Electronics Production | April 18, 2012
First Solar lays off 2'000 worldwide
First Solar restructures: manufacturing in Germany will be closed, 4 production lines in Malaysia to be indefinitely idled and 2'000 layoffs worldwide.
First Solar is restructuring its operations in response to deteriorating market conditions in Europe. As part of this program, First Solar will close its manufacturing operations in Frankfurt (Oder), Germany, in the fourth quarter of 2012. Additionally, the Company will indefinitely idle four production lines at its manufacturing center in Kulim, Malaysia, on May 1, 2012. These actions, combined with other personnel reductions in Europe and the U.S., will reduce First Solar's global workforce by approximately 2,000 positions, about 30 percent of the total. "After a thorough analysis, it is clear the European market has deteriorated to the extent that our operations there are no longer economically sustainable, and maintaining those operations is not in the best long-term interest of our stakeholders," said Mike Ahearn, Chairman and Interim CEO of First Solar. "Decisions like this are not easy, especially given how important the European markets and our associates in Europe have been to the development of our Company and the solar industry as a whole. We are committed to treating all affected associates fairly, and to building our relationships with European business partners that are aligned with our strategy of pursuing utility-scale solar opportunities in sustainable markets around the world." "The solar market has fundamentally changed, and we are quickly adapting our market approach and operations to maintain and build upon our competitive advantage," said Ahearn. "After a period of robust growth, First Solar is scaled to operate at higher volumes than currently exist following the reduction of subsidies in key legacy markets. As a result, it is essential that we reduce production and decrease expenses to reflect the smaller volume of high-probability demand we forecast. These actions will enable us to focus our resources on developing the markets where we expect to generate significant growth in coming years."
Indium Corporation is ready for 2020 Chris Nash from Indium Corporation reviews 2019 - in many ways, a strange year. However, even with the geopolitical issues that the year has offered, Indium has done a good job staying on top of things.
Schmoll Maschinen GmbH settles for a record year Schmoll's soaring results for 2019 is tied to the high level of globally deployed machines, where Asia takes the lead.
Arch Systems partners with Flex for manufacturing data transformation Arch Systems, a provider of a machine-data-sensing platform, has entered into an agreement with global manufacturer Flex to supply real-time access to and analysis of manufacturing data at its facilitie
ZF and Wolong Electric form JV for electric motors ZF Friedrichshafen and China’s Wolong Electric Group are stepping up their existing cooperation. The two companies have signed an agreement to establish a joint venture that will produce components and electric motors for automotive applications.
Sponsored content by Z ElektronikaZ Elektronika opens new factory in Pécs To keep up with rapid growth of the company, on the 13th September Z Elektronika celebrated the grand opening of its new electronic design and manufacturing facility close to the highway in Pécs, Hungary, which adds new features and production site to its nearby location.
Cicor on its venture into printed electronics In the first quarter of 2019, Swiss EMS provider, Cicor, opened a technology center for printed electronics at the Bronschhofen site in Switzerland - quite the investment and a completely new territory for the company. Evertiq had the opportunity to talk to Karl-Heinz Fritz, VP of Technology, about the strategy behind this.
TT Electronics steps up its US presence – acquires Excelitas unit TT Electronics has struck a deal to acquire a US based business that designs and manufactures power electronics for defence and aerospace markets, enhancing its ability to engineer complete power converters.
ABB partners with Exeger to speed up transition to clean energy ABB has entered into a new partnership with Sweden’s Exeger Operations AB. The partnership will enable Exeger to enhance the production quality its photovoltaic material at the company's Stockholm factory and also develop automation solutions for its new fully automated factory which will begin construction in the near future.
Sponsored content by EsemdaContract manufacturer Esemda opens new facility in Vilnius and expands EMS The new facility has been built with reserved space for future expansions. As Esemda constantly grows, it is of great importance to be able to rapidly increase production capacity in large volumes.
Rehm Thermal Systems intros 3-in-1 reflow solution Michael Hanke from Rehm Thermal Systems shows off the results of the company's development work.
Intel to reclaim No.1 semiconductor supplier ranking in 2019 IC Insights says that only three among the top-15 semiconductor suppliers are forecasted to show growth this year.
Veoneer joins Autonomous Vehicle Computing Consortium Veoneer has joined the Autonomous Vehicle Computing Consortium (AVCC) to speed autonomous driving vehicle development.
Ongoing trade issues have opened up Chinese market for Viscom According to Carsten Salewski, Chinas move towards more independence has resulted in more customers from the region; especially within the automotive sector.
Sponsored content by SourcengineComponent Aggregators vs E-Commerce Marketplaces What is the difference between electronic component aggregators and a marketplace?
67% of a buyer’s journey is now done digitally. Learn how marketplaces emerged as full-cycle procurement platforms and challenged the traditional component aggregators.
Don't forget about human inclusion in industry 4.0 Michael Ford from Aegis Software is reminding the industry in the midst of connectivity that our most powerful asset is still the human employee.
East West Manufacturing acquires Adcotron EMS East West Manufacturing has acquired Adcotron EMS, a provider of specialized electronics manufacturing services, including advanced printed circuit board assemblies, box-build assemblies, testing, and new product introduction services.
Benchmark's Thailand facility earns MedAccred PCBA accreditation The EMS provider announces that its facility in Ayutthaya, Thailand has earned the MedAccred Printed Circuit Board Assembly accreditation.
HZO unveils larger HQ in North Carolina HZO, known for protective nano coatings designed to help electronics withstand corrosive liquid environments, held an open house at its new headquarters in Raleigh, North Carolina this week.
Luminator Technology relocates some production to Texas Luminator Technology Group has relocated production of its Apollo Video Technology RoadRunner mobile video security solutions to Luminator’s headquarters in Plano, Texas.
Kurtz Ersa invests heavily in development to stay on top With more than 30 percent of its employees involved in research and development, the company is making sure that it is able to respond to its customers needs at all times.
BMW's new battery cell centre to handle everything from material to prototyping The BMW Group is looking fortify its position in the world of electric mobility and has pooled its many years of experience with battery cells and extensive knowledge in the field in a new Competence Centre.
Cicor selected as production partner for drug delivery system Cicor announces that it has won a major new customer in the medical technology sector, one of the company's strategic target markets.
Keysight, FormFactor and CompoundTek to collaborate Keysight, FormFactor and CompoundTek, have formed a joint plan to provide an advanced photonics on-wafer testing solution to include automated alignment, simultaneous optical-optical and optical-electrical device tests.
Wireless Telecom buys Holzworth Instrumentation Wireless Telecom Group Inc. has signed a definitive agreement to acquire Holzworth Instrumentation Inc., a Boulder, Colorado-based provider of specialty phase noise analyzers and signal generators.
NCAB Group acquires Altus-PCB in USA Altus-PCB is a full-service supplier of PCBs based in New Jersey, USA, that has a business model similar to NCAB’s. The US company has a high level of technical expertise and sells mainly to original equipment manufacturers (OEMs).
Mycronic's Thomas Stetter looks back at a successful year As the company is moving more and more towards becoming a full solutions provider, business is taking off and the numbers show very much confirms that the Mycronic's strategy is working.Load more news