© ingrid prats dreamstime.com Electronics Production | December 17, 2012
Top10 Solar market predictions for 2013
South Africa and Romania will emerge as PV markets to watch in 2013, predicts information provider IHS.
“The photovoltaic industry is in the midst of wrenching change—buffeted by government incentive cuts and nose-diving prices that has hurt solar suppliers worldwide, rocked by trade disputes among its major players, and hamstrung by a sputtering global economy,” said Ash Sharma, director, solar research at IHS. “However, there are some bright spots ahead: Solar installations are on the rise, technology is becoming more efficient, and a weak EU market roiled by financial turmoil will be offset by an ascendant China and the United States.” Below are the top 10 predictions for 2013 from the IHS solar research team.
- The global PV market will achieve double-digit installation growth in 2013, but market revenue will fall to $75 billion. Industry revenues—measured as system prices multiplied by total gigawatts installed—peaked at $94 billion in 2011, but fell sharply to $77 billion in 2012. Revenue is projected to decline once again in 2013 to $75 billion, on the back of lower volume growth and continued system price declines, given that PV component prices continue to fall.
- The solar module industry will consolidate further in 2013. As 2012 comes to a close, fewer than 150 companies will remain in the photovoltaic upstream value chain, down from more than 750 companies in 2010. Most of the consolidation will involve companies going out of business entirely. Many integrated players, particularly those based in China, will fold up shop in 2013. The large expense of building and then operating integrated facilities that are underutilized will be more than many can handle financially.
- PV module prices will stabilize in 2H 2013 as oversupply eases. Despite a drastic decline in prices along the silicon supply chain since March 2011, solar prices will stabilize by mid-2013. Changes in market dynamics will help restore the global supply-demand balance.
- Solar trade wars will rage on in 2013, yielding few winners. As of November 2012, there were six different solar trade cases proceeding involving China, Europe, the United States and India. This cycle of sanction and retaliation will not help solve the fundamental challenge of overcapacity plaguing the global PV industry.
- South Africa and Romania will emerge as PV markets to watch in 2013. The two countries next year will expand from virtually no solar installations to capacity of several hundred megawatts. The PV uptake in both markets is driven by distinct factors. In South Africa, PV additions will mainly stem from the tenders awarded in 2012; in Romania, the growth driver will be a green certificate (GC) scheme that will stay in place until 2014.
- Double-digit returns remain possible for European PV projects in 2013. With the subsidy schemes that are currently in place, all EU countries continue to offer attractive conditions for both private and institutional investors. Meanwhile, an evaluation of no-incentive scenarios shows that the most mature market segments are on the cusp of grid parity, allowing healthy returns on investment.
- Solar will surpass wind in the United States. The year 2013 marks an important milestone, representing the first time that new U.S. solar PV capacity additions will be greater than those made by wind. This is partly a result of the near-term uncertainty over the federal production tax credit for wind. However, it is also a reflection of solar PV’s increasing competitiveness as a form of renewable power generation in some key U.S. markets.
- China will become the world’s largest PV market. Total PV installations in China next year are predicted to surpass 6 gigawatts, allowing the country to surpass Germany as the No. 1 solar market on the planet.
- Energy storage will transform the solar industry. Batteries increasingly are being seen as an attractive way of retaining PV electricity, letting people use the power later in the day to avoid paying high prices for electricity from the grid. Next year IHS forecasts a big jump in the number of residential PV systems installed with batteries attached.
- New technology will revive equipment vendors’ prospects. Improved technologies will help PV manufacturers cut costs, increase margins and ultimately distinguish themselves from the competition. Such a focus creates an opportunity for both manufacturers and equipment suppliers to obtain larger revenue streams.
Second install for EFI at Mid America Display Silicon Valley’s EFI will install a second EFI Nozomi C18000 single-pass inkjet, direct-to-board printer later this month to Mid America Display.
Ron Jakeman of Electrolube looks back at a successful 2019 Electrolube has been growing, both in terms of its footprint and financially, for a number of years not; Ron Jakeman details the company's progress.
Etteplan and Scanfil to start strategic cooperation in joint customer projects Engineering company Etteplan and contract manufacturer Scanfil have today agreed to enter a strategic partnership in Finland.
The lovechild of ACE Production and InterSelect Carlos Bouras of Nordson Select gave us the rundown of the result of the integration and combination of ACE Production and InterSelect GmbH - the new Integra.
Sponsored content by EsemdaContract manufacturer Esemda opens new facility in Vilnius and expands EMS The new facility has been built with reserved space for future expansions. As Esemda constantly grows, it is of great importance to be able to rapidly increase production capacity in large volumes.
American Battery Metals, U.S. lawmakers convene American Battery Metals Corporation has completed a series of meetings with lawmakers and personnel in the Department of Energy and Department of the Interior in Washington, D.C., to discuss issues critical to the domestic battery production and storage industry.
Cogiscan, Critical Mfg. form strategic partnership Quebec, Canada-based Cogiscan and Critical Manufacturing, headquartered in Portugal, have forged a strategic partnership to deliver smart factory solutions for electronics manufacturers.
Collins Aerospace expanding in North Africa Collins Aerospace Systems, a unit of United Technologies Corp., has taken the first step toward the expansion of its existing site in Casablanca, Morocco.
The advantage of Vantage - Garrett Wong tells the tale Nordson Asymtek's Garrett Wong gives us a rundown of the business year and also details the Vantage Advantage
Saki’s Eddie Ichiyama details a very successful business year Eddie ichiyama from Saki gave us an update on how 2019 has been for the company and also shared some details on the recent expansion in the Czech Republic.
The ripple effect of Enrico Krog Iversen while being an active part in creating one of the fastest growing robotics companies in modern time might have been enough for most people, that does not seem to have slowed down a certain Danish entrepreneur.
Yamaha's Ichiro Arimoto on the business year and the company's new ventures Evertiq had the opportunity to talk to Ichiro Arimoto, General Manager of Yamaha Motor Europe, about the business year and the company's new ventures.
Mycronic, Indium forge strategic partnership Indium Corporation has announced a strategic partnership with Sweden-based Mycronic, to develop no-clean and water soluble solder pastes for jetting applications.
Sponsored content by Nordson ASYMTEKStart-to-finish conformal coating with reliability and efficiency Nordson ASYMTEK’s flexible, modular, Panorama™ S-Line delivers conformal coating process control in a space-saving footprint with overlapping line processes that minimize manufacturing floor space. This innovative, patent-pending line layout trims 50% of the line’s length by using the lower compartment in each piece of equipment for functional use. Combined with Nordson ASYMTEK’s global support, this complete conformal coating line delivers quality, product reliability, efficiency, and safety for all your conformal coating applications.
SCHMID delivers PlasmaLine to Hofstetter PCB SCHMID announced it has installed the company’s first PlasmaLine comprising ICP etch & sputter deposition of its Korean JV SCHMID AVACO at Hofstetter PCB AG in Switzerland.
Cobot market to reach USD 9+ billion by 2025 A new report from Tractica is forecasting continued rapid growth for the global collaborative robot (cobot) market over the next few years, reaching revenue of USD 9.7 billion by 2025.
MixComm scores USD 8+ million in series B round New Jersey-based fabless semiconductor company MixComm has secured USD 8.6 million in series B funding led by existing investor, Kairos Ventures.
SIA elects 2020 leadership The Semiconductor Industry Association (SIA) Board of Directors has elected ON Semiconductor CEO Keith Jackson as its 2020 Chair and Qorvo CEO Robert Bruggeworth as its 2020 Vice Chair.
Sponsored content by NCAB Group Benelux B.V.Failure is not an option for a PCB More than 30% of the Gerbers NCAB Group Benelux B.V. reviews, have problems. However, the PCB are integrated in key end-user product with more and more High Tech PCB. We are here to support you on the new technologies growth to maintain a high reliability and quality. Contact us to review it together.
Si wafer shipments recede for fourth straight quarter Worldwide silicon wafer area shipments slid for the fourth consecutive quarter of 2019, according to the SEMI Silicon Manufacturers Group (SMG) in its most recent quarterly analysis of the industry.
Decline in Q4 DRAM contract prices lessens as buying momentum recovers According to the latest analysis from the DRAMeXchange research division of TrendForce, Q4 DRAM ASP is as of yet undergoing a slight QoQ decline, but this decline has shrunk down to 5%.
Technica forms growth-focused equity fund San Jose-based Technica USA has reached an agreement on an equity investment centered on future growth for the global PCB fab and assembly supplier.
IHS Markit: 5G economy in the trillions by 2035 The IHS Markit 5G Economy Study, commissioned by Qualcomm Technologies Inc., is forecasting that 5G will generate USD 13.2 trillion in sales enablement by 2035.
Sponsored content by SourcengineComponent Aggregators vs E-Commerce Marketplaces What is the difference between electronic component aggregators and a marketplace?
67% of a buyer’s journey is now done digitally. Learn how marketplaces emerged as full-cycle procurement platforms and challenged the traditional component aggregators.
ZEUS Battery partnering with Kruvand Associates ZEUS Battery Products and Texas-based Kruvand Associates Inc. have come to a formal agreement on a collaboration that began in January and covers Texas, Arkansas, Oklahoma, Louisiana, New Mexico, Arizona and Mexico.
EPP with a new owner The company announces that is has found itself an ideal buyer – Photonics Systems Group – a manufacturer of micro-materials processing machines. With this takeover, PSG is strengthening is operations in the electronics industry and also laying the foundation for further growth.
Volkswagen starts pre-production e-mobility plant in China The new plant of the SAIC VOLKSWAGEN joint venture has been completed. It is purely built for the production of all electric vehicles on Volkswagen’s Modular Electric Drive Matrix (MEB).
Kongsberg Maritime divests KM Contros GmbH Following a strategic review, Kongsberg Maritime AS (KM) has decided to divest KM Contros GmbH (Contros) to AML Oceanographic Ltd. (AML).Load more news