an important success factor for Mercedes-Benz AG’s electric offensive and a key element to flexibly and efficiently meet the global demand for electrified vehicles.
Tepcomp invests in new additional production line Finnish EMS provider, Tepcomp Group, has made a significant investment at its production plant in Turku. The new surface mount technology production line will significantly improve the productivity and energy efficiency of the plant.
Valoe is on schedule with both production and expected deliveries Valoe says it will start manufacturing IBC test modules in Juva, Finland in June and cell deliveries from Lithuania to customers is scheduled to start according to plan.
AMTE Power and Britishvolt sign MoU for GigaFactory AMTE Power and Britishvolt plans to investigate collaborating to build the UK’s first full cycle battery cell GigaPlant, servicing the automotive and energy storage markets.
ALLPCB’s new SMT factory has launched production On May 10 2020, ALLPCB’s new – self-operated – SMT factory in Guangde, Anhui Province, China was officially put into production.
Schweizer starts production at its new location in China Following a construction period of one and a half years, production has now started at the company’s new high-tech printed circuit board plant in Jiangsu, China.
Jenoptik supplies generators to a US customer Through its Vincorion investment, Jenoptik received a long-term order for generators that an unnamed US customer is integrating into military vehicles.
Rolls-Royce takes heavy hit from COVID-19 – reduces workforce by 9000 The impact of COVID-19 on Rolls-Royce and the whole of the aviation industry is unprecedented. RR has already taken action to strengthen the financial resilience of its business and to reduce cash expenditure in 2020. However, this will not be enough.
Data Link Solutions to provide MIDS cabinet terminals to US Navy The U.S. Navy has awarded a USD 3.2 million production contract to Data Link Solutions (DLS), a joint venture between BAE Systems and Collins Aerospace, for new Multifunctional Information Distribution System (MIDS) cabinet terminals.
Incap restarts production in India In a move to contain the COVID-19 pandemic, the government of India instructed all state governments to introduce a lockdown in March. As a consequence, Incap had to close its factory in Karnataka, India on 23 March.
NAND Flash Revenue Undergoes 8.3% QoQ Growth in 1Q20 NAND Flash bit shipment in 1Q20 was relatively on par with 4Q19, says the DRAMeXchange research division of TrendForce. The overall ASP of NAND Flash products also climbed during the period. As a result, the global NAND Flash revenue for the quarter went up by 8.3% QoQ to USD 13.6 billion.
Gorenje reduces the number of layoffs At the end of April, due to a sharp drop in orders and revenues as a result of the COVID-19 pandemic, the Hisense Europe Group launched a redundancy program in four companies in Slovenia.
NA semiconductor equipment industry posts April 2020 billings North America-based manufacturers of semiconductor equipment posted USD 2.26 billion in billings worldwide in April 2020 (three-month average basis), according to SEMI.
AWS Electronics to wear the Incap name Following the acquisition of AWS Electronics Group by Incap Corporation in January 2020, the company's units in the UK and Slovakia will now be trading as Incap Electronics UK Ltd. and Incap Electronics Slovakia s.r.o.
PCB manufacturer SQP invests in new plasma treatment system As part of the continuous upgrade of the PCB manufacturing processes the Slovakian PCB manufacturer SQP International has invested in a new plasma treatment system.
Nordson delivers solid quarter considering COVID-19's impact on global end markets Nordson Corporation reported second quarter sales of USD 529 million, a 4% decrease compared to the prior year’s second quarter sales of USD 551 million.
Cicor expands its clean room set up in Bronschhofen Swiss EMS provider Cicor Group is currently expanding its site in Bronschhofen with a 60 square metre ISO Class 6 clean room.
Senate Dems to Trump: Release details of TSMC plant deal Democratic lawmakers are pressuring the Trump administration to respond to serious questions about Taiwan Semiconductor Manufacturing Co Ltd’s (TSMC) plans to build a USD 12 billion plant in Arizona, which the company announced last week.
SOS LAB completes series A+, inks MOU with ON Semi LiDAR sensor maker SOS LAB has secured series A+ investment funding of USD 8 million as of April.
Expanded US rules sanctioning Huawei to have little impact on memory industry TrendForce believes that the latest updates to the sanctions will have a relatively low impact, in the short term, on Huawei’s shipment of smartphones, notebook computers, and servers – products for which Huawei is relatively well stocked on components.Load more news