© baloncici dreamstime.com Components | November 28, 2012
University of Pennsylvania claim flexible electronics breakthrough
Researchers from the University of Pennsylvania have shown that nanocrystals, of the semiconductor cadmium selenide can be "printed" on flexible plastics.
Electronic circuits are typically integrated in rigid silicon wafers, but flexibility opens up a wide range of applications. In a world where electronics are becoming more pervasive, flexibility is a highly desirable trait, but finding materials with the right mix of performance and manufacturing cost remains a challenge. Now a team of researchers from the University of Pennsylvania has shown that nanoscale particles, or nanocrystals, of the semiconductor cadmium selenide can be "printed" or "coated" on flexible plastics to form high-performance electronics. The research was led by David Kim, a doctoral student in the Department of Materials Science and Engineering in Penn’s School of Engineering and Applied Science; Yuming Lai, a doctoral student in the Engineering School’s Department of Electrical and Systems Engineering; and professor Cherie Kagan, who has appointments in both departments as well as in the School of Arts and Sciences’ Department of Chemistry. Benjamin Diroll, a doctoral student in chemistry, and Penn Integrates Knowledge Professor Christopher Murray of Materials Science and of Chemistry also collaborated on the research. Their work was published in the journal Nature Communications. “We have a performance benchmark in amorphous silicon, which is the material that runs the display in your laptop, among other devices,” Kagan said. “Here, we show that these cadmium selenide nanocrystal devices can move electrons 22 times faster than in amorphous silicon." Besides speed, another advantage cadmium selenide nanocrystals have over amorphous silicon is the temperature at which they are deposited. Whereas amorphous silicon uses a process that operates at several hundred degrees, cadmium selenide nanocrystals can be deposited at room temperature and annealed at mild temperatures, opening up the possibility of using more flexible plastic foundations. Another innovation that allowed the researchers to use flexible plastic was their choice of ligands, the chemical chains that extend from the nanocrystals’ surfaces and helps facilitate conductivity as they are packed together into a film. “There have been a lot of electron transport studies on cadmium selenide, but until recently we haven’t been able to get good performance out of them,” Kim said. “The new aspect of our research was that we used ligands that we can translate very easily onto the flexible plastic; other ligands are so caustic that the plastic actually melts.” Because the nanocrystals are dispersed in an ink-like liquid, multiple types of deposition techniques can be used to make circuits. In their study, the researchers used spincoating, where centrifugal force pulls a thin layer of the solution over a surface, but the nanocrystals could be applied through dipping, spraying or ink-jet printing as well. On a flexible plastic sheet a bottom layer of electrodes was patterned using a shadow mask — essentially a stencil — to mark off one level of the circuit. The researchers then used the stencil to define small regions of conducting gold to make the electrical connections to upper levels that would form the circuit. An insulating aluminum oxide layer was introduced and a 30-nanometer layer of nanocrystals was coated from solution. Finally, electrodes on the top level were deposited through shadow masks to ultimately form the circuits. “The more complex circuits are like buildings with multiple floors,” Kagan said. “The gold acts like staircases that the electrons can use to travel between those floors.” Using this process, the researchers built three kinds of circuits to test the nanocrystals performance for circuit applications: an inverter, an amplifier and a ring oscillator. “An inverter is the fundamental building block for more complex circuits,” Lai said. “We can also show amplifiers, which amplify the signal amplitude in analog circuits, and ring oscillators, where ‘on’ and ‘off’ signals are properly propagating over multiple stages in digital circuits.” “And all of these circuits operate with a couple of volts,” Kagan said. “If you want electronics for portable devices that are going to work with batteries, they have to operate at low voltage or they won’t be useful.” With the combination of flexibility, relatively simple fabrication processes and low power requirements, these cadmium selenide nanocrystal circuits could pave the way for new kinds of devices and pervasive sensors, which could have biomedical or security applications. “This research also opens up the possibility of using other kinds of nanocrystals, as we’ve shown the materials aspect is not a limitation any more,” Kim said. To read the article on University of Pennsylvania's site click here
Jenoptik to acquire 100% of Spanish company Jenoptik is strengthening its position as a full-service provider of automated manufacturing solutions via the acquisition of Spanish company INTEROB. The contract was signed on January 25th and is expected to close in the coming weeks. The purchase price was slightly less than twice the revenue in 2019.
Broadcom to supply wireless components to Apple Certain subsidiaries of Broadcom have entered into two separate multi-year statement of work agreements with Apple Inc.
TowerJazz, Cadence, and KPI to open analog design lab TowerJazz, Igor Sikorsky Kyiv Polytechnic Institute (KPI), the national technical university of Ukraine, and Cadence Design Systems, are collaborating to open a new analog circuit design lab in Ukraine.
STMicro CEO: ‘We closed 2019 with a solid fourth quarter’ The semiconductor manufacturer reported 2019 fourth quarter new revenues of USD 2.75 billion, gross margin of 39.3%, operating margin of 16.7% and new income of USD 392 million.
Car supplier Harman plans to close German site The automotive supplier Harman apparently wants to stick to its plans and close the plant in Straubing (Germany). Between 625 and 700 jobs are affected.
Camtek receives orders for 34 systems from five manufacturers Camtek says it has received orders for 34 systems for 2D inspection of CMOS image sensors from five different manufacturers, of which 25 are from two customers.
Changes to Next Biometrics' management Next Biometrics' CFO, Knut Stålen, will step down from his position on the last day of February 2020. Knut Stålen has been with NEXT Biometrics since 2014.
Foxconn and Heraeus sign MoU Foxconn Technology Group and Heraeus have signed a Memorandum of Understanding for a strategic cooperation within the space of 5G.
BAE to pick up Collins Aerospace’s GPS business and Raytheon’s ATR business BAE Systems has reached definitive agreements for the proposed acquisitions of Collins Aerospace’s military Global Positioning System (GPS) business and Raytheon’s Airborne Tactical Radios (ATR) business.
JEOL Ltd. acquires Integrated Dynamic Electron Solutions JEOL Ltd. , manufacturer of semiconductor equipment and other industrial instruments and equipment, announced the acquisition of Integrated Dynamic Electron Solutions Inc. (IDES), an entrepreneurial venture specializing in technologies related to transmission electron microscopy (TEM).
NEXT receives major order for Indian government program NEXT Biometrics has received an order for UIDAI and STQC certified fingerprint biometric readers in India with a value of USD 750,000.
Cadence completes acquisition of AWR from NI Cadence Design Systems, Inc. has completed the acquisition of AWR Corporation from National Instruments Corporation.
Fiat Chrysler and Foxconn plans EV joint venture A new competitor in the industry for electric vehicles are in the making.
Collins Aerospace inks multimillion-dollar space contract Collins Aerospace Systems has signed a contract with Lockheed Martin to provide critical subsystems to support production of NASA’s Orion spacecraft fleet for Artemis missions III through VIII.
Imagination Technologies expands with new European design centre Imagination Technologies has opened a new design centre in Timisoara, Romania. The centre will focus on IP designed for artificial intelligence (AI) and computer vision.
AKI Electronic becomes Schurter Electronics As part of the further integration into the Schurter Group, AKI Electronic spol. s r.o. changes its name to SCHURTER Electronics spol. s r.o.
From Bosch to Silicon Mobility - Kallenbach takes the helm Automotive semiconductor company, Silicon Mobility, has appointed former Robert Bosch GmbH executive Rainer Kallenbach as CEO of the company as of January 6, 2020. The current CEO Bruno Paucard will remain with the company as COO and on the Board of Directors.
NEXT Biometrics reorganises - reduces headcount NEXT Biometrics says it is executing a program to optimise the organisation and cost base with its strategic priorities and market opportunities; which also translates to layoffs
LPKF delivers laser system to semiconductor industry customer In December, LPKF delivered – for the first time – a highly automated version of its LIDE system for integration into a semiconductor fab to an unnamed semiconductor manufacturers.
ROHM company SiCrystal & STMicro ink wafer supply deal ROHM and STMicroelectronics have signed a multi-year silicon carbide (SiC) wafers supply agreement with SiCrystal, a ROHM group company having a top share of SiC wafers in Europe.
Cadence expands collaboration with Broadcom Cadence Design Systems says it has expanded its collaboration with Broadcom Inc. for the creation of semiconductor solutions targeting next-generation networking, broadband, enterprise storage, wireless and industrial applications.
Marvell expands R&D footprint in India Marvell has announced the addition of its new facility in Bangalore, part of Marvell India Private Limited, the company’s second largest research and development (R&D) effort spanning three sites – Bangalore, Pune and Hyderabad.
imec spin-off raises €4,5 million in funding MICLEDI Microdisplays, the latest spin-off of imec, has raised EUR 4,5 million seed capital from imec.xpand, with participation of PMV and FIDIMEC.
Synopsys to acquire certain IP assets of INVECAS The acquisition broadens the company’s IP portfolio and adds a team of experienced R&D engineers to the company’s development department.Load more news