© photographer dreamstime.com Business | November 16, 2012
Low-End iPad mini carries $188 BOM
The base model of Apple’s new iPad mini with Wi-Fi only and 16 gigabytes of NAND flash memory, carries a bill of materials (BOM) of $188.00, according to IHS iSuppli. When the $10.00 manufacturing expense is added in, the total cost to manufacture the iPad mini rises to $198.00.
Based on the ratio of cost to retail price, IHS has concluded that the iPad mini is slightly more profitable on a percentage basis than the comparably equipped version of the New iPad when it was released in March 2012. “With the iPad mini, Apple is sticking to the premium-brand strategy it has always used for its media tablet and smartphone products,” said Andrew Rassweiler, senior principal analyst, teardown services, for IHS. “Apple’s strategy entails offering differentiated hardware that justifies higher price tags than comparable products. This differs markedly from Amazon’s 7-inch Kindle Fire HD and Google’s Nexus 7 tablets, both of which are essentially low-margin or no-margin giveaways at a $199.00 retail price. Apple makes healthy margins on its hardware, while Amazon and Google employ different strategies with their 7-inch tablets.” © IHS Amazon’s Kindle Fire HD and Google’s Nexus 7 have set new consumer pricing expectations for 7.x-inch media tablets, starting at the $199 point. These low-priced tablets pose a competitive challenge to Apple’s media tablet dominance. “Amazon and Google want to put tablets in consumers’ hands—even if it means doing so at a minimal hardware profit— with the intent of making their money on the content users buy, and/or the advertising and paid content they will be exposed to by buying the devices,” Rassweiler observed. With the iPad mini, Apple continues to garner even greater profits from sales of the higher-end tablet models that have greater amounts of flash memory. Because Apple provides consumers no option to expand the iPad mini’s storage capacity with any sort of removable memory card, the only way users can upgrade the amount of flash available on the product is to buy the higher-end 32GByte and 64GByte models. These higher-end models—with or without 4G wireless capabilities—are priced at $100 intervals, at $429 and $529. However, the incremental cost of the additional NAND flash memory to Apple is only $9.60 for the additional 16GBytes of memory and $19.20 for an additional 32GBytes of memory. This means that compared to the 16GByte model, the 32GByte version of the iPad mini generates about $90 in additional profit for Apple for every unit sold. For the 64GByte model, Apple’s profit is about $171 higher than the 16GByte version. The individual iPad mini dissected by IHS included only a Wi-Fi connection, with no 4G Long Term Evolution (LTE) wireless hardware included. Based on the preliminary teardown analysis, the addition of the 4G LTE module hardware would cost approximately $34.00. This cost excludes essential intellectual property (IP) licensing fees, such as those for CDMA/WCDMA/LTE wireless technology. The defining feature of the iPad mini is its 7.9-inch display, larger than comparable 7.x-inch tablets, whose displays are nearly 1-inch smaller, at just 7.0-inches. The iPad mini employs GF2 multi-touch touchscreen technology, which allows the touchscreen module to be thinner than competing tablets. However, the new GF2 technology also makes manufacturing more challenging during initial production by reducing manufacturing yields. This drives up pricing for the touchscreen module. The initial cost of the display and touchscreen module is preliminarily estimated at $80.00, representing a hefty 43 percent of the total BOM for the low-end iPad mini. The main display suppliers for the iPad Mini are likely to be LG Display of South Korea and AU Optronics (AUO) of Taiwan. LG Display has been supplying panels for the entire iPad line since the launch of the first iPad, and is likely to be the main supplier for the iPad mini displays. The IHS iSuppli Teardown analysis service identified Samsung as the supplier of the display in the individual New iPad that was dissected in March. It is important to note that Apple has multiple sources for many key components, such as the display. With the high price of the display module, Apple needed to reduce expenses in other sections of the iPad mini. The most notable example of cost cutting is in the processor: an A5 chip manufactured with a 32-nanometer process technology. The A5 used in the mini is a part that has been used in two other Apple products, including the latest Apple TV model—with that version using only one of the cores in the A5 32nm—as well as the latest version of iPad 2. Because of this, the A5 processor costs just $13.00, accounting for only 4 percent of the total BOM. This compares to $16.50 for the Texas Instruments Inc. OMAP processor used in Amazon’s Kindle Fire HD. “The use of the A5 is a great example of Apple leveraging a common component in as many devices as possible in order to increase purchasing volumes and keep costs to a minimum,” Rassweiler said. Despite the well-publicized legal battles between Samsung and Apple, Samsung remains the manufacturer of the processor, the same as in the iPad 2 and New iPad. The A5 is based on Apple’s own design, and Samsung simply serves as the part’s foundry manufacturer, rather than as its supplier. Other notable suppliers in the iPad mini include:
- SK Hynix and Elpida, which respectively supply the NAND flash and DRAM, which are collectively estimated to cost $15.50
- Dynapack, the maker of the $13.50 battery
- STMicroelectronics, which sells the gyroscope used in the user interface and sensor combo module.
Eyeing SiC and GaN potential – GlobalWafers team up with NCTU Advancements in 5G and electric vehicle technologies are bringing the mounting demands of power semiconductor. GlobalWafers is teaming up with the National Chiao Tung University (NCTU) to develop the third generation semiconductor material.
Phison expands with new R&D centre Taiwanese NAND Flash controller IC and storage solutions provider, Phison Electronics, broke ground on a new R&D center and inventory management in Guangyuan Science Park in Zhunan township, back in late march.
Infineon swings to loss as the pandemic continues impact target markets “Infineon has so far coped well with the challenging situation caused by the coronavirus pandemic. As a company, we reacted quickly to the new situation and established a framework that has enabled us to stabilize our business,” says CEO Dr. Reinhard Ploss.
Murata completes new production building The Japanese manufacturer’s subsidiary, Izumo Murata Manufacturing, has completed the construction of a new production facility which started back in August 2019.
Analog Devices team up with Intel to address 5G network design challenges The companies are collaborating to create a flexible radio platform that addresses 5G network design challenges and will enable customers to scale their 5G networks more quickly and economically.
Atlas Copco has acquired the technology and operating assets of iTrap The Swedish company has acquired a technology for process diagnostics and control in the semiconductor industry.
Goodix closes acquisition of Dream Chip Technologies Shenzhen Goodix Technology Co. Ltd., an integrated solution provider, has completed its acquisition of Dream Chip Technologies GmbH (DCT), a fabless German semiconductor technology company.
Rebound Electronics team up with IHS Markit The pace of change in the electronics industry continues unabated for all customer types – OEM, ODM and EMS. This is driven by all component manufacturer types – including semiconductor, passive, connector and electromechanical – dynamically changing pricing, lead time, life cycle management and more.
New management takes the reins at Würth Elektronik eiSos As of the 1st of May 2020, Dirk Knorr and Josef Wörner have been appointed as General Managers for the German business of the Würth Elektronik eiSos GmbH & Co. KG, having been a part of the management circle of the company for years.
Seasoned financial and semiconductor executive joins GlobalFoundries GlobalFoundries has appointed David Reeder as its new Chief Financial Officer (CFO).
Global Semiconductor Packaging Materials Market to Reach $20.8 Billion by 2024 The global semiconductor packaging materials market will track chip industry growth to expand from USD 17.6 billion in revenue logged in 2019 to USD 20.8 billion in 2024, a 3.4% Compound Annual Growth Rate (CAGR), SEMI and TechSearch International forecast.
Analog Devices acquires HDMI business from INVECAS Analog Devices, Inc. has acquired the High Definition Multimedia Interface (HDMI) business of Santa Clara based INVECAS.
Intel’s chief engineering officer to leave the company Changes to Intel’s technology organisation are coming. New leaders have been appointed and Murthy Renduchintala will leave the company.
Schleuniger Group acquires the business of US-based Cirris Systems Corp. Following many years of cooperation, the Schleuniger Group and Cirris Systems Corp. have signed an agreement for Schleuniger to acquire Cirris, based in Salt Lake City, Utah, on the basis of an asset deal.
Mu-Del Electronics acquires Luff Research Virginia-based Mu-Del Electronics LLC, an Ironwave Technologies Company and a manufacturer of high-performance RF and Microwave based systems, is acquiring Luff Research.
Sierra Wireless to divest automotive embedded module product line The company has announced a definitive agreement to divest its Shenzhen, China-based automotive embedded module product line for USD 165 million in cash.
The evolving GaN and SiC power semiconductor market landscape The emerging market for silicon carbide (SiC) and gallium nitride (GaN) power semiconductors is rapidly evolving from a startup-dominated business to one led by large-established power semiconductor manufacturers.
AEM acquires DB Design to expands design & application engineering capabilities AEM Holdings Ltd has acquired 100% stake in California-based DB Design Group, Inc. with its key team of designers and machinists located in California serving the Silicon Valley customer base.
Nanoscribe opens new Microfabrication Experience Center The Microfabrication Experience Center at Nanoscribe’s headquarters in Karlsruhe, Germany is opening its doors these days.
Arm expands R&D centre in Budapest The chip company will be growing its staff of developers by more than 50% at its R&D centre in Budapest, Hungary.
Apple wants its supply chain to be 100% carbon neutral by 2030 The Cupertino company says that its wants to bring its entire carbon footprint to net zero – 20 years sooner than the IPCC targets.
Bosch set to expand in Malaysia with new plant in Penang The German manufacturing giant has signed a Sales and Purchase Agreement (SPA) with the Penang Development Corporation for land in the Batu Kawan Industrial Park in Penang.Load more news